I've got a console app with a sub main then i have a seperate class inside the module..i can't seem to update the public global variable from inside the class as i can't declare the variable as shared...
View 6 RepliesInside my .aspx I have some JSON code that looks like this:
[Code]....
Basically what I'm doing is pulling text from two labels on one page, and sending them to another page by calling the "doIt" function which looks like this:
[Code]....
Just so I'm clear, the "doIt" function and the JSON call are on two separate web forms. My problem is that with the "doIt" function being Shared, I can't access any global variables of the class. And if I remove the Shared, my JSON doesn't execute.
I have the following code:
Option Explicit On
Imports System.DirectoryServices
Imports System.IO
[code].....
I wand to Expose a function inside a module in my Class Liberary( DLL)
module Module1
Public Function Add(val1 , val2) as double
return val1 + val2
End Function
End Module
i could use Global x as string in vb6 in a module to declare it with global privelages, how can i do this in vb2008? how to declare a global variable in vb2008? so that i could use it anywhere i want. i know global variables are not recommended in programming but i need one.
View 4 RepliesIf we declare a global variable in module in vb.net, we can use that variable in anywhere in project.
How can we achieve same thing in C#.
Previously when we tried to convert a vb.net project to C#, we succeeded in removing the syntax error but we can't access global variable in a form.
I need some solution or guidance. Where I am making a mistake?
Create a class named Service. Inside the Service class, declare a class variable named Started. The datatype of this variable is Boolean.Public Class Service Dim started as Boolean End Class Create a class named Server. Inside the Server class, declare a dynamic array that can contain elements of the type Service.(Note: For convenience, both the array and the variable Started can be accessible from a client program that creates an instance of Server and Service respectively)
Create a constructor for the Service class. When the constructor is executed, it will set the value of the class variable Started to True. Create two new classes: WebServer and DatabaseEngine. Both of these classes inherit from the class Service. Inside the Service class, declare a Sub procedure (method) named Terminate. This method should display the following text Service stopping in a message box when executed.This method can be overridden in classes that inherit from Service class.
Inside both the WebServer and DatabaseEngine class, override the method Terminate inherited from their base class Service. Both methods should first call the base class Terminate method. The messages Web server stopping and Database engine stopping should also be displayed in a message box when the Terminate method for the WebServer and DatabaseEngine are called respectively. These messages should only be displayed if the Started variable inherited from their base class is not equal to False.
Inside the Server class, declare a method named Shutdown. This method does not return any value. When executed, it will call the Terminate method for each of the Service instances (if any) in the arrServices
array. You should call the Terminate method within a For Each loop that loops through the elements of the arrServices array.
In the Sub Main method, create an instance of the class Server. Set the size of the arrServices array in
your Server instance to contain 2 elements. Create first a WebServer instance and then a DatabaseEngine
instance into this array. Call the Shutdown method from your Server instance.
I need regarding declarations of global variable.. I created a module here is the script.
[Code]...
and then I set the value of that variable in my Login form and then my PROBLEM is when accessing it on the my Main form and I want to display the data of that variable in a textbox, the variable does'nt hold the value that I already set. I'm waiting for replies!
Get the value of Global variable in javascript [code]...
so want to access "a" in code behind as it's global varible
I tried to access a variable using a module with this code:
Module DataModule
Public x As Integer = form1.trackbar.value
nd Module
Can i write 2 classes for one Script Task editor in SSIS(2008). I tried to access the global variable like below. I created 2 classes and it doesn't show any compile error, but i couldn't access the global variable in class2 which was assigned as 2 in class, ScriptMain.
[Code]...
I have a text file to read, at the first line will have a size of array, that means I cannot guess size of array, and I have to create a array in side a sub (Local Variable). Then, I want to use value of array in another sub, but I cannot use value of variable of another sub. What I have to do to make an array con be used in every sub/function in a class? Also, I've post an example file, code and error list.
[Code]...
How do I access the base class inside a derived class?
View 1 RepliesI'm looking to turn this vb calculator I built into a select case contained within a module. I'm not sure where to start if someone could help.
Public Class form_calc
Dim firstEntry As Double 'Declares the variable for the first entry
Dim secondEntry As Double 'Declare the variable for the second entry
Dim operation_sign As String 'Declares the variable for the math sign
Private Sub form_calc_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
display.Enabled = False
[Code]...
i just got 1 question how do u create a (in excel ) variable table (database) inside a function which could be called for filling and reading through "for to next" loop module
View 2 RepliesI failed at the title: it should be "access a function of a class from a module"Edit by Moderator: I've amended the title for you.I got a huge VBA program which opns an excel workbook.I want that if i press crtl + s excel dont calls his save function but my own written save-function.
The code looks like this:
Code:
Namespace Test
[code]......
Is it possible to set a variable in my custom class for Private Read/Write access and Public Readonly access without creating Properties with Get and Set? In other words, from within my class I want full access and from my form I only want read access. Right now I declare my variable as either Private or Public to control Public read/write access. I tried googling my question a bit but I'm not sure what the correct terms even ar
View 5 RepliesI want to do this: [URL] but in VB. I believe that is for C# I have 2 classes.
[Code]....
I know I've been asking too many questions lately and I do apologise for that. I am trying to learn the basics
how to access the variable from another [Code] I need to call the variable invoiceno in the class xmlserializer using ord1 and assign the value which the user enters during the runtime.
View 6 Repliesi have an abstract super class and a sublcass.I don't want any access to the superclasses class variable.Access should only be through the subclass method [code] ' now i just want the GetFoo method exposed however all i get is ' direct access to the Foo string.' I made it Friend so that only the derived class SubClass can see it ' but my main program can see it as well//How can i set this up so that the only call availabe would be
x.GetFoo()What have i got wrong ?
If I have the following class and declaration:
Public Class objLocation
Public SysLocationId As String
Public NameFull As String
Public LatRaw As String
Public LongRaw As String
Public Active As Integer
End Class
dim lLocation as new objLocation
I can access each variable thus lLocation.SysLocationId, etc. Is there an alternate way, so I can access each variable by index, so something like lLocation(0), lLocation(1), etc., which gives me the flexibility to compare to classes of the same type via a for next loop, or against other sources, like a datatable.
I can access a module from code behind but not from the aspx page in inline VB code <% ... %>.
View 2 RepliesTrying to understand the best way to do this and I'm can't get it figured. Here's basically what I have:
Public Class CardParsingClass
Private iAcctIDStart as integer
Private iAcctIDLength as integer
[code]....
I've only included 2 of the class level fields here but there are actually 30, so that's why I was hoping to be able to send the name of the field to set and the value to set it at in the SetValue function. So in some other routine in the program I'd like to be able to issue the following call:
SetValue("iAcctIDStart", "3")
But then when I get into the SetValue routine, I'm not sure how to proceed. I thought about a case statement that would basically be this:
select Case strFieldToSet
case "iAcctIDStart"
iAcctIDStart = cint(strValue)
[code]....
I have finally got my code all working, but there is just a quick query really. At the moment I have all the database stuff in each form seperatly. When I place it in a global module, it looks like the dataset is being duplicated I was wondering why this happens when I place it in a global module?
This the code I use and the code I would put in a global module
Dim con As New OleDb.OleDbConnection
Dim dbProvider As String
Dim dbSource As String
[CODE]...
What is Different between global variable and public variable?
View 1 RepliesI have created a usercontrol that contains two rectangle shapes to create a unique button effect and a rounded-corner rectangle shape serving as a border to provide a look similar to a group box. It also contains two labels, one for use with a Text property of the control and the other to indicate the status of expansion of the control. The control is designed to collapse itself when the "button" is clicked leaving only the "button" visible. Clicking it again toggles this affect. I've dubbed it an ExpansionBar. It is also designed to be a container control so that I can add controls to it and allow these to disappear when the bottom portion collapses. This seems to work great! The problem is that the controls contained in this usercontrol cannot be accessed during runtime. In other words, I can add a checkbox to it and it will disappear correctly when the control collapses, but I can't select the checkbox to check it... same thing with any other controls, you can see, but can't touch.
View 2 RepliesIs it possible to run a timer inside of a module? [Code] When I try to debug the application, I get the following error. "Object variable or With block variable not set" Any solutions?
View 2 RepliesI have a Generic Dictionary contained or nested as a child in another Generic Dictionary. I need to be able to access the child dictionary objects by key. When I attempt to do this I get the following error:
"Value of type 'System.Collections.Generic.KeyValuePair(Of String, String)' cannot be converted to 'System.Collections.Generic.Dictionary(Of String, String)'."
So it seems that the contained Generic Dictionary is being returned as a Generic KeyValuePair when accessed via a key as opposed to iterating through the parent dictionary in a For/Each loop.
The first section of the sample works OK (using a key to access a string value in a dictionary).
The second section of the code works OK (iterating through the dictionary values in a For/Each).
The third section of the sample is where the error occurs (using a key to access a nested generic dictionary...see underlined code).
Dim td1 As Dictionary(Of String, String)
For Each thisKey As String In td1.Keys
Debug.Print(td1(thisKey))
Next
Dim td2 As Dictionary(Of String, Dictionary(Of String, String))
[Code] .....
I'm trying to access some images I've copied into a folder within Solution Explorer. For the life of me I can't figure out how to access them programmatically.
I'm using VB 2010 Express Edition. The folder name is 'Images'. The image name is 'checked.png'.
I' ve got a short question concerning BackgroundWorker.Is it possible to have the main code for the BGW in one class and the long process for the BGW (DoWork) in another class or module?
I couldn't find anything helpful on the internet.Here is my code - DoWork in a separate class doesn't work:
[Code]...