I'm trying to make a small program that helps cashiers to practice typing barcode on their machine. Barcode consists 12 numbers, and it can start with 0. Below are the code I worked on so far.
[Code]...
Iam trying to Check Values Of 2 textboxex .. n then Print A certain Amount.
[Code]...
I have 14 values, that change constantly. I need to know how to check each value against each other to see if they are within 250 of each other. [code] I want these two values in the listbox to blink red in the list box. but i always want each value to check every value in the list box. i dont even know where to start short of programming each possibilty with a if than statement and that would take forever
View 1 RepliesI want to check if two combobox values are equal. The comboboxes are in a datagridview.I found you need to use datagridview_EditingControlShowing to add a handler to the comobo boxes for selectedindexchanged. I can do this with this code.
Code:
Private Sub dgridRegisters_EditingControlShowing(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewEditingControlShowingEventArgs) Handles dgridRegisters.EditingControlShowing
Dim combo As ComboBox = CType(e.Control, ComboBox)
[code]....
However, the message box comes up for every combobox in my datagrid when I change the index, not just the cmbPort2. I would like to have something like this...
If cmbPort1.selectedindex == cmbport2.selectedindex then
'do something
endif
..but it doesn't seem possible.
Im trying to check to see if a value of a label changes over time. however I can't seem to get it right.
dim val1 as string
dim val2 as string
private sub form1_load()
dim val1 = label1.text
end sub
[Code]...
problem is it will only check it once after ten seconds when the timer is set to 10 seconds i need to to check it every 10 seconds becuase these values display altitude, and if the server freezes the altitudes dont change. I need to make sure they are updated and not frozen.
I have a form where when the user clicks the button the values of the form are stored in SQL database. I want to write code in order to check if a specific textbox-value already exist in the database table (in the field "Name"). I 've tried writing something but it doesn't work properly.
View 2 Repliesam new to VB.NET and i was wondering if anyone here knows how to check for duplicate values in strings?
View 11 RepliesHow I could go about checking a typed value in a combo to the values in the combo box. I am making a system to select lockerID and Supplier ID I want the user to be able to enter the value in the combo box as well as select the value form the list in the combo box. Here is the code I have been trying.
If cboStockID.Text = "" And cboStockID.Text <> cboStockID.Items.ToString Then
MsgBox("Please enter Stock ID")
Exit Sub
ElseIf cboSupplierID.Text = "" Then
MsgBox("Please Enter Supplier ID")
Exit Sub
End If
I'm basically putting some validation logic around an undo button on my form and i'd like to check whether any fields on the form have had their values changed so i can ask the question "abandon changes?". This seems like something pretty standard to me but I can not see how to check whether a value has had its contents changed (without recording a before value and comparing it to the after value which for large forms would be quite horrendous to code).
In the language i used to use we used to walk the object tree (so we dont have to specify each object individually like text box, combo box etc) and check any object that have value-changed = yes to indicate the validation was required.
I have tried to solve this myself and I know I am probably doing something really silly here what I have is two different registry values that control what is displayed in the combobox on my form RegistryKey1 has the following values:0,1 or it does not existRegistryKey2 has the following values2,3, or 4 the combobox has the following values 0,1,2,3 However here is the problem if the RegistryKey2 is 2 then it further has to be checked if RegistryKey1 is either 0,1 or does not exist
if it is 1 then the selectedindex = 0
if it is 0 or does not exist then the selectedindex = 1
if RegistryKey2 is 3 then the selectedindex = 2
[code].....
as title says. and if it has the same values, delete one of them and add (2)
so itll be like: - before the filter:
[Code]....
I have a form where two fields on the first page of the form make up the primary key. I want to check for duplicate values before attempting to insert the record, since I don't want the user to go all the way through the form only to find out they can't submit it. So I'm trying to check for duplicate values when the user tries to go to the next page of the form. I wasn't quite sure how to do it, and sure enough I'm getting an error. ("Object reference not set to an instance of an object.") The problem is apparently in my if statement, "If myValue.Length > 0 Then", but I'm not sure what needs to be in place of that.
Protected Sub CustomValidator1_ServerValidate(ByVal source As Object, ByVal args As System.Web.UI.WebControls.ServerValidateEventArgs) Handles CustomValidator1.ServerValidate
'get values
[code].....
I have declared a class in VB.NET using VS2K5 with some shared variables and made that class a dllI made use of that dll in another project and tried to make use of those variables. Even though I can able to make use of them, Im unable to view the values of those variables like the values of normal variables when Im debugging. Is there any way that I can watch the values of those shared variables during debugging.
View 1 RepliesI have a DataGridView1 populated by sql searches. On the rare occasion that nothing is returned, my app cannot make use of data so I'm trying to check for null values. My code below is not correct because IsDBNull is not a member of the of the DataGridView1.
If DataGridView1.SelectedRows(0).IsDBNull Then
MsgBox("Nothing to display")
Exit Sub
End If
Basically I have a form which has 2 drop downs. In the 1st drop down I am selecting City category. When the city is selected I want to update the 2nd drop down values in correspondence to 1st value choosen in 1st drop down. I have done like this,This adds the value in the 1st Drop Down:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim s As String = "connection String"
sqlconn = New SqlConnection(s)
[code]....
I've never really used the Check List Box in the past, however, for the recent program I am developing, I am using this control rather than individual check boxes scattered across the form.Anyway, I want to be able to program through code which items get checked in this checked list box. Specifically, I have a variable that contains the text of each check box that I want checked.With a normal check box, I can simply say:
Dim strNames As String
strNames = "John Doe, Mark Johnson, Mike Brown, Cindy Smith"
If strNames.ToString.Contains("Mike Brown") Then[code]....
So I'm writing the equality operator overload (Operator =())for a custom object, and the resulting mess of If conditionals is just an eyesore. But so far, it seems like the only sane way to check the values to as to match the specific behavior of this object.
The rules are:Num1 is required, period, and both the left and right operands and must be equal for True. Else, False.Num2 is optional, but if specified, must be present for both the left and right operands, and must be equal for True. Else, False.Num3 is optional, but can only be specified if Num2 is also present. Else, False.Num3, if specified, must be present for both the left and right operands, and must be equal for True. Else, False.
[Code]..
I also know that I could cache elements of the checks into booleans and then use those to reduce the amount of text. But that seems like a waste of cycles just for code readability. So I wanted to know if the SO community had better thoughts on reorganizing it, just in case I'm being too verbose with my checks.
I used .NET Framework 1.1 in C/S project before. Now I have updated the project to use .NET Framework 3.5 without modifying source code, but I have found that : the Remoted DateTime values can not be converted to the equivalent local time of a remote computer that is in a different time zone. In .NET Framework 1.1, the DateTime values can be converted automatically.
[Code]...
How do i read through a textfile line by line checking for and removing duplicate values?
View 1 RepliesIs there any better performance by checking for a true value like this:
[CODE]..............
Than like this:
[CODE]..............
I know that AndAlso is equivalent to && and OrElse is equivalent to ||. But what is the cleanest way to achieve the equivalent of Visual Basic's And and Or in C#?For example, consider the following VB.NET code.The ValidateForControl method performs some validation and returns whether the state of the specified control is valid. The entire input form is valid if all controls are valid. However, each control must be individually validated even if one is invalid (which requires the operator not to short-circuit). Visual Basic's And operator is perfect for this situation, but unfortunately there's no equivalent operator in C# as far as I know (&& short-circuits).
[Code]...
I am Validating a TextBox on it's KeyPress Event in VB.
VB.Net
If InStr("0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz`~!@#$%^&*()_+|[]{};:<>/?,.'" & """" & Chr(8), Chr(KeyAscii)) = 0 Then KeyAscii = 0
What will be it's equivalent in C# ?
Let me know how can i use this Err in c#.This is VB Code:
If Len(sPart1) <> PART1_LENGTH Then
Err.Raise(vbObjectError, , "Part 1 must be " & PART1_LENGTH)
[code]......
What I am trying to do is to check if a value matches one of two numbers (and easily be able to add to the numbers to compare to). Rather than doing a longer-winded way such as: [Code] I have found that this only works when SectionID is 2 or PageID is 8. If SectionID is 3 or PageID is 12 then it doesn't work. Why is this and what can I do to try to get around the problem?
View 3 Replieswhat is the equivalent for OLE in .net
View 1 RepliesI'm normally at home in C#, and I'm looking at a performance issue in some VB.Net code -- I want to be able to compare something to the default value for a type (kind like C#'s default keyword).
[Code]...
I am relatively new to Visual Basic. When it comes to logging, in Java I use log4j for logging.What is the equivalent in Visual Basic and can you please guide me to a good tutorial?
View 1 Repliesprivate bool txtRegExStringIsValid(string textToValidate)
{
Regex TheRegExpression;
string TheTextToValidate;
[code]....
I've got a large codebase which I'd like to expose to plugin authors to allow them to use VB.Net Express to code plugins for a server app, which is not available to them. My problem is that even with obfuscation, I'd rather not distribute the complete app and/or dlls, as even with obfuscation peeling apart a .NET assembly and puzzling out code is relatively easy to do. I'm interested in this because the licensor I obtain the code from requires me to protect IP and assets and while distributing .NET apps opens up the app to disassembly, keeping the server app private and allowing users to utilize a skeleton dll to code against is a happy medium.
What I'm looking for is some way or a utility to go through my server app source code and create a codeless version of the app which only contains method and property signatures.The intent is to provide a stub .NET dll for them to add as a reference and code against as if they were directly interacting with the server, without actually providing the server code to them, compiled or not. I can of course do this by hand but there are over 90 classes and hundreds of thousands of lines of code I'd rather not spend a week hand tweaking. Also, this presents a problem whenever new methods or code are added to the project. Finally, two separate projects is an even worse scenario.Because people will post suggestions that have little or nothing to do with the question, here's a short, clear example. I want to turn this class:
Public Class MyServer
Public ReadOnly Property Name() As String
Get
Return "Whatever"
[code].....
What is the vb.net expression of this c# expression ?
Frame.GetController<ShowNavigationItemController>().CustomShowNavigationItem += new EventHandler<CustomShowNavigationItemEventArgs>(WindowController1_CustomShowNavigationItem);