Don't Want Any Access To Superclasses Class Variable
Sep 10, 2009
i have an abstract super class and a sublcass.I don't want any access to the superclasses class variable.Access should only be through the subclass method [code] ' now i just want the GetFoo method exposed however all i get is ' direct access to the Foo string.' I made it Friend so that only the derived class SubClass can see it ' but my main program can see it as well//How can i set this up so that the only call availabe would be
x.GetFoo()What have i got wrong ?
Is it possible to set a variable in my custom class for Private Read/Write access and Public Readonly access without creating Properties with Get and Set? In other words, from within my class I want full access and from my form I only want read access. Right now I declare my variable as either Private or Public to control Public read/write access. I tried googling my question a bit but I'm not sure what the correct terms even ar
how to access the variable from another [Code] I need to call the variable invoiceno in the class xmlserializer using ord1 and assign the value which the user enters during the runtime.
Public Class objLocation Public SysLocationId As String Public NameFull As String Public LatRaw As String Public LongRaw As String Public Active As Integer End Class dim lLocation as new objLocation
I can access each variable thus lLocation.SysLocationId, etc. Is there an alternate way, so I can access each variable by index, so something like lLocation(0), lLocation(1), etc., which gives me the flexibility to compare to classes of the same type via a for next loop, or against other sources, like a datatable.
Trying to understand the best way to do this and I'm can't get it figured. Here's basically what I have:
Public Class CardParsingClass Private iAcctIDStart as integer Private iAcctIDLength as integer
[code]....
I've only included 2 of the class level fields here but there are actually 30, so that's why I was hoping to be able to send the name of the field to set and the value to set it at in the SetValue function. So in some other routine in the program I'd like to be able to issue the following call:
SetValue("iAcctIDStart", "3")
But then when I get into the SetValue routine, I'm not sure how to proceed. I thought about a case statement that would basically be this:
select Case strFieldToSet case "iAcctIDStart" iAcctIDStart = cint(strValue)
Inside my .aspx I have some JSON code that looks like this:
[Code]....
Basically what I'm doing is pulling text from two labels on one page, and sending them to another page by calling the "doIt" function which looks like this:
[Code]....
Just so I'm clear, the "doIt" function and the JSON call are on two separate web forms. My problem is that with the "doIt" function being Shared, I can't access any global variables of the class. And if I remove the Shared, my JSON doesn't execute.
I've got a console app with a sub main then i have a seperate class inside the module..i can't seem to update the public global variable from inside the class as i can't declare the variable as shared...
Create a class named Service. Inside the Service class, declare a class variable named Started. The datatype of this variable is Boolean.Public Class Service Dim started as Boolean End Class Create a class named Server. Inside the Server class, declare a dynamic array that can contain elements of the type Service.(Note: For convenience, both the array and the variable Started can be accessible from a client program that creates an instance of Server and Service respectively)
Create a constructor for the Service class. When the constructor is executed, it will set the value of the class variable Started to True. Create two new classes: WebServer and DatabaseEngine. Both of these classes inherit from the class Service. Inside the Service class, declare a Sub procedure (method) named Terminate. This method should display the following text Service stopping in a message box when executed.This method can be overridden in classes that inherit from Service class.
Inside both the WebServer and DatabaseEngine class, override the method Terminate inherited from their base class Service. Both methods should first call the base class Terminate method. The messages Web server stopping and Database engine stopping should also be displayed in a message box when the Terminate method for the WebServer and DatabaseEngine are called respectively. These messages should only be displayed if the Started variable inherited from their base class is not equal to False.
Inside the Server class, declare a method named Shutdown. This method does not return any value. When executed, it will call the Terminate method for each of the Service instances (if any) in the arrServices array. You should call the Terminate method within a For Each loop that loops through the elements of the arrServices array.
In the Sub Main method, create an instance of the class Server. Set the size of the arrServices array in your Server instance to contain 2 elements. Create first a WebServer instance and then a DatabaseEngine instance into this array. Call the Shutdown method from your Server instance.
I want to created a nested class that can only be visible to and instantiated from the parent class.But I also want to be able to use an instance of the nested class through a public variable of the parent class.I tried making the nested class private, or making the nested class' constructor private, but it won't compile.Is it possible to do this in .NET?
I have procedure (Import) that calls a for a new instance of frmImportData. I also have a class name clsBatch that has a data table property called prpParametersTable.For some reason, I get an error (indicated below with ERROR>>>) when trying to assign prpParameterTable to cv_dtImport2. The error states "Object reference not set to an instance of an object.". Why does this error not happen when I assign dtBP to cv_dtImport1? Both cv_dtImport1 and cv_dtImport2 are equal to Nothing and in my Import procedure dtBP = prpParametersTable.
Public Sub Import(ByVal clsB As clsBatch) Try Me.cv_clsB = clsB
I have three class files, accounts.vb and transactions.vb in addition to my form.vb. I am unable to retrieve a member variable from on class from inside the other. When the combobox index changes, the program loads the correct account (checking or saving) from two different sequential files. I don't think I have the calcBalance procedure in the correct class file. And that is what I am having trouble with. Accessing it to display it. [Code]
Class Human End Class and another class which refers to the human class
Class ASD Private somevar as new Human End Class
Ok now i've got a problem, i wish to rename my class Human, to Man. i've got to change Human to Man 2 times, which is OK but the problem is that in the real case, its not just 2 times, its like 500 times or more.
Well its something like a PHP on Javascript.
the following shows the solution of what i'm trying to do, but its in another language PHP/Javascript:
note: in php $ sign declares a variable, echo writes the variable out
The code below works for the class that I hard coded "XCCustomers" in my RetrieveIDandName method where I use CType. However, I would like to be able to pass in various classes and property names to get the integer and string LIST returned. For example, in my code below, I would like to also pass in "XCEmployees" to my RetrieveIDandName method. I feel so close... I was hoping someone knew how to use CType where I can pass in the class name as a string variable.
Note, all the other examples I have seen and tried fail because we are using Option Strict On which disallows late binding. That is why I need to use CType.I also studied the "Activator.CreateInstance" code examples to try to get the class reference instance by string name but I was unable to get CType to work with that.When I use obj.GetType.Name or obj.GetType.FullName in place of the "XCCustomers" in CType(obj, XCCustomers)(i)I get the error "Type 'obj.GetType.Name' is not defined" or "Type 'obj.GetType.FullName' is not defined"
I have some classes, BsfciFile and StudyFlashCard. Bsfci is the extension to which I save my set of flashcards in an INI format. I am currently working to transform my code from using Windows API calls to access the INI to using a IniFile class that I found on the internet. I would like the BsfciFile to have a Array of StudyFlashCard objects, but I would like the StudyFlashCard class to use the IniFile class object contained in the BsfciFile class. I can pass the IniFile from the BsfciFile class to the constructor for the StudyFlashCard class, but I want it to modify the same IniFile as the BsfciFile class has later on.
This is a bit of a continuation from a previous post for which AtmaWeapon was very informative.
Problem: A parent class has a sub class with various properties. A property of the parent class is a List(of T) with T = the sub class The issue is how to store data in the sub class of the instantiated parent
Some example code (hopefully formatted correctly):
Code: '=========== Class Definitions ============= Public Class courseClass Public Class timeTableClass
I have a very simple class that is located within my App_Code folder in my VS2008 web application project. I am trying to instantiate an instance of this class from my code-behind file. Intellisense does not seem to be seeing my class and I am not sure why. I am using VB.NET which I am admittedly not that familiar with as compared to C#. Perhaps I am missing something. I would bet it has something to do with something I am missing in VB.NET.Here is my simple class (for testing):
What I am trying to do is very simple now. Pointx and Pointy in Class1 is underlined. How do I get that variable value (which the form1 finds) into class1.
This is my first major application using multiple classes. It is written in vb and I know about creating objects of the class and using that instance to call functions of the class. But how do I create an object with constructors to allow another program written in C# to access my classes and functions and accept things from the program.
I'm getting an error in .net when trying to declare a Public class on my code behind page.
Partial Class _Default Inherits System.Web.UI.Page
Public someVariable as integer Public someClass as className
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load [...]
The error I'm getting is BC30508: 'someClass' cannot expose type 'className' in namespace '<Default>' through class '_Default'.The goal here is accessing the class properties in script blocks on the aspx page like this <%=someClass.classProperty%>
I'm not sure if I'm trying the right methods (I've tried several ways of declaring the public class) or if it can even be done..
how to declare scope for variables outside their class?
Here's what i have in a class known Create_User: Public Class Create_User Public conn As New SqlConnection(My.Settings.HotelConnectionString) Public usercmd As SqlCommand
[Code]....
How can i increase the scope of these variables to be used in another class? I dont want to keep declaring them again and again.
Dim v as integer public sub storeVar(byval s as integer) v = s end sub
[code].....
I need to save a reference of variable s in Class2 in variable v in Class1.(i.e. when the value of s changes v also changes (and vice versa)Is this possible since vb.net doesn't have pointers?Will it work if I change "byval" to "byref"?
