I need to include an excel file in the installation project of an application. I've added it to the install project under application folder. I need to read that file into a dataset during runtime. The file needs to be included on install so that the customer can change the file as needed.
View 9 RepliesI have an excel-file that is being populated with certain information and is used as a base for a printing form...
I need to include that file in the installation and reference to it when populating the cells with some information. So, how do I include that file when installing the project?
( I tried already to change the 'Build Action' to 'Content' )
I would like to be able to include the folders "Bible" and it's subfolders into the install folder of the host machine. How do I do that? Also, how do I determine the install folders? I would like them to be: C:Program FilesGarman Softwareetc
View 7 Repliesim using vb.net 2008 not vs, i try to include a cs file but there a no include in project explorer, so i use add existing item.but this cs file should generate a component in toolbar, but it wont, is there any other way to load it to my vb.net project?
code in *.cs file
using System;
using System.Text;
using System.Drawing;
using System.Drawing.Text;
using System.Drawing.Drawing2D;
[Code]...
how to include a Resource File into a project, and how to put image files into it for use in my program.
View 2 RepliesI have written a small VB.NET simulation program that uses an XML file to configure the simulation. I want to include this file in the project build so that when the application is installed, there will be a default XML file in the required directory.
When I do the Project Publish (within VB 2010 Express), there is no option for including any extra data files in the process.
Is it possible to do this with VB 2010 Express ... or should I try some other project builder/installer.
i need to register the control in client machine at installation time.i craeted a bat file which has the following code regsvr32 s mscomm32.ocx.how to include bat file in setup project. and how to make it to run first when installation starts
View 2 RepliesI'm trying to include a few text files in my project. These files are read and used to make decisions in the program. Ordinarily, I would just set the file path and open the file via StreamReader, no problem. However, this application now needs to work on other computers and I want to include the text files in the application directory. I've researched two ways to do this:
1) Include the files as resources and reference them via my.resources.
I've gotten this to work ok, except the files are opened as strings upon starting the application. They are fairly large files, which I imagine is taking a lot of unnecessary memory. Also, StreamReader wont work with these files as resources,
or at least I can't figure out how to. My application is already based around using StreamReader so I don't really want to change this.
2) Include the files as additional items. I know how to do this too, but I can't reference the files programmatically.
Can I use a resource text file via StreamReader or how would I reference the files if they're included in my project directory?
I am new to VB and Visual Studio. Using VB 2010 express edition. I am making a VB project and from from inside that i want to be able to run a batch file that i already have.
My problem is i am not able to import this in my project. I tried adding it in the project from solution explorer but when i run the program its not able to find it. I am able to execute it when i copy that batch file somewhere on disk and then giving absolute path but not by including it inside my project.
I do one project in visual basic 2010.In visual basic 6 project can be make Package and deployment (setup file or install file) file using Package and deployment wizard.But in visual basic 2010 express edition does not have Package and deployment wizard.how to make Package and deployment (setup file or install file) file in visual basic 2010 project?
View 4 RepliesMy program needs to read data from a few Excel files that my company has made, basically a database I guess. Is there a way I can put the actual Excel files into my program so that the user doesn't have to supply them? Or perhaps there's an easy way to turn the Excel file into a database?
View 1 RepliesI would like to be able to have my users open an Excel file and include their add-ins they have installed and usually show up when Excel normally starts. Using this code, Excel opens with no add-ins visible:
vb.net Dim excel As Microsoft.Office.Interop.Excel.Application
Dim wb As Microsoft.Office.Interop.Excel.Workbook
Try excel = New Microsoft.Office.Interop.Excel.Application
wb = excel.Workbooks.Open(filelocation & "checks.xls")
excel.Visible = True
[Code]...
Is there a property to allow add-ins when opening an Excel file?
I have a project that I have created, it something like a contact database.It is complete with its own sql server database, and controls and forms.I kinda of understand that I can include this project into another project.This is the tricky part,Can I include my contact project into another project and add more items to the database and forms in a new project?What I'm after is like using classes.My contact database would be like the base class, and the new project would be adding more features to that project.
View 10 RepliesI have a simple vb.net project that outputs a dll. In order to build this project, I have to reference some 3 3rd party dlls by manually adding them to the project and then building.
What I want to do now is auto build this using a app called CruiseControl. . . I have been told that in order to use the 3 3rd party dlls, I have to modify the .proj file to include the .dlls. The thing is, where in the proj file do I include this
and how do I do this? I think I may know where the section is and I have included it here:
[code...]
When I run the auto build program it fails (it runs through but fails at compile time); when I build this manually it works when i refer the dlls. What am I missing to make this work?
I have a VB.NET Windows Form application which uses DAO, no plans to upgrade it to ADO.NET. Created a Deployment Project to generate the installation.
Tried to install on a clean Windows XP SP1 computer: it worked right away (it installed .NET Framework first, rebooted and resumed my application setup).
Then... as it always happens, the CD goes to the user and... error! After checking everything, I discovered the user didn't have DAO360.DLL registered in his machine.
Is there anyway I can check/fix it during installation? DAO360.DLL is already in the Detected Dependencies of my deployment project, but it was not registered in user's computer. Like in my own installation test (clean Windows XP SP1 computer), registering this DLL may not be necessary. In other cases (like in this user's computer) might be needed.
How can I make sure DAO 3.6 is working in user's computer?
I tried to have Microsoft Data Access Components as prerequisite, but it doesn't appear on the list.
PS: This is an application that should run on computer with .NET Framekwork 2.0 - this was my only requisite... then I was surprised by this DAO problem but I don't think I should listen it as a prerequisite (might be too technical for the user).
I have created a setup project for my application and was wondering how I include the .net framework 2 install file?
View 8 Replies My program I wrote is using Outlook 12.0 lib for Outlook 2007. I have referenced this in the project. This exe will only be installed on computers that has Outlook 2007 on it. So with this being the case, do I need to bother including any of the lib files? Or just my exe?I have this in my form:
Imports Microsoft.Office.Interop
Imports System.Reflection
Imports System.IO
Imports System.Text
[code]....
So I assume the Interop is all part of the object lib? I know this sounds crazy but I tried coding it using late-binding with many examples but just had too many problems. So I'm going to make three different exe's for versions 2003, 2007 and 2010.
I am using VS .net 2003 and developing a program that calls Excel. The development computer only has Excel 2003, and the target machine only has Excel 2007. Would it be possible to install Excel 12 Object Library in the development computer without installing Excel 2007?
View 4 RepliesI just want to ask whether I can automate Excel without microsoft office excel installed on machine, I tried but it failed to do automation, does anybody know how to do it without excel installed on machine?
View 5 RepliesI have built a movie database, and a search and insert etc queries, now when the program asked if I want to move the database to the project dir, I accepted. - but now that I'm finished, I compiled it, and tried it on another comp but it doesn't let me install, due to not having the database, is there a way to go round this? how can I include the database in my project?
View 6 RepliesI have a project that i have created in Visual Studio express and SQL server express. i want to create an install file so that i can send to others to install. Currently it is requiring the user to install SQL server Express and 3.5 .net framework.what steps can i take to stop the user having to install these 2 so that it is a simple install for them.
View 2 Repliesi would like to ask that is there anyway to embedded an excel file into a vb.net project? i know the way to read an excel file from vb.net, but i would wanna know is there anyway i can include the excel file inside the vb.net program. This means i dun need another excel file beside the exe file.
View 3 RepliesI built a program in visual studio 2005 that access a Microsoft Access database. I need this program to be a standalone program on many machines. To do this, I need to install a copy of the database when the program installs. I tried including it in the application files part of the build, but the problem I am having is the connection strings dont update with the install. It still tries to point to the folder it is in on the comnputer i built the program.
View 11 Repliesinclude sql enterprise in setup project?how to include sql enterprise when it's not appear in prerequisites of the setup projectand if it's not possible do i have install the full enterprise edition on the client machine?i use visual studio 2010 and sql enterprise 2008.i'm a database beginner and i always used to use sql express edition but now data base getting grow fast and the limitations of the sql express for 4gb make
View 1 RepliesI have created a program using VS2008 with Windows 7. The font I have used is Segoe Marker. This looks great when I develop it but when installed on another machine that does not have this font looks pretty awful.How do I include the Segoe Marker font in my project so that whatever machine it is installed on it will show as it is when I developed it.
View 1 RepliesHow to include Dependencies in my project made in Visual Basic 2010.
View 6 Replieshow i can include files like : .exe .rar .zip .7z in my project and how to make when i push some button for example to download the selected file.
I will give example: I have put alot files in the project and now the test will be with "Test.exe"In my Form1 i got 1 textbox and 1 button and 1 checkbox (or radiobutton)In the textbox is putted the name of the file "Test.exe" and after him has 1 radiobutton for checking that i selected this one to download to the computer and when i press the button to download the file in a popup displayed form (to display new form with the compression progcess - how much percentes is downloaded).
I have no knowledge whatsoever in any kind of API available for VB.net (besides this one, which I already tried and it did not work).The Interface of this project is going to be quite simple:Percentage BarCurrent Download Speed Available SeedsTime Remaining to Finish Open Torrent File DialogueThe only thing I'm missing is a way to include bittorrent protocols into a VB.NET project, after that i will be successful on my own (I hope ).
View 2 RepliesI'm using vb.net 2008 - Ms excel 2007
I'm trying to export data from my project to excel file called ta1 in "C" hard
The first code to open the file and print data to it. it worked with me very well
The second code is to print the data when the file it opened. It didn't work with me
First Code-Work very well
Dim exl As New Excel.Application
Dim exlWorkSheet As Excel.Worksheet
[Code]....
How can i create the project setup and include the database itself..
View 7 Replies