i have a datagridview with checkbox column including some others columns,my problem is that i want to make the datagrid noneditable except checkbox column..how do accomplish this task? my second question is that i have roll no column in datagridview.i m able to generate roll no through looping but unable to save them to database.
View 5 Replies
i want to ask about the check/uncheck the checkbox in a column in datagrid.if all row in the checkbox column is not selected, what is the code is.because i want the msgbox appear if the user not check any row.
View 17 RepliesI am assigning a 'ds' dataset to datagrid.In addition to that I want to add new column with check boxes.That new column will be first column of datagrid. Currently I am using below code,
DataGrid1.DataSource = dsResult.Tables("Result")
Result table has 4 column....in addtion to that i want to column "Selection" with check boxes
logic on coding a checkbox column on a Datagrid on a Windows Form. What I want the Datagrid to do, is once the checkbox is checked on the Datagrid, to enable several other columns also on the Datagrid. I think I almost have it, but I cannot figure out how to id the checkbox.
View 3 RepliesHow do I add a CheckBox Column to my DataGrid and set the Check box in a way that Depending on the value returned in my row, it is either Checked or not checked?
View 9 RepliesIt's lacking of loop and I dont know how to fix it. The main problem is that not all the selected records are inserting/ed in the database. only the first checked checkbox inside my datagridview. I'll attached a picture for the viewers to easily understand my problem.
So,First,Here's my code:
For i As Integer = 0 To DataGridView1.Rows.Count - 1
If CBool(DataGridView1.Rows(i).Cells(0).Value) = True Then
command.Parameters.AddWithValue("@CONSO_PARENT_STOCKHOLD_CODE", DataGridView1.Rows(i).Cells(2).Value)
ParentDone = True
[code].....
I've a ListView with 5 columns and the CheckBoxes property is set to true, Now how do i make the Checkboxes on any other column rather then the 1St column? Also i would like to change the state picture of the checkbox to something else when it's checked and unchecked.
View 2 RepliesMy question is how can I create an event that would catch an enter key when I am editing it. Like I would type a note and hit enter key when I finish. Because columns of the datagrid does not have events like other controls or datagrid itself. What I need is something like this:
Private Sub ColumnNote_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles ColumnNote.KeyPress
End Sub
[Code]....
How to add a checkbox column at first column of datagridview including column header?After adding, how to code to "check all" or "uncheck all"?
View 27 RepliesI have a DataGridViewCheckBoxColumn who's column name is "booReadyToReport want to hide all the checkboxes in this column if "bintAnalyteCodeID" doesn't equal the selected value in a combobox on my form. ut I run this bit of code the DataGridView DataError event fires currently, have nothing in the event except an comment. he code seems to work, but I'm new to VB.NET and I'm wondering if this is the correct way to handle thishould I use the CellPainting event?
highlight rows with RBF3
For Each dr As DataGridViewRow In Me.dgvCalculatedResults.Rows
f dr.Cells("bintAnalyteCodeID").Value = Me.cbxAnalyte.SelectedValue Then
[code].....
I have a datagrid who's ItemsSource is a strongly typed IEnumerable object In this datagrid, I have a checkbox column, a price column, a part name column, and a 'total selling for' column. On checking the checkbox I need to update the total selling for column with the value in the price column. This part I have working, however, how can I get the checkbox to remain checked when this happens?
Private Sub UpdateSellFor(sender As System.Object, e As System.Windows.RoutedEventArgs)
Dim _CB As CheckBox = DirectCast(sender, CheckBox)
Dim _ID As Integer = _CB.Tag
Dim _PP = DirectCast(DG_PartsToSelect.CurrentItem, PartTyping).PartPrice
[code]....
I am printing a files that are shown in datagrid.. But I want to choose a file that I don't want to print by checking the checkbox that I added in datagrid..
I have here the code for printing.. Anyone can edit my code that will print those file that is not checked.
Code:
Try
openMySQL()
Dim sql = "DROP TABLE IF EXISTS dummydisconnectionorder"
[Code].....
I have 2 columns of checkboxes in a gridview, where the header also contains a checkbox. If i select the header checkbox, it will check all corresponding checkboxes in its colomnow, what I want to happen is if I select column 1 checkbox, column 2 checkboxes should get unchecked and vice-versa.
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
[code]....
Dim Comp = From C In db.Table1 _
Select C.Completed, C.Taken, C.Namne
Datagridview1.DataSource = Comp
Am using the Entity Framework and Columns Completed and Taken are of bit Datatype. When the query results are displayed in the datagridview, these bit columns are returned as of ColumnType Textbox - so i get a Datagridview textbox column with true or false string values.
I want to display Completed and Taken as Checkbox columns (either ticked for True or un-ticked for false) but ofcourse i can't do this in EditColumn dialogue because the Datagridview is unbound.
how can i change this in code at runtime
It seems that on clicking datagridview column header, the column will be automatically sorted based on the column type. I have a column showing some numbers. If column type is string, it sorts "1","20","3" into "1","20","3". If column type is double, it sorts into "1","3","20" which is the result that I want. However, there might be some erros in the numbers and error messages(text) will show in the cell instead of numbers. So I cannot set the column type as double. I want to ignore these error messages and sort all the numbers. How can I do this?
Also, I need to add some background colors to different rows in datagridview. So in the column header click event, I call the bkgColor Sub to achieve this. My question is that how can I override the sorting method in this event?
Private Sub DataGridView1_ColumnHeaderMouseClick(sender As Object, e As System.Windows.Forms.DataGridViewCellMouseEventArgs) Handles DataGridView1.ColumnHeaderMouseClick
Try
[code]....
I have a datagrid that I am unable to change the width setting, it always reverts back to the original setting.
To change this setting:
1. select the datagrid view tasks
2. Edit columns bound column properties
3. Select Width property
4. Width property will always revert back to the original setting.
I have check the properties settings without any luck.
I am working with Vb.net. See the code below; I have the following problem - when I click the checkbox (Cells(3)) the value remains 0.00 in Cells(4) unless I click another checkbox is when Cell(4) gets populated with the value from Cells (5).
What I want it to do is when cells(3) is checked, Cells(4) should be populated instantly with the value from Cells(5). Rather than still show 0.00 until another checkbox is clicked. I think th eproblem is in the eventhandler as highlighted
[Code]...
I am working with Vb.net.. See the code below;I have the following problem - when I click the checkbox (Cells(3)) the value remains 0.00 in Cells(4) unless I click another checkbox is when Cell(4) gets populated with the value from Cells (5). What I want it to do is when cells(3) is checked, Cells(4) should be populated instantly with the value from Cells(5). Rather than still show 0.00 until another checkbox is clicked. I think th eproblem is in the eventhandler as highlighted
Private Sub Dgvoneoff_CellValueChanged(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles Dgvoneoff.CellValueChanged
Dim irow As Integer
[code]....
I am limited to using ASP .NET 1.1, as for this environment I cannot upgrade to 2.0 or beyond Essentially, I have a very simple datagrid that has a checkbox in one of the columns, which is a template column...the code for the datagrid is this:
<asp:datagrid id="dgDates" OnItemCommand="gridEventHandler" BorderColor="Black" BorderWidth="1px"
CellPadding="3" runat="server" AutoGenerateColumns="False" HorizontalAlign="Left" AllowSorting="True"
OnSortCommand="SortData" OnItemDataBound="gridItemDataBound">
[code]....
Now, my issue is that when I set cbStaticRolling to the CheckBox control through FindControl on the e argument, it seems to set the variable okay, but doesn't seem to be setting the right one, or setting it properly, because "Checked" property is false regardless of whether I check the box or not?
I have the following code:
[Code]...
and when a user clicks on cell4, it's supposed to add the value of "Holiday" to my database and all of the data from that line. What's happening is that I can't even click on the checkbox.
I have the following Private Sub holidaysaveButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles holidaysaveButton.Click For Each dr As DataGridViewRow In DataGridView1.Rows
[Code]...
and when a user clicks on cell4, it's supposed to add the value of "Holiday" to my database and all of the data from that line. What's happening is that I can't even click on the checkbox.
I have a datagridview that is connected to a table from my database. It displays all the records from that table. The question is this, how can i put a checkbox column on my datagrid for me to be able to delete multiple records from my database? I am using visual basic .net 2005.
View 4 RepliesI have a tbl called tblProjectpatients which also has 2 fields Yes and No (these have the data type - Bit).
These two fields have been populated with false and true values.
On my form, I have a datagridview which is populated with various values from tblProjectpatients.
The problem am facing is that the checkbox's for Yes and No on the datagridview are empty at runtime eventhough at the backend they have either False or True values.
I am expecting the checkbox showing on the datagridview to be either checked or Not Checked depending on the True or false values.
I haven't seen a related thread (yet)I have a VB windows application that uses a datagrid to display a text column and a checkbox column. Only one row in the display can have a checkbox entry = true. If a checkbox is selected, the app is to search the rows and all other checkbox entries are to be set to false.My event handler is: Private Sub dgMember_CellContentClick(ByVal sender As System.Object, ByVal e As ystem.Windows.Forms.DataGridViewCellEventArgs) Handles dgMember.CellValueChangedI first had to have this handler code check a flag and exit if true (when initializing the display) because it was called for each row during initialization.
View 1 RepliesI created 10 checkboxs dynamically. I am using DataGridView. According to Checkbox Checked the corresponding data will display in the Datagridview. How can i connect checkbox to DataGridview. Example: Assume Each Checkbox have one subject. like English,Maths,Physics,Chemistry,Arts..... If i click English Checkbox then Corresponding Students list will show in the datagrid. when i checked Maths , corresponding students list will show in the Datagridview. How can build the code to develop this???
View 5 RepliesFor i
As
Integer = 0
To DataGridView1.Rows.Count - 1
[Code]....
Interesting problem. I have a datagrid with several columns which are bound to an Access database. Here's the situation...I'm concerned with the 3rd column.This is what I'd like to happen... when the 3rd column(is a checkbox) is checked then column 4(TIME_USER) would be populated with the current time
Basically, this application is meant to keep track of tasks that the user has to do at a certain time of the day. When the user checks the checkbox it would record the time in the database for that task as to when they did it. I found some code from a forum that i changed to fit my needs, but it's not working.
[Code]...
I am working with windows application. I have a datagrid in vb.net. Its first column is a checkbox. I want to know which checkboxes are checked and which are not. My code is :
[Code]...
I'm writing an Windows Form Application and need to add an unbound checkbox to a datagrid.The datagrid displays the fields of an Access 2007 table and I need the checkbox to give the user the option to select/deselect any of the records shown in the datagrid. After the user clicks on a button, the application must read the whole datagrid to detect what records were chosen by the user and process each one accordingly.I tried using TableStyles but as this new column is not part of the database, it won't work.
View 4 RepliesI am using a VB.Net form in which I have a table of sql. In it is a boolean field.
I want to show this field in a form as checked if that field value is true and if false then it should not be checked. Is this is possible?
If possible please help me with the code which I have to type to make that column in the datagrid view to checked or not.
I have created the sql inside vb.net using add new item and then a database.
