How to add scroll delay in this coding for marquee ? It will not scroll till the last character, it will disappear when first character in literal1 will touch the left side ... i want it will scroll till last ..character
I'm coding in VB.Net 2010. What's the most efficient way to create a horizontal scroller (i.e., marquee)? I've found some dead threads and ways to do it in older versions of VB, but I'm not finding anything particularly recent....
I have a tab control with two tab pages. One page has the auto scroll enabled since there is to much content in the page. The middle mouse wheel doesn't scroll the scroll bar; I have to actually click and hold the scroll bar and drag it down to scroll. Is there a property to allow this?
I am having an odd problem with the Horizontal Scroll Control in my program.I am using it to scroll a series of panels across a form.This is my code:
Private Sub scrHoriz_Scroll(ByVal sender As[code]....
The problem is that this works perfectly if I use the left and right arrows and it also works perfectly if I use the scroll bar's slider SLOWLY. If I scroll using the slider and move it quickly then the scroll gets out of sync.The small change and large change are both set to 1 and maximum is set to 8
I have a DataGridView with a panel above it, that contains a group of textboxes above each column. My DataGridView has a horizontal scroll bar. What I want to do is when the DataGridView scrolls horizontally, scroll the panel with textboxes above it, so they stay aligned.I tried handling the DataGridView's scroll event, but I'm not sure what to do with it.
I am loading several command buttons into it (one in each grid box). I have the panel set to autoscroll. When TableLayoutPanel is set to AddColumns, all works well. However, I dont want horizontal scroll, I want vertical. When I set TableLayoutPanel to AddRows, a vertical scrollbar will not appear.
How would I leave the vertical scroll position as it is and set the horizontal scroll position all the way left if it isn't already in that position? I've been using Me.AutoScrollPosition and have come up with code that is satisfactory but I haven't been able to always leave the vertical scroll position exactly as it is and just move the horizontal scroll position to the left limit.
I have a textbox that shows events on a program, which I add. I use the 'scroll bar' option on the textbox to show the vertical scroll bar, but how do I make it stay at the bottom most possible? I am using this code while I am trying to learn how to do what I want the scroll bar to:[code]But how do I get it so the scroll bar will stay at the bottom-most it can? I'd like the newest, most recent events to appear at the bottom of the textbox, and to have the user not have to scroll down every time something new is added.
From time to time, I see people asking about how to make marquee text. I recently wrote a marquee class I figured I would share, in case anyone finds this useful.
Heres The Class:
Public Class Marquee Private _CurrentText As String = "Paul's Custom Marquee" Private _text As String = "Paul's Custom Marquee"
i am also using the following code to try and scroll whilst zoomed in
Inherits System.Windows.Forms.Form Private m_PanStartPoint As New Point Private Sub picbox_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PicBox.MouseDown 'Capture the initial point
[code]....
I have set the panel to autoscroll and added scroll bars but they do not scroll far enough... They only scroll about 2cm.
I've got a form that has a ProgressBar on it. The Style is set to Marquee. In the Form.Shown event handler, I call BackgroundWorker. RunWorkerAsync(). In the old version, while this is occurring in the background, the ProgressBar is scrolling, which is exactly what I want.I copied over not only the code from within the file (i.e., the logic code) but also the code from the designer file. So, from what I can tell, there should be NOTHING different between the two files. However, in the new version, the marquee scroll doesn't occur.
Is it possible to have the title bar of your application be a marquee? The only way I know of to make a marquee currently is this:
Public Class Form1 Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick Label1.Left = Label1.Left - 10
[CODE]...
All that does is make "Label1" move from right to left across the form.. is having a marquee in the title bar possible?
I wanted a ProgressBarStyle.Marquee animation while a query is running. I don't want the user to think the application is locked up. it's really not progress just MarqueeAnimation. the issue I have is it's not running as a thread or in the background.
Private Sub ButtonExcute_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ButtonExcute.Click ProgressBar1.Style = ProgressBarStyle.Marquee ProgressBar1.MarqueeAnimationSpeed = 60 ProgressBar1.Refresh()
There is a question that I have from YEARS after working with DotNetBar Components that How do you set the Marquee style of a normal progress bar on the circular one? The circular progress bar from DotNetBar, i want to be clear.There is no "Style" Property and now I really need to know it for a project I'm doing now
I want to create a custom, good looking, marquee progressbar for my splash screen. I found a good desgin and i am trying to duplicate it, but i am not very good with System.Drawing. I would like to create the following progressbar[url]...
I was wondering if there was a way to get the marquee of a progress bar to change direction when the marquee gets to the end of the progress bar and vice versahere is a small diagram to show you what i mean[---][*--][-*-][--*][-*-][*--][---] = progress bar* = marquee
Iam using this code to browes sites AxWebBrowser1.Navigate( Me.TextBox1.Text) no how to make a progress bar run till my browser process of searching end ?
I am successfully trying to send an email message through my windows form. The only problem is when i click the button to send mail it is not showing the prograssbar. It shows after a delay or sometimes doesn't show at all.Is it due to the event handler? I have no clue and all i need to first show is the progressbar when the send button is clicked and then when sending message is successful or unsuccessful then hide progressbar and display the Txtmessage.text.
Public Sub SendEmail() ProgressBar1.Visible = True Dim client As New SmtpClient() Dim sendTo As New MailAddress(To.Text)
I need help with the progress bar control. I can only get it to show or display in the Marquee mode, even though I have tried setting it to Continuous and Blocks. I have tried setting it programmatically at run time and in the IDE properties. I get the Marquee style every time no matter what I do. What am I missing here? I must be doing something wrong somewhere!Paul Abell
I need to make a marquee control in vb.net, but I need it to run completely in a different thread, but I can't update the UI of the control outside the main thread.
i have a standard login form that allows the user to enter username and password and click OK or cancel. I have a progress bar called pbLaunch with the visible property set to false and the animation set to marquee. when the user clicks OK i would like to run a separate thread called bgwProgress that makes the progress bar visible and fires up the marquee just to show that something is happening while form1 loads up.....so far i'm stuckn the ok click event i have the following:
Try Dim bgwProgress As New System.ComponentModel.BackgroundWorker bgwProgress.WorkerSupportsCancellation = True
I have a vb.net MVC3 Razor app that generates PDF files. The problem is that if 2 seperate users click the print button at the same time it throws the following exception..:
The process cannot access the file 'E:webxxxxxxxxxxsonlPDF_FilesMailingLables.pdf' because it is being used by another process.
All of the controller actions to do with printing are basically like below:
Function Ind_Cert(ByVal firstName As String, ByVal lastname As String, ByVal classRef As String) Dim _Attendance As attendance = db.attendances.Where(Function(f) f.Completed_Class = "Completed" And f.firstName = firstName And f.lastName = lastname).FirstOrDefault
[code].....
This error happens like I said any time 2 users try to generate a PDF file at the same time.
Intent: To teach the user how to create a control that scrolls text at an adjustable speed across the control.What you'll need:Visual Studio.NET (2002 or 2003) - The version I built this with is 200325 Minutes of free timeI don't remember what prompted me to create this control, except that I was sitting at my desk one day and thought to myself?
1. First open the Visual Studio IDE.
2. Select 'New Project'.
3. From the project languages, select 'Visual Basic'.
4. From the project types, select 'Windows Control Library'.
5.Once the initial project has finished loading there's a couple of things that you may want to do first. The first one being, change the control name to something that means something. "UserControl1" just won't do, so in the 'Solution Explorer' right click on the "UserControl1.vb" file and click 'Rename'. Without removing the '.vb' file extension, type the name of the control. In this case lets call it 'ScrollingMarquee.vb'.
6. Now back to the control design area. Add a timer control to your project from the toolbox. Set the enabled property to 'True' and set the interval to 100. Right click on the control area (the actual control itself, not the timer) and click on 'View Code'. This will take you to the code area of project.
7. Enter the code as is written displayed below.
Code:Imports System.DrawingImports System.Drawing.Drawing2DImports System.ComponentModel Public Class ScrollingMarque Inherits System.Windows.Forms.UserControl #Region " Windows Form Designer generated code "
[code]....
Just want to make sure that each time we move the control or resize it,'it re-renders correctly.Invalidate()End SubEnd Class8.Next select 'Build -> Build ScrollingMarquee'.9. Once you have any bugs worked out (there shouldn't be any, but in case there are), you can change the build mode to release and rebuild the control for use in your projects.
I have the following sub that displays the progress (the Animation speed is 50 - but I've tried with other values)
[Code]...
I should mention that the control is created dynamically and placed on a dynamically created TabPage that in turn is added to the main tab control that is on the static form (Form1) that is refreshed - but I do believe that 'Refresh' should ripple though to all sub controls?