I am trying to reference a DataTable and I do not know how to achieve this. I would like to assign dtTmp to dtTarget(i) through the reference dtCurr. Is it possible to achieve that in VB.NET?Private dtA, dtB As DataTable
Dim dtTarget() As DataTable = {Me.dtA, Me.dtB}
For i As Integer = 0 To dtTarget.Length - 1
dtTmp = New DataTable()
'Do something to dtTmp
assign the new table to the reference
dtTarget(i) = dtTmp
I am finding difficulties to convert a datatable to a new datatable using a reference datatable. My question is confusing and I am not good at explaining things so I drew a picture (see below).I have two datatables on memory and I need to create the third datatable using the second mapping table for reference. The column names are just for example and it can't be hardcoded.
View 2 RepliesI am using VB.NET and ADO 4.0. Given that I have a string containing a reference to a table.column, can I use the content of the string in a command? [code] I got to the point where I can use the string contents as "reference", it seemed to obvious but [strName] does the trick, partially.When I debug bookableday.room1 remains 0 whilst it should show 6. There might be a conversion issue because the debugger shows me "6" i.s.o. 6 . this is the actual code: [code]
View 1 RepliesWhen I query a DataTable using LINQ, are the rows returned as references? Either way, is it possible to control this behaviour, so that rows are either returned as references or as new rows?My guess is that all objects are returned as references by default, since that seems to be the normal behaviour in most programming languages.
View 2 RepliesI am receiving this error: Reference to a non-shared member requires an object reference on the code I've
bolded within the code body. Here is my code:
[Code]...
I get this error:Reference to a non-shared member requires an object reference.When i compile on the following code section:
Private Sub statusBarToolStripMenuItem_Click(ByVal sender As Object, ByVal e As EventArgs)
ToolStripMenuItem.Checked = Not ToolStripMenuItem.Checked
statusStrip1.Visible = ToolStripMenuItem.Checked
when I do something like this: Process.Start [URL] it says that error only on Form2 not Form1.
View 2 RepliesError 'Reference to a non-shared member requires an object reference'?I want to know what a non-shared member is.
View 2 RepliesI am opening frmB (variable for FormB - the actual form) from frmA. From btn1 I open frmB like this:
frmB = New FormB()
frmB.Show()
From btn2 (frmB is already open) I bring frmB to the front from behind frmA:
FormB.Show()
FormB.BringToFront().
No problem so far. Now I need to pass an arg to frmB. This is where I am having the problem.
from btn1 (in frmA) I do this:
frmB = New FormB(myArg) '--pass myArg to constructor of FormB -- no problem here
frmB.Show()
then from btn2 -- this is where I have the problem
FormB.Show()
FormB.BringToFront()
I tried placing myArg in FormB.Show(myArg) but that did not fix the problem. What is the correct way to pass myArg to FormB (frmB) in this scenario? Do I need to share FormB or frmB? How do I do this? "frmB" is frmA level variable.
why i am getting an "reference to a non-shared member requires an object reference" error on format.Yesterday gets the previous days date and presents it in a yyyyMMdd format.vsettlementDates takes the "Yesterday value and requests data from it.
Dim Yesterday As String = format(Today.AddDays(-1), "yyyyMMdd")
Dim vSettlementDates As String = (Yesterday)
I am getting the following error:
Error 1 Reference to a non-shared member requires an object reference. (on WindowsIdentity.Groups)
Here's my code from that uses the WindowsIdentity.Groups property to display the identity references for the groups the current user belongs to. This code is part of a larger example provided for the WindowsIdentity class.
Public ReadOnly Property Groups As IdentityReferenceCollection
Get
Dim irc As IdentityReferenceCollection
[Code].....
" GridView1.datasource = _MyUsers.Reference to a non-shared member requires an object reference." error. WHat's wrong with this code
<%@ Page Language="VB" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]......
I have the following code below, how the line where it says : For Each c As councillor In councillorList i get the error: reference to a non shared member requires an object reference. Can someone please advise where i am going wrong? [Code]
View 2 RepliesAlright, so im getting this error:Reference to a non-shared member requires an object reference.This is the bit of code the error is pointing to:My.Settings.Bookmarks.Add(WebBrowser.Url.ToString)Why is it giving me this error?Its saying WebBrowser.Url is the problem.
View 1 Repliesim sure it is something really simple. Im by no means comfortable with VB. The below code is not mine but i have altered it for my needs. However im getting a couple of errors.
Reference to a non-shared member requires an object reference. I have underlined the errors in the code and they all refer to the above description
[Code]...
Im trying to create a login page which accesses a mysql database I keep getting this error: reference to a non shared member requires an object reference
[Code]...
Can I reference a dll programatically in VB.net? Or change the Local Copy path for a dll reference?
View 1 RepliesHow do I fix the following error: Error 1: "Reference to a non-shared member requires an object reference."
On Line:
shortCut = CType(WshShell.CreateShortcut(creationDir & "" & shortcutName &
".lnk"), IWshRuntimeLibrary.IWshShortcut)
Here's my full code sample (if needed for context):
[Code]...
I am getting the following error when I call another form from Form1 and fill out the text boxes and Press Ok button. For some reason I cannot access the datatable (dt) from Form1. It gives me the following error: Reference to a non-shared member requires an object reference
[Code]...
what is the matter with this
Public Sub showdataset()
For Each dt As DataTable In dsEvents.Tables
Response.Write("<table border='1'>" & vbCrLf)
[code].....
[Code]...
I am using this exact code on another form in the same project without an issue, just with a different data source. Any ideas?
EDIT: Never mind, seems like it was a stupid naming scheme and VS was adding a bindingsource with a different name than I wanted.
I have two forms form one have one listbox and one checkedlistbox and form2 have only checkedlistbox
on form one checkedlistbox is being updated by listbox_SelectedIndexChanged.
how can update checkedlistbox on form 2 when listbox_SelectedIndexChanged on form1
when i use form2.checkedlistbox.BeingUpdate()
I am getting this error for Login.Show() here:
Imports Microsoft.VisualBasic.FileIO.FileSystem
Public Class Update
Public Sub CheckUpdate()
[code]....
I am also getting this is every other form when using the Login form, along with Login.Close(), and Login.Hide(). I haven't tested any other ones.
I am trying to display value of the field ("UserID") for every row exists in datatable to checkboxlist(make the checkboxlist item selected).
I used for loop, but only the field value from last row of RoleUsers table is selected in the checkboxlist.
Here is my code
Private Sub DisplayRoleUser()
Dim conn As SqlConnection
Dim cmd As SqlCommand
[Code].....
I have a datatable and I apply a filter to the defaultview.rowfilter property of that datatable. If I then loop through the rows collection of the datatable, will I only be able to see those rows that the filter applies to, or will it loop through all the rows?
View 6 RepliesI am working on a project that takes an xml schema and xml data files and places them into a DataTable, the 2 files are generated from a working table that i have written to disk. I wish to load these 2 files into a DataTable. Here is What i have
vb.net
Friend Function CreateTable(ByVal tableName As String) As Boolean
Dim table As New DataTable(tableName)
table.ReadXmlSchema(tableName & ".xsd")
[code]....
this however produces the following error on line 3
Quote:
System.ArgumentException was unhandled Message=DataTable 'get_item_list' does not match to any DataTable in source.
get_item_list is the parameter passed into this function (tableName)
I have a datagridview bound to a datatable setting its datasource property to the datatable. I would like to have a child form that contains a list of columns associated with the datatable that contains a checkbox that will allow the user to hide and show the columns ( I do not know the best control to use here) (I assume this is the easy part as All i need to do is loop through each of the datatable's columns to get the column name)
now I would like save these visible columns on some event like form_closing so that the next time the user opens the form up it will remember the settings
I came across a problem with using a BindingSource as my DataGridViews.DataSource. Whenever I applied a filter to a column in the BindingSource and the user makes changes that don't match the column filter the DataGridViewRows would automatically disappear. A similar thing would happen when applying a Sort to a column. If the user made any changes the DridGirdViewRows would automatically sort causing rows to be moved around. This was not ideal for my application and there isn't anyway to stop this from happening with the BindingSource.
To correct this issue I have to use subsets of data. I use a DataView to apply the filter and sort to the main DataTable, which creates the subset DataTable.The problem is when I use the DataView.ToTable method I loose the Primary Key and RowError information. So I have to reapply this information everytime the user filters or sorts the DataGridView.Is there a better way to get a subset DataTable?[code]...
I have a datatable that has a resource in one field and hours used in another, it looks like this -
Resource Hours Used
Manager 1
Accountant 1
Field Staff 2
Accountant 3
Manager 4
Manager 1
Administrator 6
Field Staff 4
Manager 0.5
Administrator 1
What I want to do is be able to create a summary of the data table above that groups multiple occurrences of a resource and adds up the hours used for that resource, creating a summary that looks like this -
Resource Hours Used
Manager 6.5
Accountant 4
Field Staff 6
Administrator 7
I have added one class under namespace BusinessLogics. I have inherited System.Web.UI.Page to class and showing error as 'end expected' in
System.Web.UI.Page
Namespace BusinessLogics
Public Class BllUploadImages Inherits System.Web.UI.Page
End Class
End Namespace
How can i remove my error.