Keep The Rows Ordering Of Datatable Unchanged?
Jul 6, 2010I have the following datatable with the ordering of DataClassIndex column before editting:
DataclassIndex
0
1
[code].....
ADVERTISEMENT
VS 2008 Datatable Unchanged After Change
May 28, 2010I have a datagridview bound to a datatable via a dataview. The user is allowed to edit cells in the datagridview, thereby editing cells in the datatable. I recently found that if the user editted a cell, then closed the form without ever clicking on a different cell (thereby causing the current cell to commit), the change was vanishing because the editted contents of the cell were not being saved back to the datatable.
This was only happening if the user closed the form. Clicking on any other control on the form also caused the cell changes to commit. After rooting abut in the DGV properties, it appeared that all I needed to do is add the following code to the Form Closing event handler:
If Me.dgvCurrentRedds.IsCurrentCellDirty Then
Me.dgvCurrentRedds.CommitEdit(DataGridViewDataErrorContexts.Commit)
End If
Sure enough, this caused the change to be registered in the underlying datatable. However, it was then getting obliterated by a different process, so I went looking for the source of that problem, and eventually tracked it down to this:
While the preceding code is causing the datatable to receive the new information, the datarow that has been changed still has the status Unchanged, even though it should have the status Modified since it actually has been modified. The fact that it appears unchanged causes some other code to obliterate the change, but that's irrelevant.
The question is, why is the row status UnChanged when it certainly has been Changed, and is there any sound way to force the row status to update?
VS 2008 DataTable.Merge(AnotherDataTable) - RowState Remains Unchanged?
May 25, 2009I want to compare differences between two tables in my database with identical schemas.
vb.net
DataTable1.Merge(DataTable2)
Dim changedRows As DataTable = DataTable1.GetChanges
'changedRows is always Nothing. Why???
The DataTable1 is updated with rows from DataTable2 correctly. i.e. missing rows are added and datarows that don't match are updated. But the RowState of each row is still unchanged. I need to have the rowstate (added/modified/deleted) so that I can update the database table.
Ordering A Datatable According To Two Columns
Jun 10, 2011I have a Datatable- table1 and i want to sort/order this datatable in ascending order depending on 2 columns-column0,column1 of table1. how can i do that?
View 2 RepliesOrdering A Datatable According To Two Columns?
Aug 9, 2011I have a Datatable- table1 and i want to sort/order this datatable in ascending order depending on 2 columns-column0 ,column1 of table1.how can i do that?
View 2 RepliesOrdering Excel Rows By Particular Column Programatically?
Jan 25, 2012I am trying to order 7 rows in descending order of data from a particular column.
The data in the excel spreadsheet looks like this:
Name---Actual----Budget---Budget%
Name1--$2000-----$5000--------40%
Name2--$5000-----$4000-------110%
I want to order the rows by the 'Budget%' column in descending order.
The Code I have so far is:
Dim objExcel As New Excel.Application
Dim objWorkbook As Excel.Workbook
Dim objSheet As Excel.Worksheet
objExcel.WindowState = Excel.XlWindowState.xlMinimized
objExcel.Visible = False
[Code]...
VS 2010 : Combine Similar Rows In A Datatable (the Rows Only Differ By One Column)?
May 8, 2012I have three sub tables that I want to process. For each I want to combine the rows, as they are only different by contents in the second column(I want to do the same to the fourth column, later):
'Sub table 1
xx|C201 |02300877 |Samsung |....
xx|C201 |02300877 |Toshiba |....
xx|C213 |02300877 |Samsung
[code]....
p.s. For the fourth column, Manufacturer information , I want to do the same and I'd probably get something like this for the final table:
xx| C201,C213,C606,C619 |02300877 | Samsung
xx| C201,C213,C606,C619 |02300877 | Toshiba
xx| C303, C305,C712 |02301163
xx| C207, C209, C708 |02301165
Add Rows To A DataTable Without Losing The Previous Rows?
Apr 14, 2012Dim _tableBackLogs As System.Data.DataTable
Do While i - 2 > 0
_tableBackLogs = Global.DataAccess.GetDataTable("SELECT SubjectID,SubjectName,Grade FROM SubjectPI WHERE RegNo='" & CInt(HttpContext.Current.Session("userName")) & "' AND Status='Fail' AND Semester='" & i - 2 & "'")
i = i - 2
Doing this replaces the previous data in the DataTable. I want to retain the previous data i.e i want the new rows to be added to the DataTable w/o replacing the previous rows.
DGV Rows To Datatable?
May 29, 2009I have a DGV that has a datasource to load the rows I need for display.
Now, I need to save the selected rows to a DataTable.
binding the DGV. I created the DataTable in my DataSet dsProfiles1 and created a BindingSource - bsDataTableDGV
DataTable:
ClientID Int32 not null PK
ClientName String not null
ProgramNo Int32 Not Null
[Code].....
How To Add New Rows Into DataTable
Feb 15, 2012I have a form with a textbox and a add button. User can write a name down on the textbox and click add button. it will save in a datatable with auto ID. After that, the textbox is cleared and the user can write another name on the text box and click the button. This should add to the existing datatable on memory with existing ID + 1. Show on the gridview. (this is just for display purpose to confirm it works)
I have a datatable like this.
Button1.click() event
Dim name = txtname.Text
Dim dt As New DataTable
dt.Columns.Add("ID", GetType(Integer))
[Code] .....
At the moment I have sometime like the code above. in the real program, it is not just name and it is not just one datatable so i just mock up some code. And this code for aspx.
<asp:TextBox ID="txtname" runat="server">
</asp:TextBox><asp:Button ID="Button1" runat="server" Text="Button" />
<asp:GridView ID="GridView1" runat="server">
</asp:GridView>
.net - Flip Two Rows Of A Datatable?
Jan 14, 2011I Have a datatable in .net. I need to flip the location of two of them. For example, a datatable that the select statement had an order by priority clause. The user wants to up the priority of a single row by selecting it and clicking increase priority, how do i move a row up (AKA flip two rows)
View 2 RepliesAdd Rows To A Datatable With Parallel.for?
Jul 13, 2010I have this sub :
Private Sub error_out(ByVal line As Integer, ByVal err_col As Integer, ByVal err_msg As String)
Dim ln = t_erori.Rows.Add
[Code]....
I suspect this is because it's trying to add the same row twice.
How can i make this work ? Or what else method could I use to do this ?
I need this datatable because my app is writing some results in there, but any other method to store the results that works with parallel.for would be ok.
Asp.net - Merge Rows In Datatable Which Had Same Value (VB)?
May 13, 2012I have one datatable tempDT with value :
[Code]...
The problem is I want merge duplicate serial_no into one row which the value of testong adding to new column. I have tried many ways, but I can't find the solution. Here is my code behind :
[Code]...
Datatable Compare Rows?
Apr 17, 2009I have a datatable object, which is populated from a webservice.Apparently, the web service just throws everything (data) back to me. The data which gets in my datatable looks like this:
Dept Code Value
Science ABC 5
Science ABC 6
[code].....
Delete All Rows In Datatable?
Apr 8, 2010At the moment I use this code but I have 591 rows to delete and it takes forever to loop and delete each row on an individual basis
[Code]...
Delete Rows From Datatable?
Feb 10, 2012i need to delete some rows from datatable
i don't know the indexes i have 2 columns to idendify the rows to delete
how to achive this in easy way
i don't want to delete inside loop wat will happen if i have 2 million rows? tats why i don't want to delete indendify the rows and delete in loop
How To Delete Rows From DataTable
Mar 20, 2009I have a Datatable in my code in vb.net. I need to delete rows from the datatable. The name of my Datatable is "temptable".in my row deleting event of a Gridview control. I wrote code as follows:
In the Row_Deleting event of Gridview:
temptable.Rows.Remove(Gridview1.Datakeys(e.RowIndex).value)
But,it shows an error as follows:
"Cannot cast System.Int32 to System.Data.Datarow".
Loop Through The Rows Of A Particular DataTable?
Jan 9, 2009IDE : VS 2008,Platform : .NET 3.5,Here is my DataTable columns :ID Note DetailI want to write sth like this :
View 8 RepliesRemove All Rows In Datatable?
Jul 29, 2010I have a simple application that uses a database to store usernames and passwords.I have a hidden control that, when activated,should clear all usernames and passwords from the datatable.Then, one admin account is added. I have tried the datatable.clear method BUT while it throws no errors, it doesn't clear the datatable.I have also tried the datatable.reset method, with the same problem. I am now trying this method:
Dim row As DataRow
For Each row In Authenticate.Logins
row.Delete()[code]....
Set Value For All Rows In DataTable Without For Loop
Feb 21, 2011I'm trying to set the same value for all rows for a single column in a datatable without using for loop. Any faster methods to achieve the same.
View 2 RepliesWay Of Accessing Datatable Rows?
Feb 22, 2010am just curious to know...which is the better or more efficient way of these two?
Note: tblOD is a DataTable
For dtrows As Long = 0 To tblOD.Rows.Count - 1
dgv1.Rows.Add(tblOD(dtrows)(0), tblOD(dtrows)(1), _
[code].....
Way To Access Datatable Rows
Jun 13, 2011Way to access datatable rows
[code]...
Asp.net - Datatable To String With Unique Rows
May 2, 2012I have a datatable and I want to create a text file using this datatable. I want that each row of the newly created text file is unique. If there is a duplicate row, then it should add * to both rows ( duplicate rows)
I am using following code:
Dim str As String
For Each row As DataRow In dataTable.Rows
str += row(1) ' This is text data
[Code]...
C# - Mark Non-unique Rows In A DataTable?
Dec 6, 2010I have a DataTable which I want to check if values in three of the columns are unique. If not, the last column should be filled with the line number of the first appearance of the value-combination.
[Code]...
I solved this by iterating the DataTable with two nested for loops and comparing the values. While this works fine for a small amount of data, it gets pretty slow when the DataTable contains a lot of rows.My question is: What is the best/fastest solution for this problem, regarding that the amount of data can vary between let's say 100 and 20000 rows? Is there a way to do this using LINQ? (I'm not too familiar with it, but I want to learn!)
Datagrid With Columns Tha Have Different Datatable Rows?
Feb 9, 2010i want to make a datagrid with 2 columns and many rows
the columns i want to have databinding with a datatable
i want the 1 row 1 column of datagrid have data from 1 row of datatable
i want the 1 row 2 column of datagrid have data from 2 row of datatable
[code].....
Dataset - Print Out Rows From A Datatable In .net?
Dec 31, 2011I am new to vb.net and I am trying to query a database and print out the records in the row to the console window. I got it to work, but I have a feeling that there is a more concise way to do this. One thing that I am sure is wrong is that I had to convert the dataset to a datatable to be able to retrieve the values. Is that correct? Could you take a look at the code below (especially the for loop) and let me know what I can improve upon?
[Code]...
DataTable Rows Find Does Not Work
Nov 25, 2011Dim datatable_default_view As DataTable = DataTable.DefaultView.ToTable
Dim servicenumber As String = datatable_default_view.Rows.Item(e.RowIndex)("Service Number").ToString
If datatable.PrimaryKey.Length = 0 Then
Dim keys(0) As DataColumn
keys(0) = datatable.Columns("Service Number")
datatable.PrimaryKey = keys
End If
Dim datarow_edited As DataRow = datatable.Rows.Find(servicenumber)
Datatable Rows Remove Not Working?
Jul 15, 2010I am trying to delete rows from datatable using code below,
View 10 RepliesDB/Reporting :: Grouping Rows In Datatable?
Aug 10, 2009I am trying to summarize a datatable based on a primary column and then add certain columns. For example this table
col-1 col-2 col-3
1 AA 2
2 BB
[Code].....
This simply doesn't do anything becuase it thinks the target table doesn't have a primary key.
Error Loop Through The Rows Of A Particular DataTable
Nov 17, 2011i want to read table row by row i have table with two columns but i want to read the first column only row by row her's my code
Dim col As String = "SELECT users.user1,users.valueid FROM users"
Dim cmd As New OleDbDataAdapter(col, CON)
Dim ds As New DataSet
[Code].....