using Visual Web Dev 2008 Express and i am having an error when converting a set of integers to string. see code below. I cannot work out what it is that i am typing incorrectly. For ref, i return ten 0's as the result.
Dim numbers(9) As Integer
For i As Integer = 0 To numbers.Length - 1
numbersString &= numbers(i).ToString & " "
Next
textbox2.text = numbersString
Okay, so I have to convert letters to numbers, each letter in the alphabet is assigned a value that I've assigned. But I need to run through a textbox letter by letter, and convert that letter to the numbers that I have, and append. So if I had a textbox with "JANE", it would output 942383312318265498643 assuming that the following letter values were true
A - 833123
B - 2277765
C - 33935654
[code].....
I'm working with byte arrays and building and disassembling Int16/UInt16 and Int32/UInt32 from them. I'd like to not worry about the Sign bit until I return the final value and just have the code return the appropriate value for the data type that was requested to be converted to/from the byte array
View 3 RepliesI am playing around building a VB.net windows forms app.Mostly going well, but when I do executenonquery I am getting the error:Failed to convert parameter value from string to int32. I am unclear where the problem is but here is my code......
Private Sub cmdClockIn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdClockIn.Click
Dim empNum As Integer = Convert.ToInt32(frmMain.txtEmpID.Text)
[code]....
i have a textbix in which the user is restricted to enter date in the following format "dd/mm/yyyy" .
then in code behind I am calling a stored procedure to which i am passing this date as a datetime parameter but i get an error
objCmd.Parameters.Add("@DateOfApplication", SqlDbType.DateTime).Value = Convert.ToDateTime(txtDateOfApplication.Text.Trim)
how I might cast convert this string date into datetime to pass to my stored proc
I have the following code:
Imports System.Data.SqlClient
Public Class Main
Protected WithEvents DataGridView1 As DataGridView
[code]....
When I debug this, I put the line break on that line and look at the Table Value, which shows 0, but I know that there is data for that time frame.
i am using DateTimePicker control....my code is TextBox2.text=DateTimePicker1.Text.......while changing it correctly dispaly the selected date in textbox......the problem is i want to store the date in my database of field datetime type........when i click the add button it shows "Syntax Error Converting DateTime from String"
View 1 RepliesGetting this error when updating a row via a gridview with a sqldatasource in Vb.net/SQL Server 2000. No matter what input (1/1/2010, blank, etc) I give it I can't seem to get it right.
Code before the input is passed to the sp:
Dim sqldatenull As DateTime
Dim DateVerify As DateTime
sqldatenull = DateTime.MaxValue
[Code]....
Im in the process of building a call loggin system and its finally been put on the server, but i keep getting the above error "Title" the first stage it goes to be authorised and when the authoriser auths it...it updates the table with the date they authorised it. which is fine, the next stage is the Business Analyst where they check all the content of the task and then approve it but for some reason unknown to me it keeps falling over on the .dateAuthorised
My Sql Column to hold the date authorised is a Datetime datatype and im converting a string to a data time within the procedure this is my Code behind page
Dim StatusNew As Integer = 53
Dim CurrentStage As Integer = 51
ITUpdateTaskTable.Add("@spWorkID", Replace(TskNumLab.Text, "LC", ""))
[Code].....
I have the following code:
Imports System.Data.SqlClient
Public Class Main
Protected WithEvents DataGridView1 As DataGridView
[Code]....
When I debug this, I put the line break on that line and look at the Table Value, which shows 0, but I know that there is data for that time frame.
I am getting an error with this Dim Web As New WebClient Web.Proxy = "69.196.16.237:62159" It says runtime errors may occur when converting string to System.Net.IWebProxy What does that mean?
View 9 RepliesThe error is: Conversion failed when converting date and/or time from character string.Basically I'm trying to make it so that when someone clicks a location in a list box it increments the correct field in a Stats table by 1 to say that they clicked the location. I've been trying to solve this for a while now and can't get anywhere. My date is in date format, and so is the Date field in my Stats table. My code can be seen below.
Dim Current As String
Dim Check As String
Dim objCmd2 As Object
[code]....
The issue comes in with the second SQL statement I think. I don't understand why adding a date into a date field would be an issue, I've tried adding it as a string which didn't work.
Dim i as integer
For i = 0 to 365
sqlinsert.InsertCommand="insert into cashdate (date) values (getdate()+'" & i & "')"[code]....
getdate is a function in the database that returns the datetime of now i have an error that says conversion failed when converting date or time from character string .what to do now ??
I tried coding for an application that will display the positive integers, negative integers and zero entered in a inputBox. for some reason it keeps crashing down.here is my code. paging all visual basic professionals. [code]
View 6 RepliesMy program uses the serial port to receive characters as a string, then it should extract the integers from this string. This seems fairly simple, but so far has been a very tedious job.
My string is called txt. The problem is that there's no telling how many characters / integers txt will hold at any given moment. For instance, it may equal "4" or "4 5 6 7" or "P 0 1 2 3 4 5 6...255" - with spaces included. I need to reference every number within this string to use as data. I've tried the following:
dim c as new char
dim n as new integer
dim i = 1
[Code].....
I have a following value "1pm 2am" that I'm using a regular expression againts in SSIS to extract hours from in order to store separately. I've tried using both of the regular expressions below but both only yield the first number "1".
"(d+)"
"(*?d{1,2}*?)"
This should be fairly easy, yet I have no idea on how to approach this. Perhaps the split command . Anyway, what I need to do is split as string into two integers.
For example MyStringXS = "10, 20"
I need to end up with:
MyIntegerX = 10
MyIntegerY = 20
BUT!
These strings obviously change. So it could be MyStringXS = "120, 230" Or MyStringXS = "12340, 20342" And so on.
I have a bunch of 10 digit integers that I'm passing in a URL. Something like: "4294965286", "2292964213". They will always be positive and always be 10 digits. I'd like to compress those integers into the smallest possible form that can still be used in in a URL (aka letters and numbers are perfectly fine) and then uncompress them later. I've looked at using gzipstream but it creates larger strings, not shorter.
View 4 RepliesWhat is the fastest way to convert a String into an array of Short integers representing the character codes?[code]...
View 2 RepliesI have a code where I search a text file for for example: "2320018200000", then it looks it up and finds a line like this[code]...
I want it to put that entire line in a label, but for some reason it skips the "3 1604001Sf" in the start. [code]...
I have a string like this:Correct Strings Dim value As String = "45, 2111,56, 1, 9, 99, 62,"Invalid Strings:Dim value As String = "10.01, 12,, , "I need to evaluate this string that has this format indefinitely,The regex evaluate the commas who are in series and are only integers.
View 2 RepliesSo I had a smart idea to make a dictionary with all my variables so I could save them easily in chunks. This includes String, Boolean and Integers. When I was in Framework 3.5 I only had a few warnings about stuff that I didn't have coded in, but now in Framework 4 I am maxing out all my warnings with Implicit conversions. Personally I don't want to go to every number and put quotes around it put quotes around "True" because then it may change the method.
Public Function loadGeneral(ByVal fName As String) As Boolean
Dim tempDict As New Dictionary(Of String, String)
For Each kvp As KeyValuePair(Of String, String) In GeneralSettings
Dim v1 As String = kvp.Key
Dim v2 As String = QuizZing.My.Settings.GetSetting(fName, v1)
[Code] .....
i have a form with 12 text boxes. I'm trying to get the data from those text boxes to "save", and when that form is opened again have the data be inserted back. This form has different time slots so I need to be able to have it save and repopulate based on what time slot I am clicking on. I was going to have it read the data by splitting it with commas, then inserting them back into the correct fields but it's not working. I had it write the results to a text file and they get written correctly and inserted back, but the problem with that is it only reads that text file so every time slot I open up gets the same data. Below is code I used to get the data when the Save button is clicked. [Code]
Problem is I get an error saying "Char values cannot be converted to Integers" on the first line, the (","c) part. Plus even then I don't know if this would do what I want. EDIT: Ok I fixed the error and got it kind of working, but now I have a new question. Now, I put a button on the form that I can use to load the data when I choose to just to test. This works, it takes the data from each time slot and loads it back when I click the button. New question is how can I get it to load as soon as I open the existing appointment? Putting it in the form load event won't work because it checks for data before there is any in there.
I have a class and method exposed to a client asp.net app. The class looks like
<DataContract()> _
Public Class Class1
Private v_string As String
Private v_integer As Integer
[code]....
The method is declared as
<OperationContract()> _
Function GetStuff(ByVal bar As Class1) As String
In the client code I create an instance of Class1 and set the values for v_string and v_integer, but using Wireshark to look at the xml being sent to the server only a value for v_string is being sent as part of Class1. I'm guessing this is because it considers the value of v_integer to be null/not set. Here is an example of the client code.
Dim MyService as New Service1.ServiceClient
Dim test as New Service1.Class1
test.P_integer = 1
[code]....
how different types are passed/used since Integer is a intergral type and String is a class, but can't seem to work out what to do to fix the problem.
I have a form with 12 text boxes. I'm trying to get the data from those text boxes to "save", and when that form is opened again have the data be inserted back. This form has different time slots so I need to be able to have it save and repopulate based on what time slot I am clicking on. I was going to have it read the data by splitting it with commas, then inserting them back into the correct fields but it's not working. I had it write the results to a text file and they get written correctly and inserted back, but the problem with that is it only reads that text file so every time slot I open up gets the same data.
Below is code I used to get the data when the Save button is clicked. [Code]. Problem is I get an error saying "Char values cannot be converted to Integers" on the first line, the (","c) part.
Basically I have and array of integers that vary in size. I need to compare each number to each other number and display which number is repeated. For example:
Dim ints() As Integer = {1,2,2,5,4,6}
The number that shows up more than once is 2.
How can I run through the array and compare each integer with the numbers in the array. I tried a for loop but it didn't return the value I was looking for.
I'm having a problem converting a string of letters to a string of numbers. I've tried:
Dim A As String = ""
Dim strOutput As String = ""
Dim X As Integer = 0
[Code].....
I have this code which populated my form;
Private Sub populateprojdetails()
Dim cmd As New SqlCommand
Dim conn As SqlConnection = GetDbConnection()[code]....
The Error I receive is "Error converting data type varchar to numeric".
I used the XSD.exe tool to convert XML to XSD then generate vb code behind for the XSD. It is giving me errors in the code even though it was auto-generated. I am weary about messing with the code since it was auto generated.
View 4 RepliesI have created a website in visual studio 2005 with some master pages. but whenm migrating to visual studio 2008 it is showing error (when I'm running the page) master page cannot be loaded.
View 3 Replies