Transaction (Process ID xx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. at Application1.Form1.UpdateNames(param1, param2 etc.etc.
EDIT: ups, wrong forum ... please move it to vb.net forum. this is desktop application.
We needed an inter-process reader/writer lock.We decided to use a file and lock the first byte using LockEx and UnlockEx. The class creates a file in the system temp folder when it is created. The file is created with readwrite access and share read|write|delete.We also specify DeleteOnClose so we don't leave loads of temp files laying around. Obviously AcquireReader and AcquireWriter call LockEx with appropriate flags and ReleaseLock calls UnlockEx.We have tested this class using a small application that you can run several instances of and it works perfectly. The application that uses it has a problem, which we have managed to re-produce in another small test app. In pseudo code it is
Create InterProcessReaderWriter
Dispose InterProcessReaderWriter without acquiring any locks
Launch a child process which takes a reader lock
The first time this runs, it works fine. If you attempt to run it again, while the child process from the first time is still holding the lock, we get an UnauthorisedAccessException when trying to open the file.This appears to be a permission issue, not a sharing violation but all the processes in this test case are running as the same user.
I have a little problem with my program, Boot Animation Previewer.Firstly, it loads the .zip file and extracts the boot animation in a folder called Temp. If there are existing files in the Temp folder it deletes them. But, once the boot animation is previewed, you can't select another boot animation, until you restart the application, because it gives an error, saying that the program can't delete the images, because the process is using them
View 2 RepliesFirstly, it loads the .zip file and extracts the boot animation in a folder called Temp. If there are existing files in the Temp folder it deletes them. But, once the boot animation is previewed, you can't select another boot animation, until you restart the application, because it gives an error, saying that the program can't delete the images, because the process is using them.
My question is: how to stop using the images? I've tried to dispose the form that loads the .zip file, but with no success.
I am getting the below error when I click a row in the grid. But this error is raised only in exe, which is installed in client machine, but when I check the same from source code in my machine, i am not getting this error. I am able to locate the record.
[Code]...
i'm unable to debug my project that i made. i save it and everything, but it just won't playit says Warning 1 Could not find type 'WindowsApplication1.My.Resources.Resources, Time table'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built. C:SchoolIPTTime table, using 2 loopsTime table, using 2 loopsForm1.Designer.vb 123 0 now when i open it up and try to debug it , it comes up with an error, i even try referencing it but it does nothing ,
View 2 RepliesI have written a windows service that is meant to launch a notepad when a specific action happens. The problem i have is that even though the service launches notepad, the actual notepad it self is NOT visible. I know that it has been launced because i can see the process in the task manager. By the way the process is listed as a SYSTEM process rather than a process under my user name (i believe that is because my process is a "LocalSystem" one).
View 4 Replieserror: the item "objdebugassociateassist.frmdbsetup.resources" was specified more than once in the "resourceS" parameter. duplicate items are not support by the "resources" parameter.
View 1 RepliesI want my vb.net dll to get the data sent from c++ project(exe).Can any body help on in what form this void pointer can be sent via pipe. The void pointer corresponds to enums or structures. I have to get this structures/enums on the vb.net dll end. I have mentioned about using pipe. My question is as what type the pointed to data can be send over the pipe so that I can easily handle the received data at the vb.net dll end.
View 1 Repliesi am trying to write a little program that checks for a process and kills is.here is the
Dim p As Process = Process.GetProcessesByName("Cheat Engine")(0)
p.CloseMainWindow()[code]...
My problem is it�s woking ,yes if the programm ,,Cheat Engine" is running the process is getting killed.But if the program is not running my program crashes.
I don't understand. Till now this little app was working ok. Error1 The item "objReleaseRadni_nalozi.GlavnaForm.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.Radni nalozi What gives?
View 4 RepliesI'm executing a remote process using WMI and would like to redirect the StandardOutput of that process back to my program. I have found these code examples:
[Code]...
I am getting an error with this code.
The process cannot access the file 'C:UsersdavidDesktopTest Folderdavid 2.xml' because it is being used by another process.
how do i end the prosess after I create the file? Or am I creating it in the wrong manner.The underlined line is where the error ocures.
Public Sub AddDTData(ByVal value1 As String, ByVal value2 As String, ByVal filename As String)
dtUser.Rows.Add(value1, value2, Now.Date)
If My.Computer.FileSystem.FileExists(filename) Then
[code]....
How to get full path of current directory of process from where process starts Like if i use my software to start somefile then I want my software to know where she started it from ( files path) What I mean is the file I opend using my softwares location.
View 2 RepliesMy app starts an On-Screen Keyboard process like this:
Dim PID as System.Diagnostics.Process
:
PID = Process.Start("C:WindowsSystem32osk.exe")
:
[CODE]...
It seems to work 90% of the time. However, sometimes the PID.Kill() fails because it says the process already exited. At this point the OSK is always still there on screen. Yes, I know my code should be testing to see if the process is still running before trying to kill it, but given that the OSK is still on screen..
I have a program that starts another program after setting the regkeys basically the program continually syncs the calandar of outlook and another application.I set the regkeys than launch the c:sync.exe app. I have tried a simple process.start and launching the process as a thread and they both do the same thing: The other process starts and works as it should but my main program goes "White screen" or "not responding" until the process.start has exited.
I want the process.start to run in the background so if users click in my main app it responds and truly that they can access the context menu of my main app from the taskbar while the process.start is running.
i want a code that if a process that i picked is no match in a process list that process that i picked will start
View 4 RepliesTrying to create a button that when clicked will check to see if a certain process image is running and if that process is running give the process focus. If the process is not running then start the application.
View 9 RepliesI am working on a small VB application that listens for commands sent from an Android app.
One of the functions is to extract an archive. I am familiar with how to listen for the unrar process to finish, so I can display a progressdialog on the phone while the extraction is happening, and clear it as soon as it's done.
BUT ... if there is an error/alert from WinRAR, WaitForExit() never gets called because WinRAR is still sitting there open until I click "OK" on the MsgBox.
For Example ... if you try to extract a file that is not actually an archive... an alert will pop up saying "No Archives Found", and basically everything is halted on the VB app and the Android app, and the Android app just sits on a progressdialog saying "extracting..." until you manually hit "OK" on the computer.
As you can imagine, this is a problem if the whole point of your app is to NOT have to go over to the computer.
So... I am wondering if there is something similar to WaitForExit() that will wait for an error and allow me to close out the alert and let the process end.
Here's my Sub for the UnRar command:
Private Sub UnRar(ByVal WorkingDirectory As String, ByVal filepath As String)
Dim objRegKey As RegistryKey
objRegKey = Registry.ClassesRoot.OpenSubKey("WinRARShellOpenCommand")
[Code]......
I have an issue using Process.MainWindowTitle,Process.MainWindowHandle on some older VB6 applications. After Process.Start I use Process.MainWindowTitle to display in a listbox. The MainWindowTitle returned is not the Window Title but in fact the Project name of the VB6 exe.? I also store the MainWindowHandle to use the ShowWindow and SetForeGroundWindow API's. It would appear that the ShowWindow API does not work, but the SetForegroundWindow does. ie: if the VB6 app is minimized, showwindow does not restore, if it is NOT minimized setforewgroundwindow sets it to the foreground. The exact same code does work correctly for any other .net exe or notepad, only on these vb6 programs I am having a problem.
View 9 RepliesI try to open a text file and write in some text, when i run the program it says the following error:The process cannot access the file 'D:VB projectsCategory_Characteristics.txt' because it is being used by another process.
THe code is as follows and the error hits in line :
Dim objWriter As New System.IO.StreamWriter(FILE_NAME)
-----------------------------------------
Dim FILE_NAME As String = "D:VB projectsCategory_Characteristics.txt"
[code]....
I was wondering if this code could be better optimized for multithreading. What it does is open a process and loops through the data, there could be any range of files to open (so I would like to have say 2 or 3 processes at once):
[Code]...
I have a procedure (parent process) that starts several processes (child processes). The child processes calculate several array variables. How can I pass those arrays to the parent process? At the moment, the child processes write the arrays to a streambuilder and the parent process reads the stream. Is there a better way to do it? Is it possible to have the child processes write to RAM memory and have the parent process read from there? It is like declaring a global variable in the parent process and give the child processes access to it.
View 4 RepliesHow can i access a file through FileStream which is being used by a window service. Actually i am trying to access a file which is also being used by our window service. I need to read data from this file. I am using below code but also getting following error:
Code:
Dim fs1 As IO.FileStream = New IO.FileStream(psPath, IO.FileMode.Open, IO.FileAccess.Read, IO.FileShare.Read)
Dim sr As IO.StreamReader = New IO.StreamReader(fs1)
sData = sr.ReadToEnd
Error: The process cannot access the file 'FILENAME' because it is being used by another process.
I tried changing FileShare.Read parameter to FileShare.None but it didn't work out. I also read below post which says that it is not possible but i think there is a way to read it like if you open a file through Firefox but still window service is accessing it.
Whats happening is I run the code below and get the following error "The system cannot find the file specified". I've read that with UseShellExecute set to false that you can't use WorkingDirectory.
Dim Password As String = "password"
Dim SecureStringPassword As New System.Security.SecureString
For Each c As Char In Password
[Code].....
I am working with saving and deleting images. What i really want to do is check and see if an image exists in the destination folder and if it does automatically overwrite it. i couldnt figure that out so i figured i would look to see if the file was there if it is Delete it then write the new file..The issue is i keep getting this error.The process cannot access the file "FileName" because it is being used by another process. [code]
View 5 RepliesHow would I go about starting a new process without it being the child of the calling process.
Example:
Main Program (Caller.exe)
process.start("file.exe")
VB.net 2010 Read all around the net, but cannot seem to do this: Tried the performance counter Categoryname=process Instancename=("program"). _Total helps in part- but it would be more efficient to acquire the main applications cpu usage for this project.
Code:for each p as process in process.getprocesses if p.id=process.getcurrentprocess.id then end if next 'Values, Obviously multiple processor cores have to be taken into account'kernelmodetime, usermodetime, Cputime, total cpu time, 100% <-- Does this involve adding and or dividing all these times? I need the current process CPU usage.
The process cannot access the file 'C:UsersJoshuaDocumentsTest1.txt' because it is being used by another process.Now the Problem. When i step through my code, it will do as intended, e.g. clear all contents of test1.txt. when i run it at run time it throws this error. The reason for it throwing an error is the text file is reading string, int, string, and the txt file has a string including in the int part, so i'm making it so you can empty a corrupt file.
vb
Imports System.IO
Public Class Form1
Private norepeat As Boolean
[code]....
i use System.Diagnostics.Process.Start to run a process
example :
Dim p As New System.Diagnostics.Process
p = System.Diagnostics.Process.Start("D:ProjectApplication.exe")
it works perfectly during run time. but after i deploy to server.... this code did nothing, it did not call out this process
