How do I code the total cost to give me a pound sign with the total cost at the moment when the total comes up for an example it gives me 3.6 when I need it to show £3.60 here is the code I have so far. [code]
View 2 Replies
I have a assignment and I have got to do the total cost and put the total in a label, here is the code. Select Case pizza1
[Code]...
I'm have successfully did a shortcut "+" and "-" button to increase and decrease the qty ordered. But by doing so, i now have problem tabulating the cost for each item. Below is the print screen for my application. You will realised that the Lamb tandoori which is going for $3 cost only $21 after increasing the quantity ordered using the "+" button.In addition, i have created different list boxes for different food categories.Each category's food items is selling at the same price.
<img src "http://img521.imageshack.us/img521/6144/prob.png" />
When i run the program and click the cost button, it only returns a value of £0.00 for insurance cost and total cost.
Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCost.Click
Dim Cost As Double
[Code]......
I have a class assignment where i have to calculate the total cost of a parking garage from hours but i have to do it with a method function. So this might be a stupid question but can you read the user input values from a textbox in the function itself or do they have to be read in and recalled from the Private Sub Button1_Click section?
View 8 RepliesCreate an application that calculates the total cost of a stay in a hotel in the North Carolina mountains. The application should accept the following in terms of input:Month of Check in Length of Stay (in Nights) Number of Persons Room Service Charges Phone Charges Other Charges If the check in occurs in November-March the rate is $89/night. April-August is $99/night and September-October is $109/night. $10/night should be added if more than 2 people are in the room. More than 4 people are not allowed in the room, and a traveler can only request 1 room. A 15% tax should be added to the room rate and 10% tax added to all room service and other charges. No tax will be added for phone charges.
The program should use a function to calculate the total charges for the visitor's stay and output it to a label. There should be buttons or menus to calculate the total, clear the form, and exit the application.At least one of the button should call a sub procedure which performs its function. I don't understand how to set this program up and I'm not sure what it means.
How to update the total cost after every item is selected and the user clicks enter...
Private Sub calcbutton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles calcbutton.Click
Dim amount As Double
Double.TryParse(amounttextbox.Text, amount)
Dim total As Double
[Code] .....
I'm trying to calculate the total cost for gas for a Chevy and a Buick on a form. The total miles is 21 for city and 33 for freeway. I'm also putting in the mpg for each, for city and freeway. How would I set up the labels to display the right amount? Do I use If Then statements?
View 9 RepliesI have a class project that I have been working on for a while, and I can't figure out how to add each cost from lstCosts together to show a total cost of the selected workshops in lblTotalCost. Using the current loop that I have, it only adds the last cost in lstCosts. Is there a way to add the indexes together?
Code:
Public Class Form1
' The registration fee for each workshop
Const intSTRESS As Integer = 595 ' handling stress
Const intMANAGEMENT As Integer = 695 ' time management
Const intSKILLS As Integer = 995 ' supervision skills
[Code] .....
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
Create an application that calculates the total cost of a stay in a hotel If the check in occurs in November-March the rate is $89/night. April-August is $99/night and September-October is $109/night. $10/night should be added if more than 2 people are in the room. More than 4 people are not allowed in the room, and a traveler can only request 1 room. A 15% tax should be added to the room rate and 10% tax added to all room service and other charges. No tax will be added for phone charges.
The program should use a function to calculate the total charges for the visitor's stay and output it to a label. There should be buttons or menus to calculate the total, clear the form, and exit the application. At least one of the button should call a sub procedure which performs its function. [Code]
How would i get this to work on a listview to count the total in the header colums called Cost.
This is a code for DataGridView how do i get it to work in listview?.
code
Dim index As Integer = 1 'column index
Dim total As Single = 0.0F
[Code].....
This is my project for class and this is what i have so far but my teacher gave me no credit. What am i doing wrong? i tried rearranging it but no success.
A fast-food vendor sells pizza slices at $1.25 each, fries at $1.00, and soft drinks at $0.75. Write a program to computer a customers bill. The program should use 4 subprocedures that do the following:
1. read in the amount of each item ordered
2. calculate the total cost
3. display an itemized bill
4. read in the users full name from a textbox, and display a sentence, addressing the user by first name only and in upper case characters, informing the user of their bill
Here is an example itemized bill:
Item Quantity Price
Pizza slices 3 $1.25
Fries 4 $1
Soft drinks 5 $0.75
Total $11.50
Example sentence for point 4: if the user name was entered as John Smith, you would display the sentence JOHN, your bill is $11.50.
MY
Public Class Form1
Sub pizza(ByVal pizzap As Double, ByVal pizzanum As Double)
lstoutput.Items.Add("Pizza Slices" & pizzap & "and" & pizzanum & "is" & (pizzap * pizzanum) & ".")
[CODE]....
The pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 RepliesI have 3 columns in a unbound datagridview, "length" "height" and "Total". Total = length x width and the final total in TextBox outside of the Grid. I found question simalar in this forum and tried the code but i am getting errors.The following is the code i am using
Public
Class Form1
Dim UnboundColumn[code]...
I am running into trouble with some code I am doing for an assignment. The section within the apostrophes (If Then Else) is the section that I am having trouble with. When the user selects a seat type and then clicks the compute button, the wrong cost is displayed instead of an accurate cost.
Option Strict On
Public Class frmTickets
Private Sub btnComputeCost_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnComputeCost.Click
Dim intNumberOfTickets As Integer
[CODE]....................
I'm new to forums as well as new to VB 2008. I'm in process of making a order calculator which will total any values you selected in combo boxes/checkboxes and then display it in a selected area. There are 3 things that I want to achieve: 1. Be able to add another total to an existing total (currently I'm able to see only one total when I hit "Calculate" button)2. Display how many orders I have made so far (new total counts as one order)3. Be able to add up checkboxes selected to an overall total. (when I try to add up one checkbox with another it seems to be stuck on 1.5 pounds which I assigned for each "side order")
View 4 Repliesthis up but this line below seem to be the problem this sentence (Textbox1.Checked) its supposed to add all the numbers up and give total in a input box under the score line is the complete code sorry for wrecking anyones head cause mine is demented
from mark
Protected Sub TextBox1_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles yourtotal.TextChanged
[code]....
This is what I have, but its not working for the total at the end..the IF bit at the subtotal...
Description
Qty
Unit Price
Total
FORMTEXT
[CODE]...
show me the vb code to count total of row in my sql?
View 1 RepliesI would like to pass a value and add to it with the previous value thats what I want.The below code doesn't work...I can't understand the problem..Actually its for rdlc - total purpose I need it.My Code
public MyValue as Decimal=0
public Function AddToSum(ByVal quantity as Decimal) as Decimal
MyValue=AddToSum+quantity
AddToSum=MyValue
return AddToSum
[Code]...
i wrote an application in VB.NET and since i charge by the line, i would like to calculate how many lines i wrote. i have about 100 different vb files with my code. how do i count all the lines?
View 8 RepliesI am developing a small application with VB 2008 and MS SQL 2005. For reporting using RDLC reports. Everything is going well except page wise total.I need page wise total on each page and each(all) page wise total should be displayed on last page. I need the report output like this.
SrNo. Amount
1. 200
2. 200
3. 200
[code]....
Note : No. of rows/page are not fixed.For group Total I have used Sum function of rdlc table with scope table_Group2 & for Grand total I have used Sum function of rdlc in table footer with dataset scope.For page wise total I have used textbox in Report footer (=Sum(ReportItems!amt.Value). How to get page wise totals on last page again.
For our programming assignment to end the module (which im really struggling with) we have to write some code for use in a fictional taxi firm that charges �2 for the first mile, one price for miles 2-10, and another for all miles thereafter.
View 11 RepliesI'm brand new to Visual basic (yesterday) and I know this is likely to be a very basic thing I am asking about which only adds to the frustration i've been feeling the past half hour or so of searching online lol, so bear with me.[code]...
View 8 RepliesI have a DataGridView1 on my form that shows results after filtering from various events and has Quantity as one of it's column. Now i want to show the sum of displayed Quantilty cell in TextBox1 everytime the DGV is filtered.
View 6 Repliesi have records like this in my table. [code] i want to take print like the below eg using crystal report. (sum all the salary and display in single row).
View 1 RepliesI was wondering if someone could translate this code into a more understandable code. It is suppose to be a function that accepts an item name its cost and its quantity. and adds one more array element to ."items" variable and assigns the given name and cost and quantity.
Public Sub AddItem(ByVal strName As String, ByVal dblCost As Double, ByVal intQuantity As Integer)
Me.items=DirectCast(Utils.CopyArray(DirectCast(Me.items,Array),New Purchase(me.itemsCount + 1)-1){}),Purchase())
End Sub
This is the translation i made but i don't think it is correct.
Public Sub AddItem(ByVal strName As String, ByVal dblPrice As Double, ByVal intQuan As Integer)
Dim items As Purchase() = Me.items
Dim itemCount As Integer = Me.itemsCount
For itemCount = 0 To items.Length - 1
[CODE]...
I've made a program for a small business that keeps track of what items there are, their prices, and the quantities of those items. I would like to add a button that goes along the lines of "Add to sale" or "Add to cart", and have it select the currently highlighted item in the database grid view to add the price column up, to make a total for a sale.
[Code]...
