On the new of a form i create a control by going:
MyControl = New ctlTest
but it errors saying that ctlTest was accessed from another thread to the one it was created on that line...The control starts a thread on the new event of it that draws on the control - now i know that the thread itself works because when i put a button on the control to start the thread it works..
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
I have a VB.NET form created in VS 2008. This form contains an ActiveXControl (MapPoint 2006 Europe ocx) located and reference here:[code]The project compiles just fine. However, when I run this starting form I receive this error:An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'AxMappointControl1' accessed from a thread other than the thread it was created on.[code]I mention that the very same project was upgraded from VS 2005 on which worked just fine.
View 12 RepliesWhen i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
View 13 RepliesI need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.
im getting this error and i cant figure it out.
Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})
[code]....
This is the error message I am getting:"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on."Now I know there have been some topics similar to this but they didn't really and most were confusing.The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
[code].....
My program crashes with the following error:Controls created on one thread cannot be parented to a control on a different thread.Purpose of the program is to add a control from a thread outside the main thread.Below is the code Private Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
I know AsyncPageTask creates a thread which we can use for long running processes, i was wondering where this thread is created as i am sure it does not use IIS request processing thread, then where this thread exist ?
View 1 RepliesI am in a trouble with this error:"An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss." I am not sure if the RCW-error is related to my problem but I was having this error last January 25. It appears when I am ending my application. I ignored it. The next morning when I resumed coding for my application, the changes I am making does not appear at run-time anymore. Whatever GUI changes I make in my application (at design time), it does not make any effect any longer when I am running the application. What is causing this? I am so afraid if I have to restart my application from the scratch. I have gone far.
View 1 RepliesI have am using a Twitter streaming class library, and would like to update a listbox when a new tweet is posted. I have it all set up to the point where a message box will show when a tweet comes in, but when I try to insert this tweet into a listbox I get this error: The calling thread cannot access this object because a different thread owns it. I don't know what I need to do in order to insert this tweet.
View 4 RepliesI'm having trouble removing buttons from a groupbox that were created via a thread. I can read the elements name, but cant seem to remove it.[code]...
View 4 RepliesI created a new thread to run with a loop to update a textbox (this is just a demo, in reality this thing would go out to a db every x minutes to request an update). I did this on a timer, but i wanted to try to do it on a different thread.. anyways, this is what I have: (one form, one textbox, and this code...)[code]I'm getting a warning through (the "Thread.CurrentThread.Sleep(2000) part is underlined) which states:"Access of Shared Member, Constent Member, enum Member, or Nested Type through an instance; qualifying expression will not be evaluated".
View 5 RepliesI have an app (vb.net) that sues multi threading and have tow problems.
1. The program is used for trading currency markets and mointers prices all day. When a signal is generated it wil place a trade in a new thread. In the new thread it checks to see if a trade is on already and if so it will not place another trade.The problem is it can be too fast and place another trade before the server has processed the first trade. So trade count returns 0. As the system watches 6 accounts I can not just pause the other thread to make sure it has finished before trying ot place another trade.How to i check to make sure the first thread is finished so when i check for trade count it retuns 1?
2.The new thread is inside a class and has a logging class as well. The problem is writing to the text box on the main thread. As the logging thread is created in the new thread it has no access to the textbox. I have tried using invoke but it still does not write to text box as it does not exist in the new thread.How do i reference a form from a class that was created in a new thread?
I have need of either enumerating all the managed threads in a application or listen to when a new thread is created. I can not find anyway to do this through searching the web. It strikes me as odd the the IDE can list all the manage threads, but I can't.
If this is not possible, is there clarification as to why this is not possible.
I need to create a shared class in a DLL that will when it receives a signal will stop all the threads currently running, and gracefully exit the application.
Okay so I have a webbrowser that navigates to 1 page and I want it to wait 5 seconds and go to the next page, then I want it to wait 5 seconds and go to the next page I want it to navigate to and so on... I tried thread.sleep but I don't want to have the form stop completely in case someone wants to minimize the form. I thought about using a timer to tell it how long it wants to stop and go.
View 4 RepliesI wrote a program that writes to a new created file a line of text. Anytime I try to open the new created file, I see a dialog box titled "Inconsistent Line Ending". I do understand why I receive this message. I wrote this program in VB.NET.
View 1 RepliesI am having a problem that I keep getting the following error when I try to run my program.I am trying to make a circle the size of the value of FrameSize.A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
This is the details of the error:
System.InvalidOperationException was unhandled
Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control '' accessed from a thread other than the thread it was created on.
Source=DreamCatcher[code]......
Create a generic label method:
Public Function buildBasicLabel(ByVal labelName As Label, ByVal text As String, ByVal font As Font, ByVal align As Integer)
Dim tmpLabel
[Code]....
For some reason, the label is not lining up with the others once I span it. I'm trying to span it to get all the text to show but once I do, it starts pushing it over. I don't see anywhere where I restrict the size so that shouldn't be the issue.
I tried doing all this in the design and it works just fine. Mimicking the designer code doesn't seem to fix it either unless I'm doing something seriously wrong...
Posting images for clarity. NOTE: The borders are just to show the label alignment and the text should read "Flat-Footed AC"
IMAGE 1: Spanning 1 column (doesn't show all text)
IMAGE 2: Spanning 3 columns (still doesn't show text and you can see it's starting to dis-align)
IMAGE 3: Spanning 6 columns (Still doesn't show text and greatly dis-aligned. It should at least show all the text)