Checkboxes Doesn't Post Back - Checkbox On GridView Always Returning False
Jan 22, 2012
I have a GridView with a Checkbox on the first column: Code: The thing is that the Checkbox.Checked always returns False. How can I get the checked state of the Checkboxes in this scenario? Or what would be the best approach into updating the aforementioned column? P.S. Note that click on the checkboxes doesn't post back. Nothing happens on the page until the user clicks Save (and that is the intended behavior).
I've read a few articles talking about checkboxes always returning a false state,[code]I though it was due to the second input that it was always returning a false state.
i have this code for saving my DGV as a comma separated text file:[code]It saves fine, but where checkboxes are unchecked, or "false" in the text file, these show as blank columns which then throw errors when i reopen the text file into the datagridview.how can i get my code to save checkboxes which are not checked as a "false" value.
I am new to programming.I am making a coin tossing program for class.It is telling me I need to create a separate method that doesn't take any arguments and only returns false for tails and true heads.Not sure if a function or a sub returns only that type of data. Also once the code is returned I can then add that to a CONST to keep a running total.If the method only returns true or false do I need to put the code in buttonclick sub to post the image of the coin in the picturebox using a if then statement? Would I also need to add the code for the print out of the statistics after the if then statement? Not asking for code just a step in the right direction.
This is probably a really basic (no pun intended) question, but I can't seem to find an answer anywhere.Why does the result of func1 return False and func2 returns True? On every other test I have done, integer 1 is converted to boolean true and 0 to false. Works ok if I just set rtnValue to 1 or 0.
When I click save on the view, the model being sent to the save method of the controller has no values set, they're all default values. I'm actually using the exact same technique from another project... The data is populated just fine in my view, I can edit it and click save, the code enters the SetSiteTerms method in the controller but has none of the data from the view.
Model: Imports System.ComponentModel.DataAnnotations Imports System.Runtime.Serialization <KnownType(GetType(SiteToA))> _ Public Class SiteToA <ScaffoldColumn(False)> _ Public Property ID As Integer = 0 [Code] .....
I've updated my view and controller. Why my model is populated, can be editing in the view but when I post with the save button, the model sent to the controller has no data???
I have a thumbnail generation routine that I created using WIC for a .NET app. It has been working fine for the past year, but we just migrated to a new server.
[Code]...
I have checked and the picture data is valid data. The exact same picture works fine if I run the code on the old server.
I have a CheckBoxList on my page that isn't behaving very well.The idea is that once the submit button on the form is clicked, the app should clear the database table of all rows pertaining to the specific user and then re-insert new ones based on the user's CheckBoxList selections.The problem is that regardless of whether or not any (or all) items in the CheckBoxList are selected, the app keeps getting Selected = False.[code]I'm aware of the potential for SQL Injection here. I'll be going over to using Parameters as soon as I have the loop working.
if one installer class in my project and in custom action doing some procedure to validate the serial key using user interface editor during setup creation. while installing the set up if the condition is not true the setup in rolling back it is installing.
I have an asp:checkbox control on an aspx page I am working on. This checkbox is within a custom control and previously was posting back every time it was clicked. I am in the process of ajaxifying the page and have come across a problem. When I remove the attribute AutoPostBack="True" from the asp:checkbox, the vb code returns False when I check myCheckbox.checked (this is on a postback else where on the page what has not be ajaxified), even though I can see the box is indeed checked.
I am assuming that because the checkbox no longer posts back, for some reason the VB code (or the view state maybe) doesn't see it as having been checked. Is this correct, and if so, how to I correct it?
Its my understanding that by adding the ScaffoldColumn(false) annotation to an property in a class, that property will not added to the view when doing Add View. However even though i have added scaffoldcolumn false to properties i dont want added to a Create form, they are still rendered inthe create view. Is ScaffoldColumn broken? On page 552 in Pro ASP.NET MVC 3 Framework by Freeman and Sanderson, it states "If we want to exclude a property from the generated HTML, we can use ScaffoldColumn attribute. When the scaffolding helpers see the ScaffoldColumn attribute, they skip over the property entirely; no hidden input elements will be generated and no details of this property will be included in the generated HTML.
" Also the MVC Music Store PDF on p 77 indicates that the attrtibute will do the same -"Allows hiding fields from editor forms".They add it to the AlbumId property and then when the app is run AlbumId field is not shown in the browser. Is this attr broken?If i change a html helper to DisplayFor it does not appear in the form regardless of whether scaffoldcolumn is present. For example i dont have scaffoldcolumn false on Property PostTitle but if i change @Html.EditorFor(Function(model) model.PostTitle) to displayfor then it does not render regardless of the scaffoldcolumn attr. Also my Create view is strongly typed to @ModelType RiderDesignMvcBlog.Core.Entities.Post?
For some reason, I can't change the checkbox from True to False when I click the checkbox in my DataGridViewCheckBoxColumn called "Select". I setup my DataGridView (dgvWBFOrphans) with 5 TextBox columns that are Read-Only and 1 CheckBox column that is not Read-Only. I use a stored procedure and data reader to load the DataTable which is used as the DataSource for dgvWBFOrphans. I want all the checkboxes to default to True and allow the users to uncheck certain rows in the "Select" column.
Dim dtOrphans As New DataTable Using cnn As New SqlClient.SqlConnection(clsDBConn.clsDBConnections.prpConnString) cnn.Open()
I would like to make a applcation that after checkbox inside datagridview is checked. After calcuation stuff, if result less than standard, then it set the checkbox to not checked state. But I find that checkbox in datagridview does not change. It changed after I click other checkbox. What I want is lagging one cycle. I tried dgv.refresh() or update event , no effect.
i have a checkbox bound to a column with datatype character to my database... the column uses values Y and N.also, just like to add that i have tried changing the column into character of 5 byte so that it can hold the values "True" and "False" when the property bound is the property Checked. this works okay but there are some columns that doesn't use True and False like in my statement above.is there a way that i can set my checkbox to checked when the column value it is bound to is Y and vice versa.. i noticed that in the checkbox inside a datagridview has the properties TrueValue and FalseValue but i dont see this anywhere in the checkbox not in the datagridview.
I have a situation where I need to ignore parts of page load sub inside a isPostback = true. Basically inside the isPostBack I want something like if button1 caused postback.... do this else do this...
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
To make this easier I will use a concrete example using movies and genres. A genre can be associated with many movies. Genres can increase over time and so can movies.
The use case is as follows. The user wants to filter movies by selecting his/her desired genres.
So, I have a page where at the top there is a section where the user can pick any combination of genres to filter on using checkboxes. Below that is a list of movies that are in those genres.
In MVC I am trying to implement this using a ViewPage(of IDictionary(of Genre, Boolean)) where the boolean is whether or not a particular Genre has been selected for filtering.
I then go into loop that creates checkboxes for them to select:
<% for each genre As KeyValuePair(Of Genre, Boolean) in Model %> <%=Html.Hidden("genre[" & i & "].Key", genre.Key.ID)%> <%=Html.CheckBox("genre[" & i & "].Value", genre.Value)%>
[Code].....
I am aware this can be done using Ajax and I will most likely do it using Ajax but I would still like to know why this doesn't work.
there must be a way to prevent the postBack then using the client side ) , i have a button when clicked it calls a javascript function from the code behind , but before it does this it post back the page , Question is : how can i skip the post back step and jump to the javascript part ?
<script type="text/javascript"> function hello(name) { alert("hello world from javascript " + name) return false;
Ok, so I have a small program I am building for my boss to keep track of workers at certain job sites. With the way the economy is going my boss wants to track who is showing up at specific sites (jobs) and try to even it out among all the employees - some are not working full time.
Anyway, I have two Access tables linked together with the main table being Employee Data. The second Table is Employee Jobs. Basically I have three forms. The main form on startup will show all of the employees in the company - this is basically a list of all added employees into the database (this is the second form - adding employee info). At a quick glance I would like to have the initial startup form, with grid - show employee info, show the number of jobs each employee has been assigned to. Would this be an SQL statement? How to I get a row count and post that back to the grid so it shows up on startup?
I am using MS Visual Studio 2205 Version 8.0.50727.42 and MS.Net Framework Version 2.0.50727 SP2 I created a form that requires the user to enter a date into the textbox.I then use the IsDate function to check if the entry is a valid date. IF Not IsDate(fieldname) then send message back to user on form, otherwise continue.If something like this is enterred - 06/090/10 - It passes the IsDate question and of course fails at the database level when inserting to a datetime field. Although there is a three character day, it still passes.
I am having some issues in attempting to display a recordset from my webservice. Currently my application involves a client feeding their values into my webservice.The webservice will then call a vb.net database class, which executes a SQL stored procedure, returns a recordset to the database class, and the class will pass the recordset back to the webservice, which will display it to the client in xml.
The problem I am having passing the recordset from the database class back to the webservice in a format that can be sent back to the client. I can't seem to convert the recordset to string format. Would it be better to have the record returned in XML format?
i am trying to figure out how to go about creating dynamic checkboxes on my form when i do not know axacctly how many boxes i will need.The problem is that i do not know how to DIM more than one object. This is my code for creating one checkbox
Dim heckBox As New CheckBox() Form1.Controls.Add(checkBox) checkBox.Location = New Point(10, 10)
I am reading values from a database 0/1 false/true to populate the checkbox .The databse field is 'PPorCollect'. How can i figure out why the checkbox is not populating ?
OpenSQLConnection() Dim mcommand As New SqlClient.SqlCommand("up_loadOrderID", conn) mcommand.CommandType = CommandType.StoredProcedure[code]....
I populated a textbox with the value i was reading from the database.....Interesting the value is True/False not 0/1 like i was expecting...so i changed up the above code to the below code with no resolve....
Dim PPorCollect As Integer PPorCollect = mReader("PPorCollect") If PPorCollect = False Then[code]...........
MVC 3. VB.NET application.. I am trying to pass a id along to keep track of which record a file name needs to be saved in.. The problem is that the id is getting passed into the view but on post back to the controller it is being lost...I have hammered on this for hours now and I am stuck...
My code behind is VB.NET. I use ASP.NET UpdatePanel like the following. However, after the post-back, it locks TextBox controls , I cannot type anything, except when I move the mouse over and click on the TextBox.
why it locked all TextBox controls after the post-back?
Here's why I use UpdatePanel:
During the post-back, after inserting data into DB, set all TextBox text property to String.Empty After the form is submitted, the Panel pStudent should be refresh , not the entire page and the TextBox txtId should be in focus again.
I have 11 asp.net checkboxes in my asp.net webusercontrol .. i want when checkbox1 is check thenrest of all checkboxes will be checked and if checkbox is uncheck then rest of all checkboxes will be unchecked how to do it if all my checkboxes are inside webusercontrol panel1.
