I have work with BindingSource in VB NET 2008
--
dim bsA as new bindingSource
BsA = DB
DataGridView.dataSource = bsA
[code]....
but data has changed this is correct ?I don't wont change this data what I have to do ?
I think I started out with a misunderstanding of what happens with addnew() and canceledit().
I have a strongly typed datasource in memory.
I call bindingsource.AddNew()
Later I find that the record the user was trying to add already exists, so
bindingsource.CancelEdit()
I have not set any properties other than datasource on the bindingsource.
My assumption was that the CancelEdit() would rollback the blank row added by the AddNew(), but I'm getting some odd errors which lead me to believe this is not true.
Could someone verify that CancelEdit() leaves the new row?
I have a problem with bound controls and a bindingsource. I'm using vb 2008 and .net 2.0.I have a few text boxes bound to columns in the binding source.The backend is a Access database.
I'm using a bindingnavigator to add a new record.The additem event works fine.If the user clicks an icon to cancel edit, the code executes bindingsource.canceledit. This seems to work fine. The row count on the navigator returns to the correct number before the addnew event occurred. However, the bindingsource seems to have an empty record in it. As the bindingsource navigates, it eventually gets to the empty record depending on where it's position was when the addnew event fired.
The error received is an invalidcastexception. This error occurs because the record is repostionedand each time this occurs the code performs calculations using values from the bound controls.But when it navigates to the empty record, the values in the bound controls are null.Is there other code besides canceledit to remove the empty record?
Basically I try to get a DataGridView and a BindingSource working inside a class. I define them by:
Dim TempDGV3 As DataGridView = New DataGridView
Dim TestBinding As BindingSource = New BindingSource
When I manually add columns to the DataGridView, it works perfectly, but when I set it's DataSource to a bindingsource from a base class, it doesn't load data and keeps throwing 'object does not exist' errors. The bindingsource mentioned here did, however, work on other DataGridViews that are defined in the base class (and implemented in the form to which the base class belongs)
Same for the BindingSource(not the above mentioned, but the one I try to create inside the class in the beginning of this post). I try to use it in the following way:
TestBinding.DataSource = TempDGV3
TestBinding.Filter = filterString()
SourceDataGridView.DataSource = TestBinding
But the BindingSource keeps returning 'Nothing' for it's datasource and basically doesn't work. However, the SourceDataGridView mentioned here gets filled with 63 columns with "AllowUserToAddRows" and other properties when the columns names are asked.
So my question is: how do I get the BindingSource and the DataGridView to work in this class? I'm getting the feeling I'm missing out on something very obviously here. If that's not the case, I can report back with more code?
have a query in SQL, returns the results I expect, however when I copied this query to a bindingsource.filter call,I get "Missing Operand" errors
Me.ItemsBindingSource.Filter = String.Format("SELECT * FROM items WHERE (GETDATE()) BETWEEN (items.ItemStartDate) AND DATEADD([month], items.ItemOccurances, items.ItemStartDate)")
I'm using a SQL Server database and a bindingsource, and i want to filter a numeric field in order to, for instance, when I write 1, the grid shows all the rows in which that field begins whith 1 (1,10,14...). In order to do this, I have to convert the field to varchar, but VB shows an error message when using cast or convert functions. I have this sentence in my
[Code]...
I run this, but my row of data is still being deleted.
PreTicketBindingSource.CancelEdit()
Below is my revert subroutine:
Private Sub BindingNavigatorRevertItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BindingNavigatorRevertItem.Click
Me.GpheaderBindingSource.CancelEdit()
[Cdoe]....
My problem is Me.gpdetailbindingsource.canceledit() cancels only the current row being edited. I want all rows of my detail be reverted.
The following works:
[Code]...
However, the following doesn't work:
I am having trouble figuring out how to get my function (lines 45-57) to work. Option Strict is supposed to be on. I am getting the error "Option Strict On disallows implicit conversions from 'Decimal' to 'String'." This is an intro problem so its going to be basic. [code]
View 2 RepliesI expected the "Left" function in the code below to return the letter "A" but it returns nothing? Also, as a further test, Left(CP, 3) returns nothing?
View 3 RepliesI have the following function written for dot net 3.5 that uses "ElementAt()" to successively return a value from a dictionary collection.
Public Function GetNextEntryInfo() As EntryInfo
If mFileInfo.Count > mIndexLoc Then
Dim entry As EntryInfo = mFileInfo.ElementAt(mIndexLoc).Value
[Code].....
Basically, I'm trying to do some string manipulation to edit directories. I found some code to try and edit the directories, but when I use it it doesn't recognise 'right' as being a function and only recognises it as a right property, thus producing an error.
I was wondering if there's something I haven't imported or if perhaps 'right' is an obsolete function that was used in VB6 but replaced with something. The code I have is as follows:
[Code]...
I have an image with a button for zoom on it. I want to zoom-in and zoom-out the image with mouse scrolling up and down, right and left. Can anyone help me with some example to understand how this can be done?
View 3 RepliesI'm using some functions which can be compared to encoding/decoding, but it's a really simple and basic application, not really an encoding function.The problem is, the decoding function doesn't seem to work. For some reason, it doesn't work correctly, and I'm a bit stressed, so even after searching for a while, I can't seem to find it.[code]
View 2 RepliesI want to change my default keyboard Layout for a installed another Keyboard Layout using my VB application.I googled about this and find Function LoadKeyboardLayout() Function to do that.But Is this support in vb 2010.When I wrote below code and there is no syntax error.But when I run the program there is an error called "PInvokeStackImbalance was detected." How can I solve this in vb 2010. Here is my code:
[Code]...
I tested every example I found but it doens't work in vb 2010 express... Do I need to install anything moor to make it work?
View 2 RepliesI am creating an text encryption/decryption for my friend and I to use on facebook, because his parents read his messages. I made everything correctly, but when I hit the buttons they don't do anything.
VB
Dim strString As String
Dim strString2 As String
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim strString As String
[code]....
i got 5 treeview with checkboxes when i click button update i need to uncheck all the checkbox i also got a button which can clear all the checkboxes which it uses javascript function to clear i was wondering whether execute update after tat execute clear button automatic? it tat any way to implement this function? here is my java script of clear button which word perfectly
[Code]...
In cell A1 of Sheet2 I have the following text [code]how to I get VB to recognize that the 4<sup>th</sup> character of the string has character code 63?
View 3 RepliesOn my software , i have a function for search in the list a member . The function have more fields : Girls , Boy , Old , etc ... but the software doesn't work correctly. I want him to search with several conditions, adding AND. Here is the code :
Vb
For Each MemberALister As MemberInfo In _Listemember
If Me.Girl.Checked Then
If MemberALister.Nom.Contains(Me.Genre.Text) Then
[Code]....
I am migrating project from .net 3.5 to .net 4.0 and faced the following issue. There are 2 DllImport statements:
<DllImport("hid64.dll")> _
Public Sub GenerateHardwareID( _
<MarshalAs(UnmanagedType.LPArray, SizeParamIndex:=1)> ByVal Buffer As Byte(), _
[Code].....
I'm doing a baseball program for a class project. And I almost have it complete, but it's giving me a syntax error. I can't figure out what i'm doing wrong. I'm using two functions to return a value for different type of baseball tickets to the button that calculates them. Here are the instructions 1.)User selects whether to purchase season tickets or single-game tickets 2.) User enters the number of tickets needed and the type of seats based on whether they selected season single-game tickets.3.) User clicks the Compute Ticket Cost Button to display final cost4.) User clicks the Clear Form button to clear the responseI just can't figure out what I did wrong. I know it's something stupid that i'm doing.the errors are happening inside the btnCompute sub routine. with syntax erros on SingleGameCost() and SeasonalCost() line 114 and 118
Public Class Form1
'Global Variables
Dim intTicketChoice As Integer
[code]...
I have a form that works on my local Machine I created into. I have Office 2007 on this machine. I created the Form with the Excel 12 Reference. I move the Entire conetence of the Project folder to my work computer. Which has Office 2003. Do I need to recreate the form with the Excel 11 reference. I could not get the form to work on work computer. IT has a com error. I am acessing the EXE for the debug folder w/in the Bin Folder.
View 7 RepliesI'm trying to flag a record as deleted by clicking the delete button on my bindingnavigatordeleteitem button.
The code is:
Private Sub BindingNavigatorDeleteItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BindingNavigatorDeleteItem.Click
code:.........
The error is "Deleted row information cannot be accessed through the row"
Private Sub LoadMovieDetails()
Try
Dim cmd As SqlCeCommand
[code].....
Maybe i'm missing something, but how can i make my application to save the value that i use to replace the null values that exist in the database?Let me explain i have a form with several textboxs to let the user enter/edit some data. At the first time the user opens the form, the are some fields in the database that are null, so i use one of the overloaded versions of the control.databindings.add(), and set default values for those fields.
My problem's when the user clicks save without changing any of the default values, i can't detect any changes to the datatable, so the update method doesn't update anything.
I have one simple questionWhat's the code for deleting one row from Database using BindingSource and DataSet? Just like from BindingNavigator.
View 14 RepliesI have a dataset (dS), adapter(aD) and bindingsource(bS) I am using in a form. The datasource for bS is dS, and I am filling the adapter in the form's Load event with a table (tbl) from the dataset.
On the form I have a listbox and a textbox with the following properties set
[Code]...
I am having issue with this function where wait_rtn statement does not work and errors out with error 0. it is suppose to search the screen and if it finds (true) get out of the loop...
[code]...
