Call A Method That Started On A Background Thread On The UI Thread Calling BeginInvoke And Passing In A Delegate?
Aug 27, 2011
I am trying to call a method that started on a background thread on the UI thread calling BeginInvoke and passing in a delegate as follows:
Dispatcher.BeginInvoke(Function() UpdateApplicationDataUI())
to call this method:
Private Sub UpdateApplicationDataUI()
...
End Sub
However, I get an error in the call to BeginInvoke (the UpdateApplicationDataUI portion of the delegate is stating "Expression does not produce a value").
Me.Dispatcher.BeginInvoke(Function() New Action(AddressOf UpdateApplicationDataUI))
View 1 Replies
ADVERTISEMENT
Feb 1, 2010
Disclaimer: I know that Thread.Abort is evil. I'm using it as a last resort since some I/O functions (e.g., File.Exists when used on a non-existing network share) block for a large amout of time and do not allow you to specify a timeout.
Question: Is it possible to Abort (as in Thread.Abort) a worker thread started using Delegate.BeginInvoke or do I have to do the Thread handling myself?
View 2 Replies
May 20, 2009
How do I dynamically call a function with delegates by passing a string to a background thread in VB.NET?
Currently my code is this
Public Sub invertImageBK(ByVal image As Bitmap)
Dim snxl As System.ComponentModel.BackgroundWorker = createBW()
snxl.RunWorkerAsync(New ImageProperties(image.Clone, "invertImage", Nothing))
[Code].....
View 1 Replies
Jul 25, 2011
So from the comments section where this persons code was translated to VB.NET on [URL]it shows a little code to aid in calling cross thread UI stuff.
<System.Runtime.CompilerServices.Extension()> _
Public Function SafeInvoke(Of T As ISynchronizeInvoke, TResult)(ByRef isi As T, ByRef [call] As Func(Of T, TResult)) As TResult
[Code]....
Error 1 Data type(s) of the type parameter(s) in extension method 'Public Function SafeInvoke(Of TResult)(ByRef call As System.Func(Of frmLogin, TResult)) As TResult' defined in 'GvE.Globals' cannot be inferred from these arguments. Specifying the data type(s) explicitly might correct this error. C:GvEGvEfrmLogin.vb 37 9 GvE
I'm calling that code from inside a method defined in a form but that method is being called from another thread.
Just trying to avoid delegates and this is what the code above is supposed to do, but just can't get it to work.
View 1 Replies
Sep 2, 2010
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
View 4 Replies
Nov 17, 2008
I'm having some problems with updating a form from a background thread, started in the MyApplication_Startup sub.As far as I know updating forms or controls on forms have to be done threadsafely.
When the application starts up, some threads are being created which create an object in which a download for a zipfile will be started. The object has some delegates to let the GUI know what the status of the download is, for example 'started' or 'finished'. Also the mainform will be shown on which a datagrid has been placed to show the user which files will be downloaded and in which phase the download is.
All this works amazingly fine but when I want to update the datagrid's cells p�r thread the datagrid aint updated. I know the problem is that the thread in which the Form is created isn't the same as the thread which wants to update the grid?
View 4 Replies
Jun 10, 2011
So, I'm having troubles implementing a separate thread. This is because I have a simple class, and in it I start a new thread. So, as it is not any form, I haven't found any way to make it call the function in the UI Thread.
So, I cannot use the Invoke method. Is there any way to call a function from another thread?
View 2 Replies
Oct 4, 2010
What is the Invoke syntax to marshall data from a background thread receive callback method to a function on the UI Thread?(Form1).
Public Class Form1
MyDelegate = New DisplayData(AddressOf DisplayData)
Private Sub Form1_Load()
MyDelegate = New DisplayData(AddressOf DisplayData)
[code]....
View 12 Replies
May 14, 2010
I am looking for a way to pass a class method into a new thread. On my form I have a few object that contain methods.
For example obj1.doWork.
Now I want to do
Example
Dim t as new Thread
t = new Thread(AddressOf obj1.doWork)
t.start()
However I get an error on this saying:
Error1Overload resolution failed because no accessible 'New' is most specific for these arguments:
'Public Sub New(start As System.Threading.ParameterizedThreadStart)': Not most specific.
'Public Sub New(start As System.Threading.ThreadStart)': Not most specific.
View 11 Replies
Dec 29, 2009
I have a class that runs as a thread. While the thread is running, I want to call a method in that thread. I do this commonly where a thread calls a method in the GUI with a delegate. But I'm confused how to do this when the called thread is not the GUI and there are no parameters passed to the called method.
View 8 Replies
Nov 25, 2011
I have am using a Twitter streaming class library, and would like to update a listbox when a new tweet is posted. I have it all set up to the point where a message box will show when a tweet comes in, but when I try to insert this tweet into a listbox I get this error: The calling thread cannot access this object because a different thread owns it. I don't know what I need to do in order to insert this tweet.
View 4 Replies
Oct 31, 2010
My routine to check for updates is run as a separate process. Exiting the application is required to update, so a dialog asks the user, when an update is found, if they want to exit now. f they do, the code (from the update thread) calls Application.Exit().However, if the FormClosed event of any form that needs to be closed needs to access its controls, an invalid cross-thread operation is detected (which sounds pretty logical).
View 1 Replies
Jun 8, 2009
I am trying to call a method which has two parameters using thread. How can I do this? If I pass parameter to my thread.start() method, it is giving error.
View 1 Replies
Nov 23, 2009
put method in main thread from background without declaring delegates
View 2 Replies
Dec 4, 2008
A non-UI thread in my prog needs to obtain data from a UI listview control. To prevent cross-thread errors I use the following, but it freezes the prog (probably because the "Else" part is never called).What am I doing wrong?
[Code]...
View 2 Replies
Dec 31, 2010
I'm reading data from a serial port, but the DataReceived event of SerialPort is handled on it's own thread. I want to handle this on the main thread, but simply declaring an event and raising it still results in it being processed on the SerialPort thread. I'm assuming I need to declare a delegate I can call, but I don't see how that would work.
For example, I want to call Sub HandleDataReceived() on the main thread from the DataReceived thread, having HandleDataReceived() run on the main thread. How would I do this?
View 1 Replies
Aug 13, 2010
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
View 3 Replies
Nov 3, 2011
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
View 4 Replies
Jul 21, 2009
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
View 7 Replies
Jun 21, 2012
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
View 3 Replies
Feb 17, 2012
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
View 2 Replies
Jun 6, 2010
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
View 4 Replies
Feb 9, 2011
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
View 8 Replies
Apr 1, 2010
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
View 3 Replies
Jun 6, 2009
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
View 1 Replies
Aug 4, 2009
Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
View 1 Replies
Feb 9, 2010
I've created a Delegate that I intend to call Async.
[Code]...
View 2 Replies
Feb 7, 2011
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
View 12 Replies
Aug 5, 2009
I have a GUI which executes on the GUI-thread. Further I have another thrad which does video processing using DirectShow (this is COM).
- Now I want to execute a function on the same thread as where the videoprocessing is executing. This is initiated by the GUI-thread. Touching the COM-referenced object goes wrong if a execute the function from another thread (I understand that). When a call the function from the same thread everything goes fine. But to do this I have the poll some flag-bits in the mainloop, and that is not a 'pretty' solution...
All discussions on the internet are about how change the GUI from a different thread.
I have tried several things:
1) Invoke the function using a delegate. This doesn't wordt, since the function is executed in the GUI thread. (checked bu ThreadID's)
2) BeginInvoke the function using a delegate. May be .net executes the function in a original thread where the object has been created. This does also not work: .net used random threads (probaby from the threadpool)
3) ISynchronizeInvoke, Threading.SynchronizationContext and some other features seems only to work on the GUI thread only...
The question: Is there a way to Post, Send of Invoke a delegate on the specific thread (for example by a reference to this thread or threadID)
View 12 Replies
Mar 3, 2012
i have a background thread when it is done doing its task it notifies the main thread via a delegate sub it seems if the main thread is "busy" then the background thread hangs waiting for the main thread. if this is normal, which i assume it is my background thread, starts another thread, and this 2nd background thread makes the delegate call is this bad practice?
View 2 Replies
