I have this program:
Module Module1
Sub Main()
IO.File.Create("C: ext.txt")
[Code]....
How to make my program not to use the newly created file 'text.txt'? Notepad fails to open it, it says (The process cannot access the file because it is being used by another process).
I have been working on this for a while and this is what I got so far.[code]...
View 4 RepliesI have encountered a wierd problem, and I'm unsure if this behaviour is caused by my code or by Windows itself... I can't make any sense of it! Basically, I have written an automated backup system for a text editor. It should save up to 5 backups for each filename, each in a 'AutoBackup<filename><filename>_<number>.bak' format. Here, <filename> is simply the name of the file my program is backing up, and <number> is the first 'free' number. So if the backups are "Test_1, Test_2, Test_4, Test_5", the next backup will be called "Test_3" (since 3 was 'missing'). When there are more than 5 backups, I want my code to delete the oldest files until there are again 5 backups left. I am using the following code for this:
vb.net
'Backup doc.SaveFile(path & "" & filename & "_" & newNum & ".bak") 'If more than max files, delete oldest Do While numOfFiles > maxBackups Dim d As Date Dim maxDate As Date = Date.MaxValue Dim oldestFile As String =
[code].....
Then, after another backup, Test_1.bak is again deleted!I thought this was pretty weird so I had a look at the files in windows explorer, taking a good notice of the creation date... That's when I saw that after Test_1.bak is created a second time (after a file named Test_1.bak was deleted), it carries the same creation date/time as the old (deleted) Test_1.bak..So my code still sees it as the oldest file (while it is actually the newest) and deletes it...
I wrote a program that writes to a new created file a line of text. Anytime I try to open the new created file, I see a dialog box titled "Inconsistent Line Ending". I do understand why I receive this message. I wrote this program in VB.NET.
View 1 Repliescreating a new folder on a temporary file and moving/copying a file on the newly created temporary file.
View 4 RepliesI'm using the VB code below to create a file and write to it:
Dim myFileStream As New IO.FileStream(tempFolderLocationLabel.Text & "" & tempFileName, IO.FileMode.Create)
Dim myStreamWriter As New IO.StreamWriter(tempFolderLocationLabel.Text & "" & tempFileName)
myStreamWriter.Write(sageLinkerRef)
myStreamWriter.Close()
myFileStream.Close()
this is what i have so far:
[Code]...
I currently have a JSTree all set up to do the creation and renaming of a new node:[code]The problem is that my success doesn't seem to get hit when I return an integer ID on the create node, thus I can't set it to a global variable. What exactly do I need to return in the function to get back the ID from the server? I'm simply returning a new integer right now.
View 1 RepliesI know how to monitor newly created files etc but what i want to do now is monitor firefox and IE when they close. my application is running in the bg and i need it to perform a command when the browser closes.
View 4 RepliesIm curently writing an app for windows mobile (so its using the compact .net framework)It has a loop which finds out how many images are in a folder, makes a picturebox for each one, then sets the .image property to the appropriate image. It also adds the name, size, location etc.What I dont know how to do is add a mouseclick event to it?I probably would have a subroutine already written in the code which could be used, or would it have to be a new one made for each picturebox?
View 1 RepliesI am getting this error trying to save an Image to a newly created Folder.
View 8 RepliesI have made a form that creates a table in a database based off of the text a user inputs into a text box.I would like to then display that table in a DataGridView on the form so that the user can update the data in that table.Is there any way that i can add those tables to the dataset and get them to display in the DataGridView after the user clicks the create table button?
View 7 Repliesim having a problem now when opening a link in newly created tab.. i have a tabcontrol and only 1 tab for the main.. the main tab have only 1 textbox and a button the user put a URL in a textbox and after the button is click it creates a new tab and navigate to that url.. i can create a new tab after the button is click but my problem is after the button is click it not focus the newly created tab..
View 2 RepliesI have a Private Sub that I execute whenever a user clicks one of two or three things, and in it I create a new tab in my TabControl. Once the new tab has been created, I select it then add a formatted textbox to it. However, it is not selecting the new tab and therefore only adding the rich text box into the already selected tab (not displayed, of course, because it has a dock style of Fill.) Here iis my code to select the new tab and format / edit the rich text box:
Try
tabMain.SelectedTab = tabMain.TabPages.Item(intTabIndex) 'Select the new tab
AddHandler rtbCode.TextChanged, AddressOf DisplayUpdate 'Add TextChanged event to handle updates
[Code]....
I wanted to simply on click a button to add those newly created textboxes to an array of textboxes. Starting with those labeled "Address". But I am finding this very difficult. I am able to add those originally on the form into the array very easily. But am unable to add the newly created textboxes into the array.
Here is my code so far below.
Public Class Form1
Dim MyBoxes() As TextBox = {Address, UserName, Password}
Dim Numbox As Integer = 1
[Code]....
How i can make a program to verify if files of a text file exists ?
Example:
I have directories.txt who contains:
Line 1: C:PasswordsAccounts.txt
Line 2: D:GamesFifa 11fifa.exe
So i can to verify if these two files exist?
But not: my.computer.filesystem.fileExists("for each one")
I wanted to simply on click a button to add those newly created textboxes to an array of textboxes. Starting with those labeled "Address". But I am finding this very difficult. I am able to add those originally on the form into the array very easily. But am unable to add the newly created textboxes into the array.[code]....
View 2 RepliesI wanted to simply on click a button to add those newly created textboxes to an array of textboxes. Starting with those labeled "Address". But I am finding this very difficult. I am able to add those originally on the form into the array very easily. But am unable to add the newly created textboxes into the array.[code]...
View 2 RepliesIm trying to make a program which would check for users from text file on a certain website I can populate the list box, and loop through it's items here is the code i came up with so far and it doesnt work properly, it pops out first item in the listbox, and last item only, even though that they shouldnt be popped out
Private Sub WebBrowser1_DocumentCompleted(ByVal sender As System.Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs) Handles WebBrowser1.DocumentCompleted
If Not ListBox1.Items.Count < 2 Then
[code].....
(this is supposed to check every user, and if user doesnt exist, website will return page not found, else user exists and his name is added to listbox2)
Im learning Visual Basic 2010 on my programming class and we reached the part of file handling. Here i tried to make a simple program that can create a text file with the content of what i type on the textbox, basically i create the file if it doesn't exist, and if it already exists i append the content to it. Once the file is saved i can read it using the "Open" button. Unfortunataly, whenever i try to create the file, the compiler gives me an error saying that it cannot modify a closed file, although i've followed up the execution instruction by instruction and i can't find the error.
Imports System.IO
Public Class Form1
Dim body As String
[code]....
I finished creating my help file for my app using .chm program. Now, how do I go about associating that help file with my program so people can click on help and it's there. Do i need to bring it into my resources?
View 2 RepliesI have created setup file of my program & it shows error when I install it there in another pc which doesnt have visual studio. Even I have tried to install it there in another pc which has visual studio & it worked well. I am confused. I am use Vb.net 2008 and ur .net frame work will be 3.5 .It shows following error message
View 6 RepliesHow can we Find newly selected text in Combo Box. Whenever I do this, I get the old text instead of the one they just changed to.[code]
View 10 RepliesI am trying to add text to an already created file on vb.net. When I run the program there are no errors and it writes everything to my liking, but currently when it goes to save, it makes me create an entirely new text file with any name I choose to give it. What I need to do is for it to automatically get added onto the end of an already created text file without deleting any other part of the file, which we will call "data.txt." Here is the code I already have
Imports System.IO
Public Class Frmadd
Const FILE_NAME As String = "data.txt"
[Code]....
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Ceci cr�e un fichier *.TXT dans un endroit statique
[Code]....
So my app is supposed to make a exercice.bak out of the .txt file but whatever I do it says the program is accessing it... any hints how i could makw the program SAVE the file and stop it's constant access to it...?
send the values of my form to a text file upon submission? I need to create the file if it has not been created and append the file if the form has been created. I will then need to display the text file on the second tab of my form.Firstly, I need to know how to send the values of the form to the text file.
View 4 RepliesEdit: I figured out how to save as new, now all I need to do is save an already created text file.
View 7 RepliesI have been thinking about creating an event calendar. I thought through the idea of how i would attempt it, but only came up with one idea; Text files, a folder for each year, and a folder for each month.. when the user creates a new event a text file gets created in: e.g. \2010\Jan\12.txt and if another event is on that same day, the text is added into the same text file. But this leaves lost hopes for my other ideas, since it will get very complicated. Like yearly events, monthly events etc.
View 6 RepliesI want to display the date a text file was created and modified could anyone point me in the right direction? Visual studio 2008
View 9 RepliesI want to make my save button save the contents of the text box on the selected tabpage to the open text file. I cannot think of how to do this, as the tabpages are created at runtime, and so do not have a global name. The write function is here (the ??????? is what I am unsure):
Private Sub SaveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripMenuItem.Click
Dim fileWriter As StreamWriter
[Code].....