In almost every website their is Career option and their is and E-mail Id provided for us to send resume. if we click on that email id their is a popup of email box. [code] i want the same to be happen in my project how can i popup the window which wll contain the Email Id provided by us in.
View 1 RepliesI am unable to popup msgbox if count=0. It will work only if i use MsgBox(""). I am unable to understand how it has anything to do with msgbox("")
Private Sub txtstaffID_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtstaffID.TextChanged
Dim conn As SqlClient.SqlConnection
[CODE]...
Both IF and Elseif code executes but the problem is the msgbox won't popup in both the cases( i.e when IF executes and when Elseif executes) unless and untill i have a msgbox("") before da.Fill(dt)
I want to make a msgbox popup at a certain like 1:52pm. I have tried but can't seem to find out how to do it
View 2 RepliesIf you open up a PDF file and select File > SaveACopy you'll see the Adobe acrobat SaveAs dialog that I'm working with. Typically I'm dealing with it when the PDF is showing in Internet Explorer (I'm automating PDF downloads by controlling the File > SaveAs option).
If the destination file already exists, the dialog will popup a tiny messagebox asking if I want to replace the existing file Yes or No. It is this popup that I'm trying to close, but I can't seem to find it. When I run enumWindows to get all the top level windows, it doesn't show up. That's probably because I can see, in Spy++, that it has a parent window (the Adobe SaveAs dialog box). So i tried running EnumChildWindows to get all the child windows of the Adobe SaveAs dialog - but the popup doesn't show up on this list either (I know this because I did a WM_GettText on each child window and nothing matched the tiny popup).
I'm not sure if FindWindow would do it - but i'm leery of that because, at least on my home computer, both the popup and the Adobe SaveAs window have the same title text, namely "SAVE AS" so i'm not sure which one it would find - in fact I seem to recall I tried that already.
I've set up a listbox on my program so that a user opens a folder browser dialog, the name of that folder is then added on a listbox as that folders name, now what I am wanting to do with the listbox is, if an Item is selected then a button is pushed a msgbox pops up with the item they selected.
View 4 RepliesThis should be pretty easy, I've been experimenting, just can't seem to figure it out. I'm trying to make a MsgBox popup with the text that is in Textbox1 and Textbox2. I want the MsgBox to display both values...
View 3 Repliesim trying to make a popup blocker type message box that pops up when a popup tries to load a page, and it asks The page [URL]is trying to open,open in a new tab?
(label)
No (button) Yes (button)
how would i make a menu appear when i click somwhere on the page,how would i make it recognise a picture, and be able to copy it to a location on the local drive?
I'm trying to use the WebKit-component ([URL]) in VB with the help of Visual Studio 2008. This is running without problems, except for two following two issues:
1. Hints/Tooltips are not shown (e.g. as there usually will appear one if you stay with the mouse over the Google-logo)
2. If there's a popup-window, I don't know how to get the new desired URL.
[Code]...
if its possible to have a msgbox cleared without having the user do it manually? what would be my best option here?
View 8 RepliesI'm working with a Silverlight Popup control (SL4). I would like to update data shown on that popup every time the user opens it (IsOpen=true) by passing a string and calling a Private method located in the Popup control behind code to fetch updated data.
I was hoping to place code to make this happen in the Opened event of the Popup, but such an event does not seem to exist (even though I found some documentation on it).
I have a usercontrol that has a popup that displays another usercontrol when the user selects an item from a listbox. When the parent initializes, all the usercontrols initialize.
<Popup x:Name="PopContactLogs" Width="670" StaysOpen="True" AllowsTransparency="True" PopupAnimation="Fade" PlacementTarget="{Binding ElementName=PageCustomerHome}" Placement="Center">
[Code]....
and it just keeps the original data in there. I'd really like to just reinitalize it every time and basically have a new webpart each time.
If NewEntryName.Text = "" And OpenFileDialog1.FileName = Nothing Then MsgBox("Please choose a name for your game.", vbExclamation) MsgBox("Please find your game.", vbExclamation) Else Button1.Text = NewEntryName.Text game1 = True Panel1.Visible = False End If
I want it to show the first MsgBox if the NewEntryName.text = "" and I want it to show the second MsgBox if openfiledialog1 = nothing... how do I do it?
I am sending an email with an attachment using the following Code
Dim msg As New System.Net.Mail.MailMessage(req.EmailFrom, req.EmailTo)
Dim att As New System.Net.Mail.Attachment("C:Documents and SettingsmichaelrDesktop1216259.pdf")
With msg
.Attachments.Add(att)
[code]....
The file size of the attachment is 396KB, upon the recipient receiving the email outlook shows the file size as 543Kb. Strange thing is if I send an email with the same attachment using outlook the file size is 396Kb.I understand that file sizes can increase due to the attachment being base 64 encoded as opposed to just raw binary.What I am failing to see is why outlook send a file which is 396KB in size but in code when sending it, the same file is 543Kb.
how would i implement a way that i would not hard code the email message that the application send to email recipients? how will i also include email message formatting (text in bold, italic, etc.)?
View 2 RepliesI'm trying to get my program to send very simple text email messages. I did do a search beforehand, and found that I was having the same issue as someone else, but the specific question I have was not answered --
I've learned that if you're trying to send mail, you need an SMTP server... I found this list here but every one of them I've tried yields the same "Failure sending mail" error.
Here's my
Dim mail As New MailMessage()
mail.From = New MailAddress("me@mycompany.com")
mail.To.Add("destination-email@whatever.com")
[CODE]...
Is the problem that I need to show "credentials" (i.e. user/pass)? If so, what would those credentials be? Can I use my yahoo email SMTP server with my login info to do it? And is this all I'd need to add to add the credentials?
smtp.Credentials = New NetworkCredential("MyUsername", "MyPassword")
(before the smtp.Send, of course)
A client for our company contains an apostrophe in their email name joe's@joe.com. I was advised that this is the correct and current email for the given client. Below is the Expression string I am using with Regex (which I copied from the internet somewhere) to validate email addresses. How can this expression be modified to allow/accept apostrohe's?
strRegex =
"^([a-zA-Z0-9_-.]+)@(([[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}.)|(([a-zA-Z0-9-]+.)+))([a-zA-Z]{2,4}|[0-9]{1,3})(]?)$"
I have to make a basic program that: Create a program with a simple interface that
1. Asks the user type his/her email address into a textbox.
2. When the user clicks the "Evaluate Email Address" button, one of two message boxes pops up: "That is a valid email address!" with an "Information" icon, or "That is an invalid email address!" and on a second line, "Please retype your email address.", with an "Exclamation" icon
3. To be considered valid, the email address must -include an "@" symbol, and -it must end in either ".com", ".net", or ".org" or ".edu" (I don't know how to check a string and test if its last four characters end with any of these and make it say not valid email address. I think I might have to use a case statement)
I'm using the Chilkat add-on to read email from a pop3 server. I can download the headers fine but the headers all download into one column.How can I get my email to put the headers in the appropriate columns?
'Display the From email address and the subject.
ListView2.Items.Add(email.From)
ListView2.Refresh()
ListView2.Items.Add(email.EmailDate)
ListView2.Refresh()
[Code]...
What I am trying to do is to download the "From" person into the "From" columns and the "Date" of the email into the date column, so on and so forth but I'm not able to get them to go into their separate columns.
I am buidling an application that users can use to submit text data and attachments to email recipients. Certain fields, quite a few in fact from the textboxes in the app will be in the email body, and some in the subject line.This is how I am doing it right now, but I figured there has to be a better way. In VB it is one single line of code, not many like it is here. Ideally I would like to be able to better control the positioning in the message body.
mail.Body = String.Concat(Label1.Text, " ", TextBox1.Text, " ", Label2.Text, " ", TextBox3.Text, " ", Label5.Text, " ", DateTimePicker1.Text, " ", Label3.Text, " ", TextBox2.Text, " ", Label6.Text, " ", RichTextBox1.Text, " ", Label7, " ", RichTextBox2.Text)
I wouuld like to open outlook with new email with provided subject line, body message and attachment but no email address. User will enter the email address and click send . How can I do this?
I used following code but it gives me error for to address
Dim SmtpServer
As
New SmtpClient()
[Code]....
I am creating an application in ASP.Net 2.0, the user can choose the service that he want and submit the request after choosing the form and filling the needed details the user should click on the submit button, then two emails should be sent; a confirmation email to the user him/herself and a notification email to his/her direct manager to get the approval on the requested ticket.How can I send the emails using VB language?
View 9 RepliesHere is the problem, I have an Access form and a textbox for an e-mail address. The email address is not required, I only want to check for a valid email address when a value or address has been entered into the e-mail filed. Example: If e-mail is not empty or if email field has a value, then check for the follow elements, matched the email address with the required format. If the e-mail field is empty, do not look for anything, move on.
View 1 RepliesI am development a small app for auto response all new emails with custom responses. My problem is that I don't know how open the email (make click on the subject link) on gmail. I am using web browser control, so I need to know how make click on the email titles for open each emails.
View 3 RepliesWhat I would like to do is create a command button that launches an email from outlook attaching the current word document to a set email address. I'm not fussed if the word document is saved or not as it is only the email receipent that needs it, likewise I don't mind if the code instructs the email to send of just opens it ready to be sent.I have read through loads of forums and tried loads of codes but cannot get any to work.
View 3 RepliesI've followed the instructions from this article http:[url]..... . My only problem is It compiles fine but no email arrives. I have a feeling it's for obvious reasons which escape me. This is my aspx.vb page.
Imports System.Web.Mail
Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click
Const ToAddress As String = "paul.ramirez@att.net"[code]....
im using vb8.net im struggling to make a program that will display email addresses so in other words if im using ms outlook then by the click of the button the program must go in to the windows registry and then look in the place where the email address is and then read that part and display the address in a text box.
View 8 Repliesi can send email through vb.net behind code but how do i implement so that the recipient cannot see the sender email and only the name?i had done alot of research but i can't find any solution about this problem
[Code]...
How Can I EMail RichTextBox Contents By Default Email Client Using vb.net?
View 1 RepliesI am sending an email using VS2010 VB which works fine, except I would like to have the recipient see their name in lieu of their email address upon receiving the email. I've tried different 'To' addresses, ([URL]), but nothing seems to work. It always shows the email address when received.
View 2 RepliesI have a grid view control in my application.
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="CPUserID" DataSourceID="GetSelectDelegatesDataSource">
<Columns>
[code]....
And I have a image button
<asp:ImageButton ID="ibtnSendInvites" Visible="false" runat="server" ImageUrl="~/images1/send_button.png" />
If you see above code you can find that there is check box functionality in my gridview. I have email address boundfield in my gridview. I want to send an email to the email addresses which are been checked in gridview.