As we know, one STA UI thread creats the controls only canbe accessed in the UI thread in Winform application. And we need to call control.invoke or begininvoke to run the code in the background thread.
Yes, below code in VB.Net , VS 2010 Winform project can throw the exception "Cross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on."
[Code]...
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
I am getting this exception: Cross-thread operation not valid: Control 'TextBoxOutput' accessed from a thread other than the thread it was created on. in a VB 2008 Windows Forms application that I havent specifically made multi-threaded. I have create a sub called Out() like this:
Private Sub Out(ByVal inString As String)
Me.TextBoxOutput.Text += (Me.TextBoxOutput.Text & inString & vbNewLine)
Me.TextBoxOutput.SelectionStart = Me.TextBoxOutput.Text.Length
Me.TextBoxOutput.ScrollToCaret()
End Sub
and I call it from various events to log messages I am getting from my pbx, which I use a third party open source dll to access. The interesting thing to me is that if I run the deployed application (ie, not in the VS IDE) I do not get any exceptions, it's only from within the IDE.if I add the line: Control.CheckForIllegalCrossThreadCalls = False to the form's constructor, the exceptions stop, but a) this seems like a hacky way to get around the issue and b) the application seems to hang sometimes when I have it set this way.
im trying to access a richtextbox from another class and thread then the ui and i cant seem to get it working. I currently have the sub thats handling the the work inside of a public class and its a sharedsub, im going to be calling it from several different classes and threads but again i cant seem to get it working. the code looks like this. Public Class SharedSubs
[code]...
i would be calling sub using SharedSubs.Console("stringstring") when this is called from the ui thread it works fine but when its called from anyother thread or class its does nothing,ive confirmed it going thru this code but its not displaying anything in the textbox and its not thru an exception due to delegates either which i figured it would.
When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
View 13 RepliesI need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.
im getting this error and i cant figure it out.
Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})
[code]....
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
My program crashes with the following error:Controls created on one thread cannot be parented to a control on a different thread.Purpose of the program is to add a control from a thread outside the main thread.Below is the code Private Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
I have a VB.NET form created in VS 2008. This form contains an ActiveXControl (MapPoint 2006 Europe ocx) located and reference here:[code]The project compiles just fine. However, when I run this starting form I receive this error:An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'AxMappointControl1' accessed from a thread other than the thread it was created on.[code]I mention that the very same project was upgraded from VS 2005 on which worked just fine.
View 12 RepliesI'm adding multi-threading facilities for the first time. I have a function that is wrapped to be run in a separated thread. This function retrieves data (text) from a combobox and it works for sure without multi-threading.
When I call it as multi-threaded, I get the following error when I try to retrieve the data from the cmobobox: Cross-thread operation not valid: Control 'cmb1stBL' accessed from a thread other than the thread it was created on.
It looks like a restriction of thread-safety... I assume that the child thread cannot read from his parent, to make sure that he doesn't change his parent data. So how can I read the data from the combobox? Should I read the comoboxbox data before calling the child thread?
I am using webbrowser control to parse html.I used to have this code that works just fine
vb.net
Public Shared Sub putHtmlIntoWebBrowser(ByVal html As String)
'WebBrowser.DocumentText = html
[code].....
I had followed the Example on mulit-thread in MSDN, but add a loop in my implementation. But seems like the multi-thread is not working.
Private
Sub
SboE_Start_Btn_Click(ByVal
sender As
System.Object,
[code]....
I'm experiencing an error which complexity and way to approach I can't quite understand.. It looks like two threads not able to work simultaneously.The first thread is the normal program thread, and the problem occurs when the user clicks a button. This sends some messages through a method (PlaceOrder) of an API library object. This method is called 2-3 times in a loop. Handlers have also been added (on program startup) to receive callbacks on events raised by that object, and this is the 2nd thread that contributes to the error.
The error seems to occur when the PlaceOrder method is called while receiving an event from this same object.The result is that the UI freezes. I can trace the error in two places. If I trace the first thread (which is the initial program thread); the freeze occurs when reaching the lock(this) line, in the API-object class. If I trace the callback event, the handlers of this event try to invoke a RichTextBox on the form, and the freeze occurs on the line <RichTextBox>.Invoke(....), as indicated below.
The thing is that when pushing the button, there is a loop which calls the method of the API-object 2-3 times. And the first time succeeds, but the 2nd time it seems to crash in some way with the callback. It would be nice if I had made some silly mistake with the invoke code, but I don't think I have, as it updates fine prior to the error.. I'm not sure, but it may be relevant that it's in fact the same object, so early in my program I add this event listener (which is the one that updates the RichTextBox):
AddHandler ibclient.Error, New EventHandler(Of ErrorEventArgs)(AddressOf client_Error)
..while later, related to the freeze, I have:
ibClient.PlaceOrder(....)
But I'm handling a lot of calls forth and back other than these, and haven't experienced any problem before.it doesn't give any exception or error message, it just freezes.The invoke stuff in the form code, which should be as per trusted examples: (Freeze occurs at blue highlight)
Private Delegate Sub SetRichTextBoxInvoker(ByVal message As String)
Private Sub OnLogUpdate(ByVal message As String)
If Me.rtbTwsMessages.InvokeRequired Then[code]........
How do i go about multi-threading that, it's just an example project, so i can try and learn from it. As i'm having a hard time understanding JMC's tutorial as it doesn't directly relate to what i'm trying to do [code]When you hit 'Start', the start button is disabled and the Label1 then changes to "Downloading".The data is then downloaded and put into the Textbox1.Label then reads "Complete" Start button is enabled.
View 5 RepliesI have a function that is called when a file is modified in a folder. This function updates the items of a listview which is stored in the UI.Here is the function :
Private Sub FileChangeNotify()
Try
LstMoulures.Items.Refresh()
[code]....
Here is the error: "Le thread appelant ne peut pas accéder à cet objet parce qu'un autre thread en est propriétaire." (Translation : The calling thread cannot access this object because it is owned by another thread)
ccessing a UI object with a Thread gives an error
View 2 RepliesI have an exceptionhandler function that basically just writes a line to a textbox on Form1. This works fine when being run normally but the second I use a thread to start a process it cannot access the property. No exception is thrown but no text is written to the textbox:
Public Sub ExceptionHandler(ByVal Description As String, Optional ByVal Message As String = Nothing)
' Add Error To Textbox
If Message = Nothing Then
Form1.txtErrLog.Text += Description & vbCrLf
Log_Error(Description)
[Code] .....
Is it possible to access a form's properties from a thread this way or would it be easier to write to a text file or similar and refresh the textbox properties every 10 seconds or so (Don't see this as a good option but if it's the only way it will have to do!).
I�m having trouble accessing a flexgrid from a different thread.Basically in my main mdiParent I have some code like this, this code is triddered when the aplication receives a message from a remote client
Public Delegate Sub UpdateActionsGridStatusDelegate()
Me.Invoke(New UpdateActionsGridStatusDelegate(AddressOf frmActions.UpdateActionsGridStatus))
I also have a form called frmActions, which contains the function �UpdateActionsGridStatus�
Public Sub UpdateActionsGridStatus()
MsgBox("Actions row cnt = " & Me.flxActions.Rows.Count - 1)
End sub
If I run it from a button on the flxActions form it works fine.When I run this function from a thread it returns 0 rows!