RDLC Report Page Wise Total And All Page Wise Total On Last Page?
Feb 3, 2012
I am developing a small application with VB 2008 and MS SQL 2005. For reporting using RDLC reports. Everything is going well except page wise total.I need page wise total on each page and each(all) page wise total should be displayed on last page. I need the report output like this.
SrNo. Amount
1. 200
2. 200
3. 200
[code]....
Note : No. of rows/page are not fixed.For group Total I have used Sum function of rdlc table with scope table_Group2 & for Grand total I have used Sum function of rdlc in table footer with dataset scope.For page wise total I have used textbox in Report footer (=Sum(ReportItems!amt.Value). How to get page wise totals on last page again.
I can print the current page number with the use of a static variable. How do I find out the total number of pages? Is there any particular variable in which this number is saved and can be replaced automatically later on just before printing commences by some internal procedure?
I have an rdlc report that always produces the last page in blank. In this page, the header and the footer are printed but no data is shown (all data finishes in the previous page). I already checked and re-checked the horizontal and vertical printable areas and all the report definitions fit into these areas (if not, a blank page will be produced in between each page, I guess). If the report has one page, two pages are printed, if there are ten pages with data, eleven pages are printed
I am using vs2005 for developing one project..i have to find Total amount for each page report ( using crystal report and report viewer ..and the report have AMOUNT coloum to display amount) programically..
I wrote a page Page method in my aspx page. in web service method I need to call FindControl method return textbox and get text box value. But my findControl will take MasterPage object to iterate.
see my code
<script type = "text/javascript"> function ShowCurrentDateTime() { $.ajax({
[Code]....
How to pass Master Page object or Page to Page method?. So I can use in Sared method.
Is there any way I can access Textbox value directly in Page method? I need access couple of controls in Page Method.
HOW TO RUN THE JAVASCRIPT FUNCTION ON PAGE ONLOAD EVENT IN CONTENT PAGE OF MASTER PAGE.? means i have masterpage and the content page of master page namely default.aspx in vb.net.i wanna run javascript function in Default.aspx and i have called the function body onload in master page.when i run my website it shows the error "" Microsoft JScript Runtime Error : Object Expected ""
I have a master page which contains everything that inherits it within a form. A page inheriting from it needs to run some javascript to act on a text field on a page. However, I can't seem to reference that text field through the javascript, since the form begins on the master page. The following line will come up bogus: document.form1.txtFindUser.value = blah.responseText; This is because form1 is defined on the master page, while txtFindUser is on the current page.
i am new to this. i have 4 pages. login.aspx, account.aspx, settings.aspx and fliers.aspx. its all programmed in vb.net with sql server backend.on my firstr page, login.aspx i have this code in the .vb page -
Dim SQL As String = "SELECT * FROM table1 WHERE email='" + Me.txtUserName.Text + "' AND password='" + Me.txtPassword.Text + "' " ExecuteNonQuery(SQL)
Does anyone know why a Page_Load would be called twice on a page when requesting an aspx page?I am using .Net 2.0 with the new .net 1.1 compilation model installed. Whenever I request a page, the Page_Load on the aspx page appears to be called twice, so does the Page_Load on and user controls added to that page.
The thing is i have a Master page and a Content Page. I have a LoadComplete in Content Page and a PreRender in Master Page. The problem is one of my htmlcontrols on content page i change on the LoadComplete event server side of the content page. I also have some code for disabling controls on the Master Page PreRender event. For some reason all controls on the aspx side go through the Master Page prerender except the ones that i change on the LoadComplete side. How can i make sure the entire content page loads and then the Master Page PreRender event is called, making all the controls go through that event.
I had a rdlc that contain page footer. The page footer will show in each page. May I know if there is multiple pages, how can the page footer only show at last page instead of every page?
I have an aspx page with three web controls: one to control the List Users page, one to control the Edit Users page, and one to control the Add User page. I have discovered a method for accessing these elements, but it seems to be limited. Here is what I have done:
Protected Sub editUser(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs) 'set selected user from gridview.
[Code].....
This works in most cases. However, I am unable to access the "enabled" attribute of these web controls. Why is this, and how might I access that attribute?
I have an asp.net website that is using update panels on the page that i cant get to reload from the server. I have this for the disable page cache on the master page.
When I click the browser back button to go back to the page it says the page has expired. the other pages on my web site work and call the page load, the only solution i found but cant use is to wrp the whole page in an update panel, but i cant do this becuase i have a report viewer on the page that does not work with ajax.
I have a form with a Tab Control that has 18 pages. When I click on a tab it opens the page and select a textbox on that page (txtTextbox1. Select() ). This works for the first 8 pages but not for the remaining 10 pages. Although on these pages I can mouse click on the textbox, enter info, save then click my Add button that clears the textboxes and has the code (txtTextbox1. Select() ). The textbox is selected just fine. The code for all my pages is the same except for the tab name and the control names. The tab key will move the selection to the next textbox in order on all pages and the Enter key is coded to do the same. The first 8 pages have a total of 256 labels, buttons, list boxes, textboxes and checkboxes on them.
i am new to wpf and i try out navigation but i want some help when we navigate to a page other than the main page then its gonna have a back arrow in the top corner visible allowing to go back but i want that it should be hidden
I have master page in ASP.NET. I have added two asp controls to master page i.e. _EmpDROPDOWN and _findBUTTON.I have one content page. FindEmployee.aspx which shows result list of employees (Gridview) based on the selection made in _EmpDROPDOWN when _FindBUTTON is clicked on Master Page.I dont know how to read Master Page button click evenet in Content page.How to read master page button click event (VB.NET syntax) in Content Page?
I am trying to check all the checkboxes on a webform (aspx) page, which is inside a master page,depending on the ID of the checkbox. The checkboxes are created dynamically, so I only know the prefix for finding it. So, I need to find these checkboxes by iterating the controls on the page somehow. It's not working out.
I am trying to integrate iTextSharp into an existing Document Imaging application that allows users to rotate individual pages that may have been scanned in at an incorrect angle (it happens more often than I would have thought).
So i've been working on a page for a project where the person logs into a login page and then can see a list from the database of employees. everything is working except for one problem. If someone puts in a username and password, username= a and password=b, for example it still allows that individual to view the next page and doesn't throw the error that i have enbedded on the login page to say sorry you have the incorrect password/username. The working code that i have so far is below:
How do I continue to print a list onto another page once the bottom of the page is reached?
Dim PrintFont As New Font("Arial", 14) Dim HeadingFont As New Font("Arial", 14, FontStyle.Bold) Dim LineHeightSingle As Single = PrintFont.GetHeight + 2
I have a user control that checks if a certain query string and session value are present then returns a boolean based on that, if it's true I want to set the master page. The page is throwing an Object reference exception when it tries to call the method EditUser1.UserAuthorization(). Why is this happening? I imagine that the method doesn't exist at that point in the stack. Protected Sub Page_PreInit(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.PreInit
I have a parent page and child page, both aspx. All is working, but now I would like to close child page, if user leaves child popup page and goes back to parent page and clicks on something else like page index of Gridview. I CANNOT close popup child page if user goes to another app, or some other location, I only want to close if something on parent page is changed.
I have the PageIndexChange Event set up for other purposes, I would just like to add some functionality, perhaps a script manager to close the child popup page if the Gridview index is changed, java or another way which ever works best.I think I might also need to check if the child page is even open.
I'm trying to retrieve a custom Attribute set on a page's class from inside the MasterPage. Normally to do this I would need to reflect directly on the specific class, but inside the Master page it's always referred to as the Page type (the parent class). How do I determine the specific type of the Page property?
Here's an example of what I'm trying to do: Dim attrs() As Object = Page.GetType().GetCustomAttributes(GetType(MyCustomAttribute), False) For Each attr As MyCustomAttribute In attrs ' Do something ' Next
but it only ever returns the attributes attached to the actual Page class.
I'd rather not have to derive a new base type from Page if I can avoid it.
Here is how my class is defined (in the code-behind):<MyCustom()> _Partial Class PageClass Am I defining this in the wrong place?
My application is intended to crawl a URL page and extract all possible links from the page.It works fine for a certain URL but with another it keeps causing problems. When the root page is accessed it correctly extracts the different directory links. but when it requests the directory links html page it pulls the main root URL again. someone mentioned about redirection but when debugging I see the url variable containing the directory link correctly.
