I have my index.aspx file:
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="index.aspx.vb" Inherits="Web_Socket.index" %>
<!DOCTYPE html>
<html>
[Code]....
so now my question is how do i connect the WebSocketServer.cs to the index.aspx ?
As a start, all I'm trying to accomplish is just to get the Web Sockets working, and have the connection established, which then will alert("Stock Ticker Connection open ...");
I wrote a Socket Client which will send the Socket Server some data and get some response from Server. This process will be running once in every 2 seconds.
Now what I need to know is How we can identify the connection lost between Server and Client?
I need this to be implemented in the Client side. If there is no connection then Client should automatically close the connection. Once the connection with the server is available in the next attempt it should connect automatically.
I am using socket programming in vb.net to create a server client remoting application. The problem occurs when I use both the client and server in a win 7 box. It works fine for win xp or cross-platform communication (e.g. win xp to win 7). Below are the codes used at the client and server end:
[Code]...
I'm working on an application that communicates to torque controllers on the factor floor. The user inputs an IP address and a port and clicks the btnConnect button to make the initial connection. Once that completes a KeepAlive message must be sent periodically to maintain communication with the torque controller. The initial connection works very well but a socket error (see below) grinds everything to a halt when the KeepAlive message is sent. I would appreiciate any ideas the readers may have on the root cause. I'm quite confused because basically the same code is use for both the initial connection and then the KeepAlive messages. I have pasted some of the code as well below.
[code]...
I am trying to make a class that will allow me to open a socket, leave it open and then write to it when needed. I wrote the following code but whenever I call the writeData sub I get an error with the network stream. Its says it is not an open connection. I call the connection sub first and then the writeData sub.
Imports System.Net.Sockets
Imports
System.Text
Public
Class vizSocketConnect
[Code] .....
I have codes which is written with python. I am not good with python and i want to convert this python codes to VB 2010.This python function searching local network and finding my LG TV's local IP adress. I want to find my TV's local IP with VB 2010.
[Code]...
Am developing a server - client application using the system.net class , that will have more than 5000 simultenous client connection.what is the best way to manage multiple client connection like this?
View 3 RepliesI converted some codes from python to VB 2010. My aim is sending query data to multicast IP and get the response. My query data receiving from device which is connected to my LAN. Also the device responding my query and my PC receiving the responce but at this point the VB program freezing.getting response data and printing to console without freezing.
This is the code list;
Imports System.Net
Imports System.Net.Sockets
Imports System.Text
[code]....
Here is the Wire Shark (Network Protocol Anlyzer) screen shots; My computer IP is : 192.168.0.11 and device's IP is : 192.168.0.10.
I have the following code in my Server Form:
Imports System.Net, System.Net.Sockets
Public Class ServerForm
Private serverSocket As Socket
Private clientSocket As Socket
[code]....
for the first time, when I click on Connect, it is going to connect to server as well and also it works if you click on the disconnect. for the second time if you click on the Connect button, it gets connected but the disconnect button is not working.
I am trying to use the code from Microsoft for an Async Socket connection. It appears the listener runs in the main thread locking the GUI. I am new at both socket connections and multi-threading all at the same time. Having a hard time getting my mind wrapped around this all at once.
[Co0de]...
i need a little advice/help here. There is a particular scenario that is coming up and I am clueless as to how to go about it."I will soon have a lease line through which I will get realtime stock market data. This data will be available every second and it will contain prices of stocks. Now assume I am able to get that data on my local computer. How can I transmit data so that users can get that data through my software.
For e.g. assume it's 11 AM. Now if you select a stock e.g. Google, then my program should fetch data for google till 11 AM and also show new data every second or so with minimum lag. Something like a terminal where you see stock prices getting updates every second. In my case I need to get past data and show current data which get updated at short intervals."
Now I have a linux vps webserver which hosts my site. (I get one or two static ip free) What to do so that data goes from my local computer to my server and then my program (developed in vb.net) is able to get it and show it to end user. This whole system should such that its fast (real-time) and delay is minimum.
im trying to detect if the connection is still active upon trying to send or receive anything. Now I have checks in place if it's connected then it will send or receive however... it's saying it's connected when it is not connected... and therefore my program tries to send and receive and errors.
I am determining if it is ok to send and receive by using the Socket.Poll(-1, SelectMode.SelectWrite)
if it's true then im connected and data can be passed..This seems to always be true until I send something and it fails..How can I catch the socket not being connected before it fails upon sending or receiving?
For almost a week I am reading and trying to find a solution for checking connection state using a TCP Client (using socket class) In my scenario I have a TCP Client that is connected to a server (it is not controlled by me) and i want that from time to time to check the connection state, and reconnect if necessary.I have read a lot of information on the internet but i did not find a suitable solution.Briefly, these are the methods that i have found on the internet and try to implement.But unfortunatelly, i have found some scenarios where the TCP Server is closed and the TCP Client is still saying Connected 1.Example from MSDN
[code]...
I would like to know can we use a socket connection on vb to communicate with PC without using GSM modem and SIM card.for example, like sendin a simple text msg to the PC and it will reply back the result back to me the result.
View 1 RepliesI want both the client and server to write and read resp. at a constant rate (which can be configured on the GUI of the client) to the buffer.I am able to send from the client at 150 bytes per packet Now, I should be able to read also at 150 bytes per packet on the server too Since, both are connected through a socket, can we retrieve the socket params (set on the client size, like 150 here) from the server end, using the tcpServer object.Or is it must to send an initial setup packet which tells about these client params and so accordingly the server can continue?
View 1 RepliesI have a problem reading data from an RFID-reader. I connect to the reader by tcp and wait for DataAvailable to be true, then reading the data until I got a end of data character. Then I just go back and waiting for a new DataAvailable. This is done in a own thread for the function.
There seems to be some kind of timeout, If I don't got any data in a couple of minutes, then it just sits there in the do/loop waiting for DataAvailable. I hold the card to the RFID reader, it beeps, but there is no data available. I don't get any exeptions, and the information says that the clientsocket is still connected. Are there anything more I can check?
If I put the card to the reader in a minute-interval it seems as this will never occur. So 2-3 minutes idle:ing seems to do this.
Here are my code to read data from the socket, I have taken away some irrelevant code:
Sub test(ByVal ip As String, ByVal port As Integer)
' this sub is meant to run forever
[CODE]......................
Below is my code, but when i send the message thru client socket i receive Specified argument was out of the range of valid values. Parameter name: size
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim serverStream As NetworkStream = clientSocket.GetStream()
Dim outStream As Byte() = _
System.Text.Encoding.ASCII.GetBytes("0800822000000000000004000000000000000920092126012345001")
[CODE]...
How do I assign a My.Settings.Item connection string to cmd.Connection connection string value?
Dim cmd As New SqlCommand()
cmd.Connection = My.Settings.Item("csStaffHoursWorked")
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "spSaveDeltekImport"
Is there a way to display the connection properties dialog for connection string browsing(for database) in run time?
As I want the user to be able to connect to various database using the GUI.
i have an application. which is executed after every 5 mins. i have an open connection but it gives me the following error:
ExecuteScalar requires an open and available Connection. The connection's current state is closed.
my code is something like this. I have shown where all i am using ExceuteScalar()
Sub Main()
Try
connection.open()
cmd.ExecuteScalar()
[code]....
After running the following sub (VS debugger), I try to detach the database in SSMS, but it shows the connection open still and won't let me detach. If I close program in debugger, the database shows no connections. I check the dataadapter's connection in the finally block and is shows closed. What gives
Private Function ClientMasterDBFiles(ByVal MasterClientDBConnection As String, ByVal DBName As String) As DataTable
[Code]...
I have a simple scraper. It works on some websites, but on some there is this Error:
Quote:
IOException was unhandled Unable to read data from the transport connection: The connection was closed
It is occuring at "Dim htmlresults As String = Urlcontents.ReadToEnd()".
'Create the HttpWebRequest object
Dim req As HttpWebRequest = WebRequest.Create(URL)
'Set the timeout to 1 second (or 1,000 milliseconds)
req.Timeout = 10000
[code]....
I am attempting to write a program that will disable the Local Area Connection while leaving the Wireless connection enabled. My company is using net-books in our stores to demo air-cards and we need to keep them off of the LAN. I'm new to VB and VB.net, and it's been a while since I did any type of programming. I've gathered some code that others have posted in forums and tutorials and I'm working through a tutorial book, but I finally believe that I am stuck.
[Code]...
i make a class and when i call on form then that error occurs "ExecuteNonQuery requires an open and available connection, the connection Current stat is close "
Class Code isImports System.Data.SqlClientImports System.DataImports System.StringPublic Class DatabaseKits Dim Cn As New SqlClient.SqlConnection Public Function BuildConnection() As Boolean Try Cn.ConnectionString = "Persist Security Info=False;Integrated Security=True;Trusted_Connection=Yes;database=BizAimsPro2008;server=Server-2k3s" BuildConnection =
[code]....
I am connecting to a data stream that pushes data continuously and when I tried to set up a network stream I just could not connect and kept getting the 'not found' error. I used the httpwebrequest with webrequest.keepalive = true and started to consume the data by reading into a buffer and then appending to a stringbuilder. Once the stringbuilder reaches max size I flush it to a text file. The problem is that I get disconnected from the data stream because I am not reading the data fast enough. I need to keep the connection open and read the data while ensuring data gets stored in text files. If I use method "CONNECT" it does not connect to the stream.
While (True)
webrequest = DirectCast(Net.WebRequest.Create(url), HttpWebRequest)
webrequest.Credentials = New System.Net.NetworkCredential(username, password)
webrequest.Method = "GET"
[code]....
should I increase the buffer size and if so what is the max? that would mean I can read more data at a time and keep up with incoming push. Disparate here.
ACtually also I noticed that it gets stuck on this line
numbytesread = responseStream.Read(bufferread, 0, BUFFER_SIZE)
and then eventually I get disconnected.
I am connecting to a data stream that pushes data continuously and when I tried to set up a network stream I just could not connect and kept getting the 'not found' error. I used the httpwebrequest with webrequest.keepalive = true and started to consume the data by reading into a buffer and then appending to a stringbuilder. Once the stringbuilder reaches max size I flush it to a text file. The problem is that I get disconnected from the data stream because I am not reading the data fast enough. I need to keep the connection open and read the data while ensuring data gets stored in text files.If I use method "CONNECT" it does not connect to the stream.[code]
View 1 RepliesI understand the possibilities for encrypting a connection string in .net v4. I have a win forms application that will be used by multiple people on different machines. I understand that I need to protect the connection string at time of the app being first run on the target machine. However I am concerned that for a period of time my connection string will be unencrypted. I am looking for advice in how to deploy my app with the connection string already encrypted or encrypted during installation. encrypting the connection string in a secure way?
View 1 RepliesTry If functionmode = "ADD" Then
[Code]...
I got this error..The connection was not closed. The connection's current state is open.
This is coding to add data in Ms access in vb...
Imports System.Data.OleDb Public Class Form1
[Code]...
I'm developing a device app in VB.net that will access a SQL Server database. I need to establish a connection when the app is launched, and keep the connection open until the app is closed. I've done the following:In the Master Module:
Public CNN
As SqlConnection
In the Main menu form load:
CNN =
New SqlConnection(sqlConnString)
CNN.Open()
Then when I want to read from the database:
Dim sqlDR
As SqlDataReader
SQL = "SELECT Name FROM Table"
[code]....
When I run the same code without the global CNN, but rather dim the connection inside the Select function, all works well.