I am attempting to create a timer that will activate a tick event every 1 second until stopped by an "If" statement. The tick event should then drive a clock measuring time in units of hours, minutes and seconds. The if statements handle the time readout, timer stop and activate another form after a set number of hours have elapsed. I have tried several different methods and while my application is running, it does not add increments to the integers representing the time units, refresh the displayed time units, or perform any of the timer related functions. I assume the cause is that I just don't know as much as I think I do (which isn't much)
Here is the applicable code:
Imports Microsoft.VisualBasic.ApplicationServices
Imports System.IO
Public Class SessionManager
I want to create an array of timer in vb.net. My problem is that how will i raise the tick event for a particular timer, say mytimer(x).tick and inside the tick event there is also a button, say mybutton(x) which changes location every interval. for example:
public class blah dim mybuttons(20) as button dim mytimer(20) as timer private sub form_load(....) handles me.load for x as integer = 0 to 20
[Code]...
i dont know what to do next, all i want is to pass the button mybuttons(x) to mytimer(x) tick event, in which their index number are the same. i want to create one timer per button. how to do that? please help me and post example codes. i've researched the net but i cant understand passing variables, addhandlers, etc. i'm just new to programming object oriented.
I used a timer in my user control now when Timer_Tick event is fired I want to raise an event like Ticked. I created:
public delegate sub myDel() public event myevnt as myDel in Timer.Tick
I used raiseEvent myevnt. I also raised the event from a button click. This event is handled in a windows form where the control is used, My problem is event is firing when the button is clicked but not firing from the timer.tick. Is there any problem from Timer.Tick.
I an trying to modify a queue within the tick event of a timer. Is this even possible? A sample follows:
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick Dim NewQueue As New Queue(Of String) NewQueue.Enqueue("alpha") NewQueue.Enqueue("beta")
[code]....
create a looping display (first "alpha", then "beta", etc.). What's missing? Also, why can I declare the Queue outside of a sub, but I can't fill it there as well (enqueue)?
I'm trying to make my application react the way I want if the internet connection goes down, because the application need a permanent internet connection to work properly. This also includes if the server my program is trying to connect to goes down/stops or something.
What I want is that if a exception occures when trying to connect to the server, i calls a sub wich stops all timers, disables some buttons and comboboxes. At the same time it starts a new timer named "retrytimer". The retrytimer checks every fifth second if the connection is re-established. If it is, it activates all the controls and disables itself.
For some reason, the retrytimer tick-event never occures. I've tried inserted a breakpoint on the first line of the event-sub, but it never hits. If I check the enabled-property of the timer, it is set to "true". Why does this happen?The timer is made in the design window, and it's default enabled-property is set to false.Here is my sub wich deactivates some controls and starts the timer:
vb.net Private Sub connectionLost(ByRef errnr As Integer) connected = False If starttimer.Enabled Then starttimer.Enabled = False If resulttimer.Enabled Then resulttimer.Enabled = False If radioposttimer.Enabled Then radioposttimer.Enabled = False If runningtimer.Enabled Then runningtimer.Enabled = False
[Code]...
But here is the funny part! If I start the application without a internet connection, everything works the way I want. But if I disable the internet connection in the middle of my program, it acts as described. The lasts messagebox in my connectionLost-sub are shown, and the timer is set to enabled = true.
Does anyone have a clue? EDIT: I think I've narrowed down the problem quite a bit.It seems like the timer won't work correctly if the connectionLost-sub is called from within a BackgroundWorker. If it is called from something else than inside a BackgroundWorker, it seems to work the way I want.
it is possible to force the timer to do the code within the tick event before the delay.In other words..Usually the timer when starts it delays 'x' seconds according to the interval settings then process some codes then delay again 'x' seconds.What I want here is to do the code then delays 'x' seconds.
I have a quick question regarding the serial port and timer tick event. Basically i have a micro processor connected to the PC via the serial port. With a baurd rate of 38400 set.When the PC sends the micro ":K + VBCRLF" the micro response with a string of information (ASCII encoded) and delimited with a "," and at the end of the transmission a cartridge return line feed is added.Example of sent string:
"12,1134,123,545,76,6868,34,232,1,2,3,6,7,8" These numbers are then split using the VB mystring.split(",") function into an array of strings, then the numbers are converted using ctype. After which my UI is then updated.I have Witten the code in a tick timer event using a timer count of 300ms. Although the program runs and the UI is updated i end it with lots of exception errors. I think allot of this is down to the serial port either timing out or not reading complete string.Or possibly the timer has not executed all the code before another tick event happens Even after adding a few try catch statements i am still having problems. Can anybody suggest a better way of doing it?I was thinking of using a do while loop and at the end a sleep function instead of the timer tick event.I need the speed as i am trying to read and display live data.
I am using VB.NET for Windows applications. What is the difference between Load event,Activate event and Enter event in the Form and in which order the above event is executed.
Suppose I have meeting 31/1/2011 9.30 and when current time becomes 31/1/2011 9.30 it displays a message: "You have a meeting". How can I do this with VB.NET?
I am creating a game.With each timer tick a new picture box is generated and displayed. This works.[code]Now with a different timer I would like to move each of these generated picture boxes down 5 pixels with each timer tick.I cannot access the pctAlien variable outside of the statement it is declared.Is this the best way of generating the pictureboxes?
I have a timer that on tick checks to see the value of a an element in an array using a counter on another form as well. The picture boxes are initially set to false for visible and they should become true when the timer ticks and the element is equal to 1. I know that the pictureboxes have a valid picture in them because if I initialize them as TRUE first, it shows up properly. I also know that I am entering the IF statement because I can put a simple MsgBox with any string in the IF statement and it will display when the requirements are set. But yet the pictureboxes still do not change.
Public Sub test_timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles test_timer1.Tick If tron.left_arm_full(tron.left_all_on_counter) = 1 Then
I am running an application to control at 1, 10 and 100 Hz to compare their response for a control systems class. I have a timer that reads data from hardware, a timer that updates the screen and does the control, and a timer that writes data to a file. I've been having problems with the speed of the write timer, so I created a buffer.It takes 0 ms to load the buffer, and the buffer is written to file using a synchronized streamwriter and a thread every 100 iterations. It also flips back and forth between two buffers so there are no read/write conflicts.If I try to run at 10 Hz, the timer executes on average every 109 ms. If I try to run at 100 Hz, the timer executes on average ever 15-16 ms.
I'm writing a metronome program (a.k.a. click track; it's used for keeping you in time in music), and can't for ther life of me figure out how to play a sound byte (a short beep) as the beat.
I know I need to place this code in the Timer Tick event, but I just have no idea how to import/reference etc. the sound.
1.) I would like to cause a Timer.Tick event in code. I know you can use PerformClick to cause a Click event. Is there a way to do the same with a timer?
2.) I have several "TextBoxes" listed as being on a "Form" but they cannot be seen. I have copied and pasted these during the design phase but have renamed the copies since. Is there a way to purge the unseen TextBoxes?
Hint: If you have "Windows 7", at the desktop, press <CTRL><SHIFT> and Rotate the Wheel on the Mouse. This will re-size the Icons on the desktop. "THIS ALSO WORKS IN THE VB2010 IDE" and allows you to Zoom the code window.
I am using timer.tick in my function, which reads data from a hardware at a interval given in tick. It is accepting the minimum interval of 1ms. Is there any way to run the tick in the interval of microseconds.
I'm using a Threading.DispatcherTimer and every tick of the timer runs a subroutine. Is it possible that if the subroutine takes longer then 1s for the processor to finish that it will mess up the time of the timer that is counting in seconds?
I have an app that basically monitors states, then when a state has changed, a notify form is triggered to show for the user.Timers are used on the form to showing a fading in/out of the form (somewhat like MS Outlook new email notification windows).I'm using a delegate from the main form to show the form, but when the first timer in the form is set to start, the timer's tick event is never ran. Everything up to that point in code works perfectly though.Is there something I need to do in order for the tick event to fire, like it would without the use of a delegate to show the form?[code]
I have an update panel that has a timer set as the AsyncPostBackTrigger.In this Update Panel I have a repeater and in the repeater I have a few buttons which have on click events.
The on click of these buttons does not appear to fire until the timer has ticked.I have tried debugging and this is what seems to be happening, either way it takes ages for the button click to actually fire.
Does anyone know why this would be and what I can do about it?
can any 1 teach me how to use timer in VB.NET. Let's say after i have checked on a check box i would want to activate a button to send out msg automatically.
I'm new with VB and a time program I'm trying to complete is incorporating a tick event. I have the code I need to use, and have the timer placed within the VB Designer but when I start the debugging process, 12:00:00 pops up in the text box. I would like to have it start incrementing after I set the hour, minute and second and initiate the Set Time click event. The code I have for the timer is
I am working on a football simulation. I'm writing the code when a quarter or half ends. If any of you ever played Madden Football you know that when the time reaches zero the play calling screen disappears. This is exactly what I am trying to do. The play calling screen in my case is a dialog controlled by the main game screen (the main form controlling most of the game). I use the .ShowDialog event to display it. What I want to do is close this dialog on a tick event.
I'm not sure how to access this dialog if it was created as a local variable. I assume it's like finding any other control that was dynamically generated at run-time but I can't wrap my head around the proper syntax. Once I get the dialog in the tick event I want the dialog to close and return all control to the main game screen. I've never tried to close a dialog without the user clicking a button on the dialog itself. This is different because the parent control is closing the dialog with its own event (Tick).
I am creating a web browser in VB 2010. I have a search box, and I want to make it so that when I press enter in the text box, it searches. [code] The problem with this is that when I press enter, there is this annoying "beep". I don't know where this comes from. The only thing I can think of doing is making the event activate the search button, but I don't know how to do that either. How can I fix this?
I have a windows application that need to process som quite time consuming jobs. In my first try i did all processing under the form thread. The result was bad response and update of the form due to the heavy jobs.To get around the problem with bad response from the form i created a new class "processing" where i put all the data processing. Then i instanciated a background worker where i in the "doWork" sub created a new instance of "processing".The "processing" class creates a timer from system.timer, and the timer drives the processing.On the Timer event Elapsed the timer starts a new thread from the thread pool.
My problem is now when i want to asynchronously close the background worker (with the corresponding function call what ever it is called ...) there is still a timer thread out there that causes exceptions for me.
1. How can i close my background worker and at the same time have the timer to be stopped?
2. Is there a way to synchronize the timer event so that the timer executes from the background worker thread?
We have a VB 2 VB.Net migration MDI application , we have a messagebox in Deactivate event ,once you click Ok for Message Box ,the focus must be set on to the Child Form which is active.
I am using VB.Net for my Windows application. I will open two child form from MDI. Both forms will open. Now if I will go from form1 to form2 then Activate event for form2 will not fire.
