Controls Created On One Thread Cannot Be Parented To A Control On A Different Thread?

Feb 15, 2010

My program crashes with the following error:Controls created on one thread cannot be parented to a control on a different thread.Purpose of the program is to add a control from a thread outside the main thread.Below is the code Private Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click

[Code]...

View 1 Replies


ADVERTISEMENT

VS 2010 Error - Cross-Thread Operation Not Valid: Control TbPlaca1 Accessed From A Thread Other Than The Thread It Was Created On

Aug 13, 2010

In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"

Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()

[code]....

The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".

View 3 Replies

Cross-thread Operation Not Valid: Control 'Panel1' Accessed From A Thread Other Than The Thread It Was Created On." ?

Nov 3, 2011

This is the error message I am getting:

"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:

Panel1.Show()
Label1.Show()
Label2.Show()

why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.

View 4 Replies

Error - Cross-thread Operation Not Valid: Control 'txt1' Accessed From A Thread Other Than The Thread It Was Created On

Jul 21, 2009

I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.

Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()

[code]....

I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)

View 7 Replies

Error : Cross-thread Operation Not Valid: Control 'l_users' Accessed From A Thread Other Than The Thread It Was Created On

Jun 21, 2012

When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.

Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub

View 3 Replies

Threading Progress Bar In .net - Thread Operation Not Valid Control 'ProgressBar1' Accessed From A Thread Other Than The Thread It Was Created On

Feb 17, 2012

Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.

I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes

[Code]...

View 2 Replies

Cross-thread Operation Not Valid: Control 'Autocad' Accessed From A Thread Other Than The Thread It Was Created On

Jun 6, 2010

I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.

Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class

My main class loads frmCad as well as CadApp.

Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub

When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.

View 4 Replies

Cross-thread Operation Not Valid: Control 'label2' Accessed From A Thread Other Than The Thread It Was Created On?

Feb 9, 2011

My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.

[Code]...

View 8 Replies

Cross-thread Operation Not Valid: Control 'lblStatus' Accessed From A Thread Other Than The Thread It Was Created On

Apr 1, 2010

I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:

'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private

[code]....

View 3 Replies

Cross-thread Operation Not Valid: Control 'statusHO' Accessed From A Thread Other Than The Thread It Was Created On

Jun 6, 2009

My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.

System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:

[Code]...

i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.

So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details

View 1 Replies

Cross-thread Operation Not Valid: Control 'lv1' Accessed From A Thread Other Than The Thread It Was Created On?

Aug 4, 2009

Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.

Dim lvi As ListViewItem
For Each lvi In lv1.Items

[code]....

View 1 Replies

Error Saying "Cross-thread Operation Not Valid: Control 'lblOnline' Accessed From A Thread Other Than The Thread It Was Created On."?

Feb 7, 2011

Ok i have a Form with the following

Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")

[code].....

View 12 Replies

Control Accessed From Thread Other Than Thread It Was Created On

Jan 19, 2008

I have a VB.NET form created in VS 2008. This form contains an ActiveXControl (MapPoint 2006 Europe ocx) located and reference here:[code]The project compiles just fine. However, when I run this starting form I receive this error:An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'AxMappointControl1' accessed from a thread other than the thread it was created on.[code]I mention that the very same project was upgraded from VS 2005 on which worked just fine.

View 12 Replies

"Cross-thread Operation Not Valid: Control 'TextBox1' Accessed From A Thread?

Sep 18, 2009

When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."

View 13 Replies

Cross-thread Operation Not Valid Control 'FormSplash' Accessed From A Thread Other?

Sep 5, 2009

I need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""

I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?

View 1 Replies

Cross-thread Operation Not Valid: Control 'FormSplash' Accessed From A Thread Other

Sep 5, 2009

In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.

View 1 Replies

Cross-thread Operation Not Valid: Control 'hiddenrtb2' Accessed From A Thread

Mar 10, 2010

im getting this error and i cant figure it out.

Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})

[code]....

View 1 Replies

Multi-thread Accessing The UI Thread Control, No Exception Thow?

Oct 11, 2011

As we know, one STA UI thread creats the controls only canbe accessed in the UI thread in Winform application. And we need to call control.invoke or begininvoke to run the code in the background thread.

Yes, below code in VB.Net , VS 2010 Winform project can throw the exception "Cross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on."

[Code]...

View 9 Replies

Waiting For Threads - Thread.join Suspend Execution Of Code On Calling Thread Until Spawned Thread Finishes Or Is Aborted

Sep 2, 2010

My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...

With that in mind, I tried this:

For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)

[CODE]...

However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).

View 4 Replies

C# - Where AsyncPageTask Thread Are Created In Asp.net

Dec 29, 2011

I know AsyncPageTask creates a thread which we can use for long running processes, i was wondering where this thread is created as i am sure it does not use IIS request processing thread, then where this thread exist ?

View 1 Replies

Remove Buttons Created In A Thread?

Aug 23, 2009

I'm having trouble removing buttons from a groupbox that were created via a thread. I can read the elements name, but cant seem to remove it.[code]...

View 4 Replies

Created A New Thread To Run With A Loop To Update A Textbox

Apr 17, 2009

I created a new thread to run with a loop to update a textbox (this is just a demo, in reality this thing would go out to a db every x minutes to request an update). I did this on a timer, but i wanted to try to do it on a different thread.. anyways, this is what I have: (one form, one textbox, and this code...)[code]I'm getting a warning through (the "Thread.CurrentThread.Sleep(2000) part is underlined) which states:"Access of Shared Member, Constent Member, enum Member, or Nested Type through an instance; qualifying expression will not be evaluated".

View 5 Replies

How To Reference Form From Class That Was Created In New Thread

Feb 14, 2006

I have an app (vb.net) that sues multi threading and have tow problems.

1. The program is used for trading currency markets and mointers prices all day. When a signal is generated it wil place a trade in a new thread. In the new thread it checks to see if a trade is on already and if so it will not place another trade.The problem is it can be too fast and place another trade before the server has processed the first trade. So trade count returns 0. As the system watches 6 accounts I can not just pause the other thread to make sure it has finished before trying ot place another trade.How to i check to make sure the first thread is finished so when i check for trade count it retuns 1?

2.The new thread is inside a class and has a logging class as well. The problem is writing to the text box on the main thread. As the logging thread is created in the new thread it has no access to the textbox. I have tried using invoke but it still does not write to text box as it does not exist in the new thread.How do i reference a form from a class that was created in a new thread?

View 3 Replies

Write In Worker Thread In A Data Table And Rich Text Box in Main Thread

Mar 4, 2009

I'm creating a Client Server application which involves theServer running some scripts in clients and getting back results in an automated way. In Server, other than Main thread, i have 2 worker threads, a) one monitoring response from clients and b) the other scheduling next available job to respective client which executes that job. The issue here is ,I want these worker threads to write the status of their work in the UI(which comes under Main Thread). Also i need to write things in worker thread in a Data table and Rich Text Box in Main thread. But, I can't do so, since it has been blocked to access one thread's function or property directly from others. Is there any work around to do this?

View 8 Replies

Creating A Progress Bar That Runs On Another Thread While Keeping Calculation In Main Thread

Nov 12, 2009

Preface: I know this is an unusual/improper way to do this. I can do this with a "real" ShowDialog(), background worker/thread, and so on. I am trying to do specifically what I describe here, even if it is ugly. If this is impossible for X reason, I have created a fancy progress dialog for some of our long running operations. I need to have this dialog shown on a new thread while having processing continue on the calling (UI in most cases) thread.

[Code]...

View 3 Replies

Cross-thread Operation Not Valid Exception In Single Thread Application?

Nov 14, 2009

I am getting this exception: Cross-thread operation not valid: Control 'TextBoxOutput' accessed from a thread other than the thread it was created on. in a VB 2008 Windows Forms application that I havent specifically made multi-threaded. I have create a sub called Out() like this:

Private Sub Out(ByVal inString As String)
Me.TextBoxOutput.Text += (Me.TextBoxOutput.Text & inString & vbNewLine)
Me.TextBoxOutput.SelectionStart = Me.TextBoxOutput.Text.Length
Me.TextBoxOutput.ScrollToCaret()
End Sub

and I call it from various events to log messages I am getting from my pbx, which I use a third party open source dll to access. The interesting thing to me is that if I run the deployed application (ie, not in the VS IDE) I do not get any exceptions, it's only from within the IDE.if I add the line: Control.CheckForIllegalCrossThreadCalls = False to the form's constructor, the exceptions stop, but a) this seems like a hacky way to get around the issue and b) the application seems to hang sometimes when I have it set this way.

View 2 Replies

Call A Method That Started On A Background Thread On The UI Thread Calling BeginInvoke And Passing In A Delegate?

Aug 27, 2011

I am trying to call a method that started on a background thread on the UI thread calling BeginInvoke and passing in a delegate as follows:

Dispatcher.BeginInvoke(Function() UpdateApplicationDataUI())

to call this method:

Private Sub UpdateApplicationDataUI()
...
End Sub

However, I get an error in the call to BeginInvoke (the UpdateApplicationDataUI portion of the delegate is stating "Expression does not produce a value").

Me.Dispatcher.BeginInvoke(Function() New Action(AddressOf UpdateApplicationDataUI))

View 1 Replies

BackgroundWorker Thread Communicate With The Primary UI Thread When Encapsulated In A Class?

Jul 1, 2010

A BackgroundWorker thread can pass data to the primary thread. It does it via the RunWorkerCompleted and ProgressChanged events, which I believe run in the primary thread. I would like to encapsulate the BackgroundWorker control in a class so that I can instantiate it more than once. But I don't know how the BGW can then communicate with the primary thread. If the BGW control is within a class, it does not have access to the properties outside the class. In that case, how can the BGW pass data to the thread that instantiated it?

[Code]....

View 3 Replies

Current Thread Must Be Set To Single Thread Apartment Sta Mode Before Ole Calls Can B

Apr 21, 2010

I'm getting the following error:"Current thread must be set to single thread apartment sta mode before ole calls can be made"

I am using Speech.Recognition.SpeechRecognizer and using it to open various dialog boxes. It works fine for the first few but on the third one when it calls the InitializeComponent in the Dialog's New, it throws the above error.

Anybody have any clue what causes this or how to fix it? The SpeechRecognizer seems to run on its own thread, so that seems to be at the root of the problem. If I open thedialog with a button click I don't get an error.

[Code]...

View 1 Replies

Error - An Attempt Has Been Made To Free An RCW That Is In Use. The RCW Is In Use On The Active Thread Or Another Thread

Jun 6, 2011

I am in a trouble with this error:"An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss." I am not sure if the RCW-error is related to my problem but I was having this error last January 25. It appears when I am ending my application. I ignored it. The next morning when I resumed coding for my application, the changes I am making does not appear at run-time anymore. Whatever GUI changes I make in my application (at design time), it does not make any effect any longer when I am running the application. What is causing this? I am so afraid if I have to restart my application from the scratch. I have gone far.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved