Find Out If CheckBox1 Is Checked Or Unchecked?

Apr 28, 2011

from the code below I am trying to find out if checkBox1 is Checked or Unchecked. and then I want my settings to remember if it is checked or unchecked. so when the form is loaded I want my settings to load the last action.... ie checked or unchecked.

so if a user check's the checkbox1 then the message will not show, But if it is unchecked the the messageBox will be shown

Private Sub CheckBox1_CheckedChanged(sender As System.Object, e As System.EventArgs) Handles CheckBox1.CheckedChanged
If CheckBox1.Checked = True Then

[Code]....

View 7 Replies


ADVERTISEMENT

Asp.net - When Type 1,2 Then Checkbox1 And Checkbox2 Will Disabled And Unchecked?

Nov 14, 2010

Possible Duplicate: I have 4 checkboxes and 1 textbox in webform if i type in textbox 1,2 then checkbox1 & 2 will be checked ! I have 4 checkboxes and 1 textbox on a web-form. If I type 1,2 in the textbox, then checkbox1 and checkbox2 will be checked. The code for this is as below. But what I want is that when I type 1,2 then checkbox1 and checkbox2 should be disabled and unchecked.

Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim separator As Char = ","c
Dim allIIDs As New List(Of Int32)

[code]....

View 1 Replies

Freeze The Value By Using Checkbox1.checked = True?

Dec 19, 2010

My teacher in computer programming told me that in order to make a next and back button i must do the following:

button1_click
dim pic as string = 1
if pic = 1 then
picbox1.image = my.resources.blahblahblah

[code]....

this does not work and i'm trying to freeze the value by using checkbox1.checked = true

View 4 Replies

Change Checked State Of Checkbox1 On Form1 From 2?

Mar 22, 2010

Let's say I have a checkbox1 control on form1. I then open form2. I want to be able to change the checked state of checkbox1 on form1 from form2.[code]...

View 5 Replies

Asp.net - If Type In Textbox 1,3 Then Checkbox1 And Checkbox3 Will Be Disabled Not Checked?

Nov 14, 2010

if i type in textbox 1,3 then checkbox1 and checkbox3 will be disabled not checked !The coding i provide below is working but ,...it chekec the cjeckoxes according to the text in textbox i.e (1,3) then checkbox1 and checkbox3 will be checked ... but i want when i type 1,3 in textbox then checkbox1 and checkbox3 will be disabled and remain unchecked .

Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim separator As Char = ","
Dim allIIDs As New List(Of Int32)
If TextBox1.Text.Length <> 0 Then

[code].....

View 1 Replies

Program Which Opens Files/programs That Have Selected And Checked With Checkbox1, 2 And 3

Jun 13, 2011

I'm developing the program which opens files/programs that I have selected and checked with checkbox1, 2 and 3(i haven't coded the tihrd one yet, but it doesn't affect). The first program runs instantly and others run after X interval if it's wrote in textbox4 and checked by checkbox4. So Checkbox is like an activator for this interval. If checkbox4 isn't checked then every program should run instantly. The problem is that checkbox4 isn't doing a job. Program activates the interval if there are somekind of numbers in textbox4. It doen't matter that is the checkbox4 checked or not.

Here is the

Public Class Form1

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

[CODE]...

And here is the screen of the program:

View 6 Replies

Checkstate.Checked Don't Work When Unchecked?

May 28, 2009

I have this code:

Code:
Private Sub CheckBox1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged
If CheckState.Checked Then
AmxModXInstallDir.Enabled = False
Button1.Enabled = False

[code]....

When i check the box, it enables all controls, if i uncheck it, nothing happens.

View 3 Replies

Creating A Checkbox That Can't Be Checked Or Unchecked?

Mar 3, 2012

I want to create a solid checkbox that is checked by default, and is not clickable. If you click it, nothing will happen . how to do this?

View 2 Replies

Execute Some Code Only When An Item Is Checked Or Unchecked?

Jan 8, 2011

The check box list has an event called "ItemChecked" or something, which triggers when an item is about to change its checked status.

So, it is before the check occurs.I couldn't find an event that occurs after the item has changed.. I want to execute some code only when an item is checked or unchecked.

View 2 Replies

Trap Checked / Unchecked State Of A Datetimepicker Through An Event?

Mar 14, 2009

In Vb.net 2005 how can i trap the checked/unchecked state of a datetimepicker through an event. I'm trying to execute two different methods based on the checked/unchecked state of a datetimepicker when the user clicks the datetimepicker. When the user checks the dtPicker Method A is executed, when the user unchecks it Method B is executed. How can i trap it.

View 1 Replies

.net - Overriding GetHashCode In VB Without Checked/unchecked Keyword Support?

Jan 11, 2011

So I'm trying to figure out how to correctly override GetHashCode() in VB for a large number of custom objects. A bit of searching leads me to this wonderful answer.Except there's one problem: VB lacks both the checked and unchecked keyword in .NET 4.0. As far as I can tell, anyways. So using Jon Skeet's implementation, I tried creating such an override on a rather simple class that has three main members: Name As String, Value As Int32, and [Type] As System.Type. Thus I come up with:

Public Overrides Function GetHashCode() As Int32
Dim hash As Int32 = 17

[code]....

Problem: Int32 is too small for even a simple object such as this. The particular instance I tested has "Name" as a simple 5-character string, and that hash alone was close enough to Int32's upper limit, that when it tried to calc the second field of the hash (Value), it overflowed. Because I can't find a VB equivalent for granular checked/unchecked support, I can't work around this.

I also do not want to remove Integer overflow checks across the entire project. This thing is maybe....40% complete (I made that up, TBH), and I have a lot more code to write, so I need these overflow checks in place for quite some time.

What would be the "safe" version of Jon's GetHashCode version for VB and Int32? Or, does .NET 4.0 have checked/unchecked in it somewhere that I'm not finding very easily on MSDN?

EDIT:Per the linked SO question, one of the unloved answers at the very bottom provided a quasi-solution. I say quasi because it feels like it's....cheating. Beggars can't be choosers, though, right?

Translated from from C# into a more readable VB and aligned to the object described above (Name, Value, Type), we get:

Public Overrides Function GetHashCode() As Int32
Return New With { _
Key .A = _Name, _

[code]....

This triggers the compiler apparently to "cheat" by generating an anonymous type, which it then compiles outside of the project namespace, presumably with integer overflow checks disabled, and allows the math to take place and simply wrap around when it overflows. It also seems to involve box opcodes, which I know to be performance hits. No unboxing, though.

But this raises an interesting question. Countless times, I've seen it stated here and elsewhere that both VB and C# generate the same IL code. This is clearly not the case 100% of the time...Like the use of C#'s unchecked keyword simply causes a different opcode to get emitted. So why do I continue to see the assumption that both produce the exact same IL keep getting repeated? </rhetorical-question>

Anyways, I'd rather find a solution that can be implemented within each object module. Having to create Anonymous Types for every single one of my objects is going to look messy from an ILDASM perspective. I'm not kidding when I say I have a lot of classes implemented in my project.My final implementation, which fits the constraints of GetHashCode, while still being fast and unique enough for VB is below, derived from the "Rotating Hash" example on this page:

'// The only sane way to do hashing in VB.NET because it lacks the
'// checked/unchecked keywords that C# has.
Public Const HASH_PRIME1 As Int32 = 4

[code]....

I also think the "Shift-Add-XOR" hash may also apply, but I haven't tested it.

View 3 Replies

Asp.net - Check If A Checkbox List Item Is Checked/unchecked?

May 14, 2012

I have a checkbox list which is filled with entries from my database on page load. I need to update an entry in my database when a item is checked and when an item is unchecked. Right now I am doing the following:

<asp:CheckBoxList id="check1" AutoPostBack="True" TextAlign="Right" OnSelectedIndexChanged="Check" runat="server">

</asp:CheckBoxList>

And the function:

Sub Check(ByVal sender As Object, ByVal e As EventArgs)
Dim sql As String
If check1.SelectedItem.Selected = True Then[code]....

The error is: "Object reference not set to an instance of an object." Is there a better way to check if a list item is checked or unchecked?

View 1 Replies

Button In Toolstrip Checked / Unchecked Depending On Window State

Jun 3, 2011

I have a Main form, called Main.vb, that is a Parent Form. I have another form called Notes.vb. Inside Main.vb I have a toolstrip with a button on it called Notes. I'm wanting to change the checked status of the Button to either True when the Notes.vb window is open inside the parent or to false when it is close. Is this possible?

View 6 Replies

Forms :: Trap The Checked/unchecked State Of A Datetimepicker Through An Event?

Mar 14, 2009

How can i trap the checked/unchecked state of a datetimepicker through an event. I'm trying to execute two different methods based on the checked/unchecked state of a datetimepicker when the user clicks the datetimepicker. When the user checks the dtPicker Method A is executed, when the user unchecks it Method B is executed. How can i trap it.

View 6 Replies

Checkboxes And 1 Textbox In Webform If I Type In Textbox 1,2 Then Checkbox1 & 2 Will Be Checked?

Nov 13, 2010

I have 4 checkboxes and 1 textbox in webform if i type in textbox 1,2 then checkbox1 & 2 will be checked !

directly after if i type 3,4 in textbox then the all 4 checkboxes will be checked But i want the checkbox will be checked accorcding to the data displayed in text box ..if textbox1.text =1,2 then only checkbox1 and checkbox2 will be checked and others are remain unchecked ...

and if i checked checkbox3 and checkbox4 then only 3 and 4 will be checked and others are unchecked...

how to do that in page load event I want to do this with 50000 checkboxes ..and more.... which displayed in my webform

[Code]...

But if i type 1,2 in textbox then checkbox 1 and 2 would be checked and agin i type 3,4 then checkbox1,2,3 and 4 all the checkbox will be checked ...but i want ...what everi type in text box only that checkboxes will be checked and others will remain unchecked.....

View 3 Replies

Count The Total No. Of Asp.net Checkboxes, Checkboxes Checked, No. Of Checkboxes Remain Unchecked In Webform Using .net?

Dec 9, 2010

How to count the total no. of asp.net checkboxes, checkboxes checked, no. of checkboxes remain unchecked in webform using vb.net ?I m using Visual studio 2008 with vb as a language ..I my webform i have 10 checkboxes...i wanna count total no. of checkboxes in webform in textboxes1 total no. of checkboxes checked in webform in textbox2 total no. of checkboxes remain unchecked in webform in textbox3?

View 2 Replies

Winforms - Iterate Over The Items And Find Out Which Checkboxes Are Checked?

Feb 26, 2009

I am using the winform datarepeater control from vb.net power pack. All of the items on the repeater are readonly except for a checkbox column.I want to iterate over the items and find out which checkboxes are checked. I can't find a collection of datarepeateritems on the control and help is scarce.

View 3 Replies

VS 2010: String Manipulation - Cycle Through Every Item In The Listbox And Find The Ones That Have Been Checked

May 31, 2012

[Code]...

Then skips straight to the Else without performing the two lines in between, regardless of whether the item was checked or not checked. It doesn't crash, doesn't throw any errors, so I am assuming I coded this wrong somehow.

View 1 Replies

DB/Reporting :: Listview VB 2008 : Find The Items Checked/create The Needed Handle?

May 4, 2011

Have a populated listview with check boxes. If the item is checked I want to send it to report for printing. This code is bypassed:

Code:
Private Sub GetSelectedItems()
If Not Me.ListView1.SelectedItems.Count = 0 Then

[code]....

Count is always = 0. This seems to work only if the item is double clicked. And then only one item is returned in the msgbox. MSDN says "The SelectedItems property will not contain any items if the property is accessed before the ListView handle is created, which typically occurs when ListView is initially loaded for display in the form. You can check to see if the handle is created with the IsHandleCreated property."

When I tried to check for the handle, an error said something about overloading. So I added this:

Code:
Public Overloads ReadOnly Property GetSelectdItems()
Get
If Not Me.ListView1.SelectedItems.Count = 0 Then

[code]....

Which does not help. How to find the items checked/create the needed handle?

View 1 Replies

Javascript - Insert Checkbox Checked Value When Checked To Textbox As Comma Separated String

Nov 9, 2010

Insert checkbox checked value when checked to textbox as comma seperated string in vb.net or javascript

suppose i have 3 checkboxes and and 1 textboxes in my webpage.aspx

when i checked checkbox1 and checkbox2 then in textbox it will appear as 1,2 only on checkboxes checked event ...

and i want its revert also :

if i set textbox de

View 1 Replies

Checked List Box Checked Data Pass To Listview [with If Uncheck It Is Removed]

Sep 22, 2011

my form contains a checked list box [data coming from the database] a combo box [bind to a database table product] and a listview [was previously a listbox]

[Code]...

View 5 Replies

Loads Up 4 Images If Usb Stick Is Checked And A Different 4 If Memory Card Is Checked?

Feb 20, 2010

project im working on for my course,the idea is a photo printing machine that loads up 4 images if usb stick is checked and a different 4 if memory card is checked. and then whatever image is selected appears in the big picturebox on the left [URL] i have 2 print size options set as radiobuttons, radiobutton 1 = 6x4, which costs 25cent per photo, radiobutton 2 = 8x10, and is 50cent per photo.i also have a textbox which will display the number of copies to be printed So here's my dilemma, when the print button is selected alongside one of the radiobuttons i want it to display a message saying something like this "you have selected (whatever the amount of copies)of this photo sized 6x4, or 8x10 depending on which radiobutton is selected, and i want it to display the total cost which is the number of copies multiplied by the rate for the print size selected, then an option saying "Do you wish to proceed" Yes or No.

I did something similar to this in class earlier in the year but cant remember it, it was an airline booking program with 3 types of payment cash, visa or mastercard,upon booking a message popped up saying there is a certain percentage discount for using visa or mastercard

View 5 Replies

Forms :: Radio Button Checked And Not Checked At Same Time

May 15, 2010

im making dynamic sql statement rmode is a radio button and tmode is a combo box

[Code]...

View 2 Replies

Got A Checked Listbox On Form Which Saves The Checked Items?

Jun 6, 2012

I've got a checked listbox on my form which saves the checked items to a spot in my database on the .ItemCheck event.But there's a problem, when I begin checking items, I check the box and click off it, but it doesn't save. (This is if I've only chosen one item)

If I choose two or more items it will save, but unchecking them takes a lot of clicking around to figure it out.Is there a better event that I can use? I've tried the SelectedIndexChanged and that has the same result, there's a lot of clicking around in the checkboxes to end up with the desired selected items, and it does not allow a single item.

View 6 Replies

Listview Checked Item - Get The ID Of The Person Whose Box Is Checked With Sub

Apr 30, 2011

In a listview with check boxes, there are two fields being loaded, ID and Lastname. With this information I want to get the ID of the person whose box is checked with this sub:

[Code]....

View 3 Replies

VS 2008 Checked Treeview Get All Checked Nodes?

Sep 22, 2009

I trying to get what I think should be a simple thing. I have a checked treeview. I need to get the text of each checked node into a string. For the life of me I can't get it. I am trying to loop thru all the nodes and see if they are checked but I keep getting a "object reference not set to an instance of an object" but I don't know why.

Dim value As String
Dim node As TreeNode
Dim i As Long

[Code]....

View 2 Replies

.net - Unchecked Integer Addition In .Net?

Mar 8, 2010

I have a project where I want to have checked arithmetic by default, except for one performance sensitive spot. Unfortunately, VB.Net doesn't have an 'unchecked' block.Ideally the framework would have some sort of integer type with explicitly unchecked arithmetic, but I didn't find anything like that. I did find that expression trees have binary expressions for unchecked operations, but the delegate overhead cancels out the unchecked advantage (and then some).

Currently I'm converting the inputs to UInt64/Int64 before doing the arithmetic, then converting back (with a bitwise And to ensure in-range). It's about 50% slower than unchecked arithmetic (according to profiling).

Moving the arithmetic-sensitive part to a project with unchecked arithmetic might work, but it seems like overkill to give it an assembly all to itself.

View 1 Replies

Check One The Other Two In Second Group Not Unchecked?

Aug 3, 2011

I have a Four radio button on the form. I want to make them in two groups.Now when i checked anyone the remaining three are unchecked. I want to make two radio buttons in one group and in another group two.Suppose in one group when i check one the other two in second group not unchecked. How i do it?

View 1 Replies

Get All The Radiobuttons To Be Unchecked When Program Is Run?

Dec 6, 2009

How do I get all the radiobuttons to be unchecked when program is run? Right now there is always one button that is checked. Using VB2008. [URL]

View 9 Replies

Wpf - Uncheck SelectAll If One Of Row Is Unchecked?

Aug 25, 2010

I have an issue. When I check SelectAllCheckBox all checkbox column in ListView is checked. But when I unchecked one of row checkbox the SelectAllCheckBox is still checked. How to uncheck SelectAllCheckBox if one of row is unchecked? And second question is how highlight ListView rows when SlectAllCheckBox is checked?

[Code]...

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved