I am using VB2010 Express to create a Windows Form.
I have been able to add an event handler to a single textbox to respond to the ".Leave" action.
Now I want to take multiple textboxes and use them as a single control and use the same event handler.
Eg. If TextBox1, TextBox2 and TextBox3 are grouped as a single control nothing would happen in those boxes until focus went to any other control on the form.
AM trying trap specific events for some controls on a form. i tried this, but its not fireing the events
[Code]...
EDIT I found out that am placing the control in multiple controls, on the form is a panel, inside the panel is different groupbox, these group boxes have the controls am trying to trap their events
I have many textbox controls and they are named as txt1.text, txt2.text, txt4.txt etc.I want to raise the event "Leave" when txt1.text leaves or txt2.text leaves.but with a single handler.
View 2 RepliesThe event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm
Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean)
Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
[code]....
I create a dynamic number of PictureBox controls. I keep them inside a List. What I want now is to make them clickable: same event handler for all (opening of the image source file) with a parameter. The question is: how can I do it in practice? How I set the handler Sub for every picbox?
View 3 RepliesI have a piece of code that i want many ListViews to run throughout the app at ItemUpdated. I'm sure the same can apply to many other control-events.How can I hook up a certain listviews ItemUpdated event to a sub in a class module?
here's my class module Public Class ControlParts
Public Shared Sub LSVItemUpdated(ByVal sender As Object, ByVal e As ListViewUpdatedEventArgs)
Dim lsv As ListView = CType(sender, ListView)
lsv.EditIndex = -1
End Sub
End Class
Now if i add OnItemUpdated="LSVItemUpdated" to my ListView's declaration I get an error that 'LSVItemUpdated' is not a member of 'ASP.admin_order_aspx'. Well, I don't want this on the page. I wan't this to be globaly accessible. I could in the code behind call the LSVItemUpdated, but that will beat the whole point off.
How do I add an event Handler to a control, for example a textbox, to handle any keypress event?cause I want this textbox(which is added in program runtime) to only accept any convert any small letter to Upper case.
View 2 RepliesWhen you click on a button control on a web form visual studio automatically put in this code for you in the code behind.
Protected Sub btnSave_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnFlightInfo.Click
end Sub
Say for example, I wanted to call this method from another method. How would I do that? I know that the sender is the actual button object, but what is e? Here is what I have so far inside another sub. Just trying to get a better understanding of how this method works.
btnSave_Click(btnSave, ??what would you put there??)
During the process of my program I am creating several different buttons depending on what file the user selects. I have been able to create these buttons and I would like to set up the event handler so when the user selects one of these buttons it pops up a message box that shows the user the name of the button they just clicked on. The message box isn't the goal of what I would like to do with it but If I could get that to work I would be able to alter the code to get it to work the way I want it to.
Below is my code that I currently have. I don't have the event handler doing anything at this time as I can't seem to get it to work I am still playing around with it.
ublic Sub resizebuttons()
Dim X As Integer = 175
For Each item As String In CSVInput.selected
[Code].....
I'm creating an ASP.NET Custom Control for my web application which is basically an ASP.NET Button control contained inside multiple <div> elements (for styling purposes).How can I create a Click event handler for my custom control so that my control acts as an ASP.NET Button?
Ie.
<cc:Button id="myButton" runat="server" Text="Submit" />
Sub myButton_Click(sender as object, e as EventArgs) Handles myButton.Click
End Sub
Is there any way to catch the textbox control in the datagrid? like catching its keypress event?
View 1 RepliesI am passing some values from a Gridview Update Click event to a popup ASP.net page that dynamically builds a series of textboxes in a Placeholder based on the number of sentences that are found in a specific cell of the Grid Row selected.The boxes that are built represent each sentence found in the cell of the selected row. Each sentence is presented for translation, where user enters data into a 2nd dynamically generated textbox.This all works great.Now I have a Listbox beside the 2nd textbox, which sometimes has 1 or more variables that need to placed into the translated sentence. I have set up a Hover menu over the listbox so that I can select the variable and insert it at the end of the sentence in the 2nd textbox. My problem is generating the click event on the dynamically created Listbox. Something like....
Protected Sub ListBox1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
TextBox1.Text = TextBox1.Text & ListBox1.SelectedValue
[code]....
I am playing around with Drag and Drop, and I am having an issue with AddHandler. I am creating labels and displaying them on a form. Before I add each label to the form, I add 2 event handlers (DragEnter and DragLeave). When I run the code, it hits the first event handler (DragEnter), but doesn't hit the second event handler (DragLeave). Either I have coded something wrong, or the second handler is not being added.
Here is my code (note this is just something Im playing around with for learning):
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code]....
Is there another way to handle the leave event of multiple textboxes other then coding in each event handler? I may not be using correct terms instead of doing this: (Existing)
Private Sub leveladjstvaltxt_Leave(ByVal sender As Object, ByVal e As System.EventArgs) Handles leveladjstvaltxt.Leave
If Me.leveladjstvaltxt.Text <> "" Then
Dim levels As Integer = CInt(Me.leveladjstvaltxt.Text)
Me.leveladjstvaltxt.Text = Format(levels, "#,###")
I have 30 TextBoxes all need same formatting , so I was trying to come up with something like this: (trying)
For Each ctrl As Control In Me.Controls
If TypeOf ctrl Is TextBox And ctrl.Text <> "" Then
Dim val As Double = CDbl(ctrl.Text)
CType(ctrl, TextBox).Text = Format(val, "#,###")
End If
I am stuck though and don't know where I would place that code if this is something that is even possible. Only thing I can currently think of is in the leave event which defeats the purpose, I wanted to avoid having to place the code in 30 different textoxes leave event.
How do I get a Event Handler to fire from within a nother Event Handler?
View 6 RepliesUsing the walkthrough from [URL], I implemented a DatagridView in virtual mode, totally unbound, in VB 10 Express (we are talking WinForms).
I understand that CommitEdit (DataGridViewDataErrorContexts.Commit) commits the current cell's contents to the data cache.
The example uses row-level commit, i.e. it pushes the values into a row buffer until the current row is left. Only then the row is added to (or updated in) the data store. That's exactly what I do, too.
Question -- how can I commit the current row programmatically without leaving it? (I want to commit the whole row, not just the current cell.)
If the user leaves the row, there is a RowValidating, RowValidated, RowEnter event sequence where the datastore update is taken care of. So one idea (currently my only one) was to simply re-set CurrentCell to Nothing, for example.
But I cannot just set the DataGridView's CurrentCell property to Nothing (or any cell outside of the current row) since I want to commit from within an event handler of a custom edit control created by a custom column, and I see an System.InvalidOperationException exception when setting CurrentCell there.
In fact, it is a tiny button right to a combo box, i.e. I create a DataGridViewComboBoxCell descendant which is a DataGridViewComboBoxColumn descendant's edit control. My special ComboBox cell adds a tiny button which should commit the current row. Unfortunately, that button's _Click event handler cannot change CurrentCell since DetachEditingControl throws the exception then.
Obviously, I must delay the CurrentCell re-assignment until the whole _Click event has been processed. Or what? How would I do that -- register a custom Windows message, SendMessage that one to me, and override the windows procedure of the form so it re-sets CurrentCell when this message is received? (Hello?)
There should be a rather easy way to let DataGridView commit all changes by firing the events that I handle to perform the datastore update, no?
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting?I don't want to type those event handler subroutines every time!
View 1 RepliesI've tried following the Microsoft instructions to add multiple Textboxes to my form, but just cannot get it to work.Thus, I've deleted everything I wrote, so I don't have code to post. Is there a very simple way to add multiple TextBoxes to a form and be able to index them? If it's too lengthy, Is there a workaround?
View 6 RepliesThe title pretty much precisely asks the question, but I shall repeat;
When I double click on a form control while in the design view in a Web Application project within Visual Studio 2010, say a 'button' or a 'submit' for example, it inserts a javascript function into my .aspx file. When I do this at work it automatically creates an event handler for the control in the code-behind.How do I change this to that setting? I have used '/resetsettings' already, and other answers to similar questions do not solve my problem. I have reinstalled, gone through every menu I can find (though I may have missed something)I don't want to type those event handler subroutines every time!
remove an event handler from within the event handler?
I have a class that gets data from a hand scanner. When the scan is complete and the data is validated, the class fires a custom "ScanComplete" event and returns the data in a custom EventArgs.
In the calling program, I'm creating an instance of the scanning class and adding a handler for the "ScanComplete" event. In the event handler I get the data that was scanned and then remove the handler.
It seems to be working but it feels wrong to remove the handler while I'm running inside the handler. Will this cause a problem?
I'm trying to complete this airline reservation application, but having a problem in this part of the question:Creat an event handler for the FlightBindingSource's PositionChanged event: select FlightBindingSource in the class Name combobox then select position changed in method name combobox to creat the FlightBindingSource's PositionChanged event handler. Write a code to access the currently displayed flight object and pass its flightNumber to method DisplayPassengers as a decimal.This Is my code so far:
HTML
Public Class AirlineReservationForm
Private database As New ReservationsDataClassesDataContext()
Private Sub FillAll()[code].....
Below I create an array of labels. I would like to add an click event to my labels. Can someone point me in a direction?
[Code]...
I just added a gotfocus and lostfocus handler for all of my textboxes. Below is my routines to call on gotfocus/lostfocus.
[Code]...
Now, my issue is that this works great if you use the mouse and click around in the textboxes. However, if you hit the TAB key to move around on the screen, the LostFocus event doesn't seem to work. All of my textboxes backcolor remains lightblue. What did I do wrong? What do I need to do to fix this problem?
When I utilize AddHandler in VB to add my own method to the Click event :
AddHandler Button.Click, AddressOf myButton_Click
I see that my code executes last - after other event handlers for the Button_Click event. Is there a way to insert my event handler in front of other events so that it executes first?
On my form, i've got some textboxes and some richtextboxes. I'm using the following code, to search through the text properties of each of the two types of control. see below:-
For Each ctl As Control In Me.Controls
If ctl.Text = "7777" Then
ctl.Text = "found the sevens"
End If
Next
What i'd like to do is isolate the textboxes only, is there a way to do that? I tried this but i got an error:-
For Each box As TextBox In Me.Controls
If box.Text = "7777" Then
box.Text = "Found"
End If
Next
Is it possible to determine using VB.NET whether a certain event has any handlers attached to it? I don't own the event, in this particular case I want to know which of the items in a Windows.Forms.MenuStrip have their ToolstripMenuItem.Click event handled.
View 1 RepliesI've been looking for a solution to this for several hours now and cannot find a solution.
The Scenario:I have a masterpage baseclass (called basemaster)All of my master pages inherit from basemaster
basemaster defines an event 'Public Event HandleClickEvent As EventHandler'I have a masterpage named master1
master1 defines an event handler 'Public Shadows Event HandleClickEvent As EventHandler'master1 has a user control named usr1 usr1 has a button that raises event ButtonClicked when clicked I have a page (thePage) that uses master1 thePage has a button click event handler that it registers like so: 'AddHandler Master.HandleClickEvent, AddressOf HandleTheClick' master1 has code something like:
Protected Sub Usr1_ButtonClicked(ByVal sender As Object, ByVal e As System.EventArgs) Handles Usr1.ButtonClicked RaiseEvent HandleClickEvent(sender, e) End Sub when thePage loads I see it register the handler on master1 when the button is clicked, Usr1_ButtonClicked is fired and I step through the RaiseEvent but HandleClickEvent on thePage is never reached.
This code is part of AjaxControlToolkitSampleSite. To be exact, it is in the AsyncFileUpload control[code]...
View 4 Replieshow to add one event handler name clearallboxes that handles the TextChanged event for both examples(Customer text box and Total text box ) This event handler should clear the values in the text boxes that display the results.
View 4 Repliesi have a page which dynanically create a link when it load, after i click on the link it should loop in the database fetch all the record and display another set of link , then when i click on these link it should give me all information about this particular record it like this one
Q: when the page loads, it creates the first link which is associated with an event handler, it fire the first event handler (Getname) but it not firing the second event handler (GetnameDetails)
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If ViewState.Item("nameload") IsNot Nothing Then
If ViewState.Item("nameload").ToString = "True" Then
[Code]....