I am changing the content menu strip of the control to my menu strip but nothing happens.I can see my menu strip in the rest of the form but dhtml edit control does not react to right click.
View 2 Repliesq1/ how can i add a menuitem to ie edit control context menu? is it a registry setting? q2/ after i've added a menuitem to ie edit control context menus, how can i programmatically edit the text in that edit control when i click my menuitem?
View 3 RepliesI have an INI file that contains several of these following entries.The Section names are all labled ASSET_CONTROLS_#.[code]The "Name" field should be added to the ContextMenuStrip control as a ToolStripMenuItem.If there is a value in "SubMenuNames" in the INI file, the ToolStripMenuItem created from the "Name" field, should have a DropDownItem created under it. I have separated multiple SubMenuNames with a SemiColon, so a loop would be used to create the separate menu items.Command and Parameters are to be used with the Process.Start function when the Menu Item is clicked. What is the best way to code this? I have been trying to do the event handling for the menu items for hours now and can't get it right. I basically want to call a procedure and pass the "Command & Parameter" values to it to use the Process.Start function.[code]
View 11 RepliesWhile developing -> I can add a submenu to items in the context menu strip. When I build the application, and show this context menu strip - there is no option to get into this sub menu.
View 13 RepliesI was wondering if it is possible to disable certian buttons on a context menu strip?
Say i have a start button, and then i click it i want it to disable a button in the context menu strip
P.S, the ContextMenuStrip is being used with a Notify Icon
I have a ContextMenuStrip and a ListBox. I have the context menu connected to the listbox. The menu has two items, Select All and Deselect All. I want to select/deselect all the items in the listbox when a button is clicked. I have done this before for a CheckedListBox but cannot remember how.
View 7 RepliesI'm trying to figure out a way to put a text label at the top of a context menu strip. But as far as I can tell, the only options are "MenuItem", "ComboBox", "Separator", and "TextBox".I reckon I could use a MenuItem for this if I had to, but I think a (non-clickable) label would look a lot more professional.
View 7 RepliesWell the context menu strip is the box that appears when we right click during run time if i'm not mistaken. I was trying to make it run but during runtime when i right-clicked in the form nothing happens. I'd like to know if there's a way to make the program run.
View 1 RepliesI have a problem with Context Menu Strip Opening event, and i think i can get help here. On ContextMenuStrip1_Opening i have code to check, does any item are selected on listview. If yes, then ToolStripMenuItem2.Visible = True else ToolStripMenuItem2.Visible = False but it anyways using Visible = False and i can't get know why. My code on opening is this:
[Code]...
I'am trying to find my context menu strip in my form but my code doesnt seem to displayed my desired output...here is my code:
[Code]...
How to open a link with the right mouse button in the webbrowser
We use the ContextMenu ?
I have a webbrowser control that has the contextmenustrip control in it. I would like to right-click on an image and have the contextmenustrip tool copy the image url to the clipboard. I have code that is able to copy text from the webbrowser control to the clipboard and paste, but I would like to be able to copy the image url to the clipboard so that it can then be pasted wherever.Here is the code that I have that is able to copy text and past it:
WebBrowser1.Document.ExecCommand("copy", False, vbNull)
TextBox1.Paste()
The code that I have provided above doesn't copy image urls to the clipboard.
The following code is converted from C# to VB.NET (this works fine in C#), however, after converting to VB.NET, the ItemClicked Event doesn't work as expected.
[Code]...
I have a context menu strip that is built using code, how can I add an event to an item in the menu?
vb.net
Private Sub ctxtResources_Opening(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles ctxtResources.Opening
[Code]...
i want to change the context menu strip of the tabbed web browser but i cant..is any way?? also, how to put "Open in New Tab" in the cmu?I
View 4 RepliesHow can I assign a context menu strip to a listbox item and not the listbox itself?
View 1 RepliesBackground Story: My program contains a form and 3 buttons (Add New, Delete, Edit...etc), and it works perfectly. Recently, I decided to add menuStrip, since it helps end-user to work faster. So, I put the menu strip coding.
However.....Sometimes, it works normally. But sometimes it works very strange.
Strange 1. When I chose the "Add New" item in the menu, the Add New Form will be showing up, and then I clicked on the Cancel button in the Add New Form. The Form kept showing up repeatedly. But sometimes, it works normally. (Note: Add New Form's Cancel button contains one line simply coding, it's "me.close")
Strange 2. When I chose "Delete" item in the menu, the MsgBox showing up (since I coded it and it's a warning message to end-users), but the MenuStrip KEPT showing up, so the MenuStrip overlapping the MsgBox. (I expected the MenuStrip disappear in this situation)
Is some codings I have done incorrectly?
Here below is the coding:
CODE:
Visual Studio 2005. Is there a way to determine which menu item is hi-lited in a ContextMenuStrip?
For example: I associate ContextMenuStrip1 with TextBox1.ContextMenuStrip1 contains 5 items with names:
Item1ToolStripMenuItem
Item2ToolStripMenuItem
Item3ToolStripMenuItem
Item4ToolStripMenuItem
Item5ToolStripMenuItem
A sub-menu is created with Item3ToolStripMenuItem that contains 5 items with names:
Item3aToolStripMenuItem
Item3bToolStripMenuItem
Item3cToolStripMenuItem
Item3dToolStripMenuItem
Item3eToolStripMenuItem
As the menu is navigated is there a way for the program to know which of the 10 menu items is hi-lited before a click event occurs?
How to show a context menu strip at caret postion (not cursor or pointer postion)Example: If the control is in a text area at 10th line 5th word then context menu strip should display there at caret postion.I am looking for kind of auto prompt that we use to get near caret when we click "Ctrl+Space" in any IDE like Eclipse, VB 2010, VS etc
View 2 RepliesI've done this many time before, but for some reason I can't get it to work this time.I'm trying to get a ContextMenuStrip associated with a DataGridView. I've defined each to the form and in the properties of the DataGridView I've set the ContextMenuStrip property equal to my ContextMenuStrip name (cmsDictionary), defined the onClick event code, but when I run nothing happens.
The program was originally code with a dynamically added context menu but it was popping up all over the place and I wanted to remove that and just let the grid manage it.
I have created a menustrip in vb.net windows application.I typed items like &File,&Open.At design time,F and O is undelined in File and Open respectively.But at runtime,it does not seem to be.Also,while creating context menu strip,iam not able to enter more items like cut copy paste.
View 3 RepliesI'm trying to change the context menu when I right click in a WebBrowser control.
I have a working tabbed browser, but the "Open in new tab" is disabled.How do I enable it and attach it to my code?Is it also possible to add/remove features?
I want to use this function in my program
EnableMenuItem Function - [URL}
how to use it, i am trying to edit right click explorer context menu
I am looking for a code that can help me Disable Refresh Entry from Right Click Context Menu.One more thing is with refresh Menu entry I want to make a search in Context menu and if there is an entry name = abc than I want to disable it too. So any idea how to proceed.So far I have gathered this information that this command can help me, but as am a newbee in .NET.[code]
View 10 RepliesI am migrating code from vb6 to vb.net (using vs2005 as my ide) I have added a resource that is a .chm file that contains help information (that i have not written) and what i want to do is open the file to a "page" on the click event of a menustrip tool item.
How can i use the click event of the menu strip item to open an explorer window that displays help like pressing F1 in visual studio 2005 on the term INTEGER and getting the help page on the visual studio help bit to do with integers
I have a flowlayoutpanel populated with custom thumbnail controls. I have code set to display a context menu on the thumbnail controls and the panel. Once a page is displayed, I have to right click on a control twice before the menu will be displayed. I have debugged and followed code execution all the way down the line. There seems to be no difference in code execution on the first click which does not display a context menu, and the second click which does. After a context menu is displayed, everything is normal. All thumbnails will display context menus as they should. But...not the panel....I have to do the same to the panel, then it is fine.
View 5 RepliesMy program goes like this, i have a log in form where in the admin and guest can access, then the form will navigate to main menu form, i have there menu strip, pls help. how can i disable the subitems in the menu strip if the user is 'guest' for security purposes..
View 1 RepliesI am totally new to VB and I'd like to know, for example, when a user clicks on "Print" in the menu strip on the keyboard should automatically press "Ctrl+P", because the original print dialog, and the WebBorwser print dialog is toootaly different.
View 11 RepliesI need some code to add the contextmeu to the richbox Not the tabcontrol But the richtextbox is in the control, So I have the CType(TabControl1.SelectedTab.Controls.Item(0),RichTextBox) But now what to add the context menu?
View 6 RepliesVB express 2008 .net 3.5 or .net 4.0 VB express 2010?I have written application to convert RTF to HTML. The main Purpose of the application is to copy VS code to the clipboard and covert it then put it back into the clipboard as a HTML Document so that it can be pasted into a HTML document such as Windows Live Mail. I found that code copied and pasted is spaced out in in the wrong positions.
The applications works perfect with no bugs so far. I then asked Myself how to go about doing the copy with the least amount of operator interaction. So I added an Icon to the Icon Tray with a right click menu to use to convert once the Rich Text Format was copied to the clipboard. This works fine except you have Five steps, Select the text, Copy to clipboard, Right Click the icon, Select the Converter and Paste. The normal is three steps.
To this the best solution is to add a context menu item to the active form such as the RTF editor or window. So that when you select the Rich Text to copy and right click on the form to bring up that menu then to Just Select the menu Item such as "Copy RT and Convert" I searched and found about 544000 Items and tried to restrict down to no avail. I read until I finally gave up. I did not find any code examples of this. Almost every thing I found related to the web or some other explicit document like Excel and not to the Various windows that could be active with RT in it.
how do you add a context menu item to the context menu of an active rich text format window such as WordPad or VB?I have test in my application that tests to see if it is a RTF in the clipboard so if it is not the converter does nothing.
Imports System.Threading
Imports System.IO
Imports System
[code]....