I'm trying to set the ValueMember property on a ComboBox column of a DataGridView, from the designer in VS2010.Every time I set the value, at the moment of leaving the cell, it revert to (none).Same thing happens with the DisplayMember property.
View 1 RepliesI have a small problem. DataGridViewComboBoxColumn display value from ValueMember and not from DisplayMember. The grid work fine and when I select somthing from this column I see DisplayMember value but when focus lost the grid show ValueMember. I have this code combo box column:
statusCBoxColumn.DataSource = dt 'datatable with two fields StatusId and StatusText
statusCBoxColumn.DisplayMember = "StatusText" 'is type NVarchar
statusCBoxColumn.ValueMember = "StatusId" 'is type Int
[Code]....
how do I overcome it? I have created a class and compiled into .dll This code
[Code]...
In Visual Studio 2008, if I do this:
[Code]....
Does anyone here know how to get the above to work WITHOUT warnings being generated?
In the following code i get a warning at line 59:Warning 1: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated.and.. At line 78 I get this Warning:
Warning 2 Property 'SelectedCustomer' doesn't return a value on all code paths. A null reference exception could occur at run time when the result is used.
The program compiles and runs well, but i cant' undesrtand the reason for these warnings. Any Idea ?
1: Public Class Form1
2:
3: 'Form level members
4: Private objCustomers As New ArrayList
[code]....
Cannot appear to be able to get this function to not have the above error.Private Function GetIncidentActions(ByVal FromAgentID As Integer, ByVal ToAgentID As Integer, ByVal incidentAction As Integer, ByVal ActionDate As Date) As String
[Code]...
So I am trying to code a cancel button that when it is clicked, will revert the changes made to the form and then close it. One idea that I had was on the form load event declare variables to store original values. However since that would involve declaring them as global, I did not want to go that route. With that said my question is: What is the best way to revert changes to a form without having to declare a bunch of global variables. Since i was storing all these form's control values into My.Settings, all I needed to do was use
[Code]...
i'm using vb 2010 to write a program for my school. i'm asking the teachers to key in their student's curricular activities into a program through datagridview. i manage to restrict the code they enter by validating it in the datagridview cellvaluechanged event handler. my idea is as follow.
1. teacher enters code in the datagrid.
2. vb check the the value and if it is in the database then update. if not then give a preset value "-1" as no record.
these are my code...
Private Sub DataGridView1_CellValueChanged(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellValueChanged
Dim Cn As New ADODB.Connection
[Code]....
my problem is... is there a way so that when the teacher enters an INVALID CODE and leaves the cell by mean of pressing "enter" or by clicking at other cells, the cell edited before is remain focused and the value before is revert back?
I have two files. My form and a module with helper functions and the definition for a structure. For some reason, when I call finish_up, which should calculate how much freespace a disk has, the values just revert to their original bytes value. However, if I put a msgbox inside the function, the correct information is displayed. Just not once it goes back to the form.
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Disks As New List(Of DiskData)
Search_Disks(Disks)
Finish_Up(Disks)
For Each x As DiskData In Disks
[Code] .....
The finish_up sub should go through each diskdata structure, find if it isready, calculate freespace and size down to their proper amounts and then just send it back. I don't understand where the problem is.
I have written some code to get the data from a number of text boxes all named in the style txb_[column name]
I want to write this data to a datatable.
The text boxes were initially filled using a row 'aIndex' from the datatable, then the user can edit the data.
When this code runs, the text boxes all revert to their initial values, regardless of any changes made to their contents during runtime.[code]...
I'm "cloning" objects in my code. For instance: objClone = objOriginal My question is: Does the assignment operator in VB.NET 1.1 do a member-by-member copy of the objOriginal to objClone or does objClone simply point as a reference to memory referenced by objOriginal?
View 3 Repliesi changed a class variable to shared so i can access it in all instances of the class, but it caused an error. what is causing this, and how can i fix it?
Private
Shared img As Bitmap
Me
.img = bgImage
I have 2 tables Table A & Table B Table A has the table values that I want to be populated in a datagridview control.The challenge is that column 1 in table A contains an ID(foreign key) to a name field that is a located in table B. I need the datagrid to have the first column be a combobox that displays the names(from Table B) that are already in table A via the ID's, but reference the populating values from Table B. So that when you bring down the combobox you would be choosing from Table B data but populating table A with the ID and you would see a name there instead of an ID.[code] How do I populate my DS dataset with Table B? And how can I create a link to these two tables using a bound datagridview control?
View 1 RepliesI get this error if I follow these steps: Change property Y of an object (an associated entity property)
Attempt to submit changes At this point the value of Y and the value of X (the underlying key) are not in agreement -- LINQ to SQL apparently doesn't synchronize these until GetChangeSet is called.An expected error occurs due to some business logic or database level constraint during the update operation.At this point the value of Y is in agreement with X because GetChangeSet was called.Change the value of Y to Nothing (aka null).Call GetChangeSet.
The error occurs on the last step because the value of X and the original value of X (returned by GetOriginalEntityState) are different, and the new value does not agree with Y? Is that why? Is this a bug in LINQ to SQL. Must be because I don't see the same behavior if I change Y to another (non-null) value instead during step 5. What's the right way around this? I can see a few ways:
Discard the DataContext when an error occurs and leave the UI as-is. I don't like this because then optimistic cocurrency change conflicts cannot be detected. The new context doesn't have the original values in it that were populated at the same time the UI was populated, so if the UI has any stale values in it, they will cause data in the database to revert.Refresh the datacontext (OverwriteCurrent) and leave the UI as-is. I don't like this for the same reason as #1.Refresh the datacontext (OverwriteCurrent) and re-populate the UI. I don't like this because then the error message just presented to the user does not show the user the error they made and allow them to correct it. It also discards all the other changes the user may have made.When the error occurs, explicitly retrieve the key for Y that corresponds to the original value of X and reset Y, then call GetChangeSet to re-synchronize X (X is read-only or private so I can't reset it directly). This seems to work, but seems like a hack, and may require lots of code for other similar errors.
I know I have done this before and as I remember it should be really easy. But for some strange reason I can't do it now and I am about to jump off the building.I will make it simple:Two tables, one is just a list of products and their code.The other table: "details" has a field named product. I want to store only the code there.In the second table's entry form, I am putting a combobox. This combo box should display the list of products, their names, but depending on which one is selected, the code is what is passed to the table "details". Currently If I set the display member to product and the value member to code it still pases the product to the binded data source.
View 3 RepliesI have a database that holds information about a particular job. One of those things is a customerID. CustomerID links to another table containing customer details. I have a combo box attached to a custom object that holds customerID as the valuemember and CustomerName as the displaymember.The JobDetails holds the customerID info. How do I set the default selection in the combobox based on the ValueMember of the combo box?
View 2 Repliesin VB.NET you implement an interface like this...
Sub SomeInterfaceMember()
Implements ISomeInterface.SomeInterfaceMember
End Sub
while in C# you do it explicitly like this (which can only be called via the interface)...
void ISomeInterface.SomeInterfaceMember(){}
or more simply, implicitly like this...void SomeInterfaceMember(){} // Note the name matches the interface member However, regarding VB, I can also do this...
Sub SomeRandomMemberName()
Implements ISomeInterface.SomeInterfaceMember
End Sub
In other words, the method that handles the implementation can have a completely different name than the interface's member name.I'm just wondering if there's something similar to this in C#. (Yes, I know I can simply do an explicit interface, then access it via another 'wrapper' member with a different name that simply delegates to it, but in VB.NET?
i'm working in VB.net,i'm newto vb.net. i have Datagridviewcomboxcolumn in my project, i want open a form at run time it should open when i press F2 key onDatagridviewcomboxcolumn. but Datagridviewcomboxcolumn has no any events. how
View 1 RepliesI have datagridview containing 4 columns with 2 combobox. With the initial loading of datagridview I could select an item with the combobox, but when I tried to select an item with other combobox I've got an error showing "System.ArgumentException: DataGridViewComboBoxCell Value is not valid. To replace this default dialog please handle the dataerror event" . When ever I click it's always shows this message.
[Code]...
i add a datagridviewcomboboxcolumn to my datatagridview and fill it with data like this: 1:a 2:b now, when user select an item i want to display only the number for value?what can i do? this is the project:download
View 6 RepliesI have a dataGridView control with a DataGridViewComboBoxColumn column, the question is Which event of the dataGridView I must use to detect when the user change the selected value of a particular DataGridViewComboBoxColumn?
View 1 RepliesI have datagridview containing 4 columns with 2 combobox. With the initial loading of datagridview I could select an item with the combobox, but when I tried to select an item with other combobox I've got an error showing "System.ArgumentException: DataGridViewComboBoxCell Value is not valid. To replace this default dialog please handle the dataerror event" . When ever I click it's always shows this message.
[Code]...
I have a datagridviewcomboboxcolumn which has its .DataPropertyName set to a int field, its .DisplayMember set to a nvarchar field and its .ValueMember set to a int field on a lookup table. I have captured a dataerror which states that the control is trying to push the .DisplayMember(nvarchar) to the .DataPropertyName(int) field. When I load existing data it works fine. When I try to leave the datagridviewcomboboxcolumn after selecting a different value in it or leave it when I add a new row, I get the error. What am I doing wrong?
View 1 Repliesi want a datagridviewcomboboxcolumn with 2 column.see the name in colum1 and choose code in column2 or something like this:see the name and code but on select just show code?!
View 5 RepliesI need to get the selected value of a ComboBox in a DataGridView. I have it partially working, but I get a Null Reference Exception if I change a another ComboBox in the grid.[code]...
View 5 Repliesi have a bound dgv. i populate a datagridviewcomboboxcolumn like this and add it to my dgv:
With comboboxcolumn
.DataPropertyName = "JobID"
.DataSource = RetrieveAllJobs()
.ValueMember = "JobID"
.DisplayMember = "Description"
[Code]...
I have one record in my Job table stored as <None>. How can i set that record to be a default value for each row?
i have a datagridviewcomboboxcolumn that i am trying to populate. i set up the DataSource property using the wizard, there after i selected the DisplayMember from a corresponding drop down of fields from the table set up in the DataSource and then lastly i selected a field to be the ValueMember. problem is when i run my program datagridviewcomboboxcolumn is not populated.there is no drop down at all. what should i do to see my drop down or perhaps i need to set up in code.
View 1 RepliesI read a lot topic in this forum about how to set a SelectedValue in aDataGridViewComboBoxColumn but nothing was useful for me. I dont know why, maaybe I dont know understand the problem.ets see: I have a DataGridView where one column is a DataGridViewComboboxColum. filled it. know read the selectedIndex with a EventHandelr and one Delegate created in the DataGridView EditingControlShowing event.This is the class with I Fill the DataSet for the ComboBox.
Public Class Expample1
Private code As String
Private name As String
[code].....
Before I get started let me tell you guys that I have googled and read the documentation from the codebank. Especially jmcilhinney's post. Here is my problem. I have a nicely working datagridview on my form.
[Code]....
how to get selected DataGridViewComboBoxColumn values in vb.net?
View 1 Replies