I have create a simple app in vb.net that receive data from a bluetooth device ( data are simple strings like "90123.9mm"). Is there a way to check if the device has closed the connection ?
[Code]...
for example i have this code :
Sub Month()
Dim Conn As New Data.OracleClient.OracleConnection
Conn.Open()
Try
Dim Cmd As New Data.OracleClient.OracleCommand
With Cmd
[Code]...
What will happen to the datareader when the Connection is closed ( Conn.close)
Will the Cursor that is used by the datareader be freed ? or will it stay open ?
If the cursor that is used by the datareader is still open , when will it be automatically closed ? or should i just closed it manually ?
Will it cause the dreaded "ORA-01000: maximum open cursors exceeded" ?
i have an application. which is executed after every 5 mins. i have an open connection but it gives me the following error:
ExecuteScalar requires an open and available Connection. The connection's current state is closed.
my code is something like this. I have shown where all i am using ExceuteScalar()
Sub Main()
Try
connection.open()
cmd.ExecuteScalar()
[code]....
I have a simple scraper. It works on some websites, but on some there is this Error:
Quote:
IOException was unhandled Unable to read data from the transport connection: The connection was closed
It is occuring at "Dim htmlresults As String = Urlcontents.ReadToEnd()".
'Create the HttpWebRequest object
Dim req As HttpWebRequest = WebRequest.Create(URL)
'Set the timeout to 1 second (or 1,000 milliseconds)
req.Timeout = 10000
[code]....
Trying to read data through the virtual COM port created by bluetooth.
The original console program (and the trimmed version below) was designed to read data from serial port COM1 and output the data to notepad. The program works; hook the bar code reader to COM1, activate bar code reader, swipe card, bar code reader beeps, data input collected from COM1 and sent out to notepad.
The problem: Bluetooth is wanted instead of serial cable.
We disconnected the serial cable, we connected a USB bluetooth receiving device onto the XP. XP installed the bluetooth device drivers 'Generic Bluetooth Radio' and 'MS Bluetooth Enumerator'. Bluetooth detected the bar code reader device and created COM5 outgoing SPP slave and created COM6 incoming.
But now; activate bar code reader, swipe card, bar code reader beeps, NO data input collected from COM5.
[Code]....
How is the Bluetooth connection by Visual Basic Dot Net readers and text sent by the Bluetooth
View 2 RepliesTry If functionmode = "ADD" Then
[Code]...
I got this error..The connection was not closed. The connection's current state is open.
This is coding to add data in Ms access in vb...
Imports System.Data.OleDb Public Class Form1
[Code]...
I'm developing a device app in VB.net that will access a SQL Server database. I need to establish a connection when the app is launched, and keep the connection open until the app is closed. I've done the following:In the Master Module:
Public CNN
As SqlConnection
In the Main menu form load:
CNN =
New SqlConnection(sqlConnString)
CNN.Open()
Then when I want to read from the database:
Dim sqlDR
As SqlDataReader
SQL = "SELECT Name FROM Table"
[code]....
When I run the same code without the global CNN, but rather dim the connection inside the Select function, all works well.
I'm trying to insert a new records into database, one of those records is a "datetime"...when I type a wrong date, and try to insert those values into database, i get an error (about wrong typed date etc.)...ok, that's fine, things need to work that way. But here comes the problem, I correct the date, and then try to insert values again...here I get an error from the post title. And this doesn't work until I close that form and run it again...here's part of my code:
Dim cvLicence As New SQL
Try
cvLicence.upis("INSERT INTO blabla (itsnotimportant) VALUES ('something')")
MsgBox("everything's fine", MsgBoxStyle.Information)
[code]....
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
exitwithout()
[code].....
i use vb 2008 office 2007 , it's a powerpoint add-in application. I need to use a window form as a bluetooth interface.the working procedure is like that when i click the Enum button, it will help me to search for available bluetooth devices.but now i have an error, it shows "WCL ERROR: Specified transfer is not available"
[Code]...
is it possible to create application for my mobile phone Sony Ericsson to remote control my program using Bluetooth connection which have simple functions?I have came across one program that is able to do that which is floAt's Mobile Agent. It can control from media player, powerpoint slides and even mouse cursor movement.
View 10 RepliesI am using the visual studio 2008 but use the guide for 2oo5 .I wonder why the program show error after click the load button (btnload). I am following the http: [URL] and having problem with the 'Filling the DataSet'. Is it because of different version?
The code I use:
Public Class Form1
Private Sub Ordered_booksBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Ordered_booksBindingNavigatorSaveItem.Click
Me.Validate()
Me.Ordered_booksBindingSource.EndEdit()
[Code] .....
I have this as my transactions code and I'm having an error connection closed . Iv tried fixing it with odb.open but i dont know where should I put it
[Code]...
I have a problem connecting to an access database. I'm currently trying to build a login/register program that reads the username and password from a database and allows login if the specified username and password are found. I have code that will work properly for that so that's not an issue. However, when I make an attempt to register a new username along with a bunch of other things such as email, password, etc. I am unable to because the database connection is closed. The code I'm currently using to open the database connection is :
[code]...
However, when I try to use this code to open the connection to the database, it leaves the connectionstate closed. I decided to then build in as a test, a block of code that would check on load to see if the connectionstate is open or closed. Each time I've run it so far by making a few changes it always tells me that the connectionstate is closed no matter what I do.
I am using crystal report (procedure bind) which is not releasing connection when I exit from report. I am passing parameter to crystal as :
[Code]...
Which closes connection in UI but not releasing connection of crystal report.
Im having 2 errors when loading the form the first one is: "The connection was not closed. The connection's current state is open" and the another one says "Conversion from string "" to type 'integer' is not valid" and everytime I change cmb_Suc appears: "The connection was not closed. The connection's current state is open" [Code]
View 5 RepliesI have a form that contains a crystal report viewer. When I open this form, it runs a report. I am using a .LDB viewer to tell who is logged into an access database. I noticed that when this form opens, the computer logs into the database and stays logged in. Even when the form is closed, the computer is listed as "logged in". If I run the report again, it just adds another instance of that same computer logged in. Therefore, it continues to pile up logins until the application is closed.
View 1 RepliesI have a fat VB.NET Winform client that is using the an old asmx style web service. Very often, when I perform query that takes a while or pass a large amt of data to a web service in a dataset, I get the subject error.The error seems to occur in < 1 min, which is far less than the web service timeout value that I have set or the timeout value on the ADO Command object that is performing the query within the web server.It seems to occur whenever I am performing a large query that expects to return a lot of rows or when I am sending up a large amount of data to the web service. For example, it just occurred when I was passing a large dataset to the web server:System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the rem
View 3 RepliesI have an application that copies a file from a network/internet location. I am trying to catch the exception for when the network connection becomes unavailable (or internet goes down). Currently i catch the exception "Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host." which occurs on the bold, underline line below.The issue i have is i try and attempt the operation to continue doing what it was doing by resetting variables and then reassigning them to continue reading the stream but cant get past this error. The only way to go past it is to stop and start the application which is not what im after. [code]
View 1 Replieswhile looping through a short XML file called from xmltextreader retrieved from a webservice, I'm repeatedly getting the error: The request was aborted: The connection was closed unexpectedly. it constantly dies a row or two from completing the parsing.here's my short code:Code:
'Get the principal-id for Group Dim url As String = "https://xxxxx.acrobat.com/api/xml?action=principal-list&session=" & strCookie xmlRead = WebRequestToServer(url) Do While xmlRead.Read If xmlRead.NodeType = XmlNodeType.Element Then If xmlRead.Name = "principal" Then strGroupID = xmlRead.GetAttribute("principal-
[code]....
Below error is thrown in a already opened program which connects to different database
A transport-level error has occurred when sending the request to the server.
(provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
Program details: code done using vb.net with MSSQL 2008 as back-end
Two instance of same exe where running simultaneously in same PC but error was thrown only by one instance Program uses both sqlconnection(ADO.NET) and ADODB connection(upgraded from VB6) and the error is thrown by both types of connection. If the error is due to network problem with the server then why few programs work fine? I am not able to trace the reason for this behavior of the program. Can I know why this error occurs and why only in few programs of same instance.
When I call the restful service with the following code, I am getting the error
[Code]...
I am still working on a POS application in VB.Net 2003. What I need to do is check the state of the cash drawer. I want to make sure the drawer is closed before a cashier is allowed to move on to the next sale. The cash drawer I am using is a MMF ECD200 (not sure if this will make a difference). Here is the code I am using to open the drawer:
[Code]...
I need to know if a form2 is already open when a button1 on form1 is clicked. I found the following code which fails when I open form2 then close form2. When I click button1 on form1 nothing happens. Is there a way to reset form2 to nothing or is this just wrong?
Sub isFormOpen()
If xmlTest Is Nothing Then
xmlTest.Show()
OpenXML(filename)
End If
End Subdavidbell
I am trying to save "Closed" when i click on check box [code]Conversion from string "TRUE" to type 'Double' is not valid.
View 10 RepliesI am a ASP Classic Programmer, professionally for a little over a year, I have developed some rather nice sites, including the one in my signature (Still a work in progress).
I have been forced to use ASP.NET (VB) for a FileUpload control, as it offers a self controlled way of creating Thumbnails, without the use of 3rd party controls, which is great, as my hosting server does not allow for 3rd party installs on their servers.
So.
The code below is what I have so far for connecting to the database and displaying a record is the "cookie" exist on the users computer.
Unfortunantly, this is not working, and to be honest with you, their is not a whole lot of resources available to show how to do this correctly.
So I am stuck with a lot of post and hoping that someone can actually assist me with this and tell me what I am doing wrong and maybe correct my code.
I am getting an error about the "Connection is closed"
If you want to re-write my code, I prefer something simple and basic, as the only thing that I am doing to checking rather the user is logged in, and if so, display a record from the database. I am NOT in the need for the DataGrid, so please do not suggest it, as I am only needing to check this one thing.
I would like to also add, that I have successfully contect to my database with the FileUpload control and save file names of the images uploaded, so I know that my connection string is done properly> But, for some reason the "SELECT" statement is causing a HUGE issue. (It was easier to insert, than to select, I am not use to that)
CODE:
I'm creating a program (Which will eventually be a service) which loops a section of code which downloads files from a variety of FTP servers.All files are succesfully downloaded on the first iteration, however after this the download fails with the following error..."The underlying connection was closed: An unexpected error occurred on a receive."Curiously, the error does not occur if the loop only downloads the same file from the same Ftp server. It only occurs when 2 or more files are downloaded.I use the following code...
Dim fwr As FtpWebRequest = CType(FtpWebRequest.Create(Supplier.FTP_Address & Supplier.FilePath & Supplier.FromFile), FtpWebRequest)
'Set credentials
fwr.Credentials = New NetworkCredential(Supplier.Username, Supplier.Password)
[code]....
In our VB 2008 we are making a lot of connections to sql server 2005 databases. Is there a possibillity to check with a program or a tool of 2005, all connections are closed?
View 3 Replies