Open A Document From Template In VBA?
Oct 27, 2011how do I open a document from template in VBA?
View 3 Replies
ADVERTISEMENT
Anyway To Check Open MS Word Documents Filesize Of Open Document Before Saving Document?
Sep 28, 2011I have a function on my program that allows a user to load a listbox filled with words that are matched with words inside a databank. The databank is filled with 2 string arrays and file of .jpg Pictures. The Arrays attached to each word inside the listbox are approximately one page. Each page is two paragraphs of Text(string Array) and one Picture(20Kbytes).My problem is this. When the user selects the option print all, the listbox with approximately 10255 words is selected and begins to fill a Microsoft Word Document.Because the alotted amount of space needed for the MS Word Document is approximately 5 Gbytes,I need to open about 10 Documents and insert the String Array's and Pictures into each document one at a time.Is there anyway to check the filesize of the Open Document before saving the document.This way I could check the open document inside the algorithm for 512 Mbytes of memory and save the document before the size gets above 512 Mbytes.[code]
View 2 RepliesWriting Data To Word Document Using Template
Jun 22, 2011I am attempting to write some data from my program to a word document using a template. What I would like to know is how can I duplicate a page in the word document depending on data in the program. To be more specific the user enters product data into the program. Most times it will be only one product however sometimes it will be 2 or 3 products. When it is more than one product I will need to duplicate a page in the word document to enter the second or third product information.
View 1 RepliesWord Template - Print The Document (Letter) With All The Merge Fields Filled
Jun 6, 2011I have a program in which I am trying to do the mail merge with the word template that I already have.
I have already setup the datasource for the word template in the word itself and it is pointing to my Employee Table which has all the information for the employee. I have also inserted the merge fields in the document where ever I need them. Now I want to print the document (Letter) with all the merge fields filled in from my application but for only employee whose Name or Number I sent from my program not all the employees I have in the datasource.
Now if I have to do it in Word, we have an option called Find Recipient in Mailings -> Preview Results in which I can set the Name or Number of the employee to get all his information to do the merge but how can I do the same thing from my program.
I can send all the fields values from my code like in the code below but I want to use my datasource to provide values. I have employee's Number I want to provide to the template to find the employee - so all the values are filled based on the employee's Number.
IDE :: How To Open A 2003 Template In 2010
Mar 4, 2011I'm working with 2010 now, but I have an old project that was created in 2003. I started that project with a 2003 vb.net template. I would like to use that template again, but I want to develope a current 2010 application. Does that make any sense? How do I get the vb 2010 express to recognize my old 2003 vb express template?
View 2 RepliesOpen Excel Template And Save File?
Oct 13, 2011I want to open a excel template with a browse button, the file needs to open and must be directly saved by the user. after the file is saved the file location needs to be displayed in a textbox.With this i can open excel itself, but i don't know how to open the template and save the document
Dim Xl As Excel.Application
Dim Filepath As String
Dim Workbook As Excel.Workbook
[code]....
The file opens and i get a save as dialog, but when i want to save the document it doesn;t save at all, However it won't give me a error.
Trying To Open A Excel Template And Rename Or Save To New Location
Mar 29, 2010I get the following error message when I try the following:[code]"Excel cannot open the file 'ContactReports.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file."What I would like to do is Open a excel file that is the XLTemplatePath and the either rename or save the file at the XLSaveReportPath and then use that renamed/saved file to fill the report out.I am using Visual Studio 2008 in VB.NET
View 2 RepliesWord Interop: Setting Doc.Bookmarks("BookmarkName").Range.Text Causes Watermark And Other Elements Of Template To Disappear From Document
Apr 28, 2011I am automating Word from VB.Net.I open a document by:
Dim msWord as Word.Application = CreateObject("Word.Application")
Dim doc As Word.Document = msWord.Documents.Add(Template:=Path)
where path points to a template file I created with a header and a watermark. The template has some bookmarks which I want to dynamically set to some appropriate text values:
doc.Bookmarks("DocumentTitle").Range.Text = "The Joy of Office Automation"
If I comment out that line, the document opens in Word with the watermark, etc, in place. If I let that line execute, it inserts the text as appropriate, but the watermark and other things disappear from the document. You can actually see it flash briefly, and then disappear.FWIW, this is Office Word 2007, and I am opening a .Dot (Word 97-2003) template. The Bookmark.Range.Text I am setting is in the document header.
VS 2008 : Create Template At Runtime And Save It The Template With Name?
Aug 20, 2011In VB.NET,I want to create template at runtime and save it the template with name. for ex : Administrator design a page with 5 fields like using firstname, lastname, dob,nationality and job. He want to assign this page to the user with some restriction like user1 need to enter the all the fields and save it the forms as user1profile, but user2 need to enter only firstname and lastname and save it as user2profile.(in features, he can remove the fields from the form).
View 1 RepliesC# - Using Types In A T4 Template That Exist In The Same Project As The Template?
Aug 4, 2010I'm working on my first T4 code generation tool to add some Stored Procedure helper code to my project. I've created custom types (e.g. StoredProcedure and StoredProcedureParameter to help with my code generation and have included the assembly and namespace references in my code:
<#@ template debug="false" hostspecific="false" language="VB" #>
<#@ output extension=".generated.vb" #>
<#@ assembly name="$(TargetPath)" #>
<#@ import namespace="StoredProcCodeGenerator" #>
This allows me to use my custom types in my T4 template code. However, because my custom types exist in the same project as the T4 template code, I can't recompile my project once I run the template code without restarting Visual Studio. This isn't very much fun.
I read a great article that addresses this exact issue by using the T4 Toolbox, but it's not working. Either I'm implementing the VolatileAssembly directive wrong or the T4 toolbox simply didn't get installed. I'm not sure that the toolbox got installed correctly (I'm using VS 2010 on Win XP).
Open A PDF Document?
Jun 12, 2009I want to open a PDF document when I click on a button.I know the way to open a word document but couldn't apply the same method to open a PDF document.
View 5 Replies.NET Open Word Document?
May 4, 2009In VB.NET how do you open a word/PDF doc? I used to have the code and I remember it was very short.
View 2 RepliesC# - Open A Document As Another User?
Jun 24, 2011How do you open a document as another user? The document type is unkown (could be pdf, .xls, .doc, images etc). Document is on a network share, username, domain and password are all known.
I have thoroughly researched this question and I do not beleive the question has been answered here. Please prove me wrong. This question gets close Open a shared file under another user and domain?
But unfortunately it opens the file to a filestream, I need to open the file in its associated application.
How To Open A Word Document
Dec 31, 2008I am trying to open a word document from within my windows form application and am unsure how to do this.I know i need to add the microsoft word reference but when i do i receive the following error:
View 22 RepliesHow To Open Document List
Jul 26, 2010I have written a text editor and I have created a menu option called "Display Modes". From within Display Modes the user can change the way in which he/she looks at the open documents, but what I also want to do is list the documents that are open in that menu (Display Modes), sort of like a Most Recently Used/Viewed list. So for instance I have got a lot of documents open at once and I want to quickly see what is there I can go to my Windows Menu click Display Modes and look at what I have got open.
View 3 RepliesOpen A Word Document
Feb 26, 2010How do you open a word document in VB.NET. The document is a manual for the program.
View 5 RepliesButton To Open A Word Document?
Jun 3, 2011I am using vb 2010, and i really would like to Just open, not modify a word document.
Now i have browsed the internet, and this is what i have found..in project menu>refferences> select .. microsoft word 9.0 object library
Private Sub Command1_Click()
Dim objWord As Word.Application
' this would be faster with a "with objWord" but for clarity I use the explicit
[Code]....
Now, my problem is, that i only have microsoft word 14.0 object library
So now it throws me "Word.Application" unknown errors
Code To Open A Word Document?
Jun 17, 2009I got this code to open a document[code]...
It freezes my pc and does not open the document (well, sometimes it does open a document), and I find [url]... processes on the windows for every click I do on that menu item.
Error : This Command Is Not Available Because No Document Is Open
Jan 27, 2011I am trying to build a word add in to add xml files to documents, I am under the assumption that Microsoft.Office.Interop.Word.Application.ActiveDocument will work with the document being used, but when I try to use the add in I receive the error: "this command is not available because no document is open " o:
Dim activeDoc As New Microsoft.Office.Interop.Word.Application
Dim currentDoc As Microsoft.Office.Interop.Word.Document = activeDoc.ActiveDocument()
the second line.
How To Open Specific MS Word Document
Jan 19, 2011I create Ms word document MyWord in C hard disk then I create this code to open it but didn't success without any error.
vb
Dim oWord As New Word.Application
Dim oDoc As New Word.Document
oDoc = oWord.Documents.Open(Application.StartupPath & "c:MyWord.doc")
Open A Html Document From Url Into Application?
Mar 28, 2010I was wondering if there was any way I could open a html document from url into my application so I could parse it simular to an xml document.
View 8 RepliesOpen A Word 2003 Document?
May 13, 2011I'm trying to open a word 2003 document, but I get an error that says 'Application' is not a member of 'WindowsApplicaion1.Form1'. Below is the code that I'm trying to use.
View 2 RepliesOpen A Word Document In Program?
Dec 18, 2009How to open a word document in vb.net.needs to add any reference file.
View 1 RepliesOpen A Word Document With A Button?
Nov 5, 2009in my program i want to make a button that opens up a seperate word document eg i want a button that opens a saved word document in the same folder as the program but not inside the program but in microsoft word.
View 5 RepliesOpen To A Certain Page On A PDF Document From A Link?
Feb 28, 2012I'm trying to open a PDF document from a hyperlink to a certain page. So I set the link to this:I can type the #Page=14 to the end and press enter and it will work but for some reason it will not work the first way.
View 2 RepliesOpen To PDF Document To A Specific Page?
Dec 15, 2011how I could open to PDF document from a link field in a table. Also, is it possible to perfrorm this using VBA?
View 2 RepliesOpen Word & Edit Document?
Jun 2, 2011I would like to know if its possible to open a word doc from a path and write something and save it?
View 3 RepliesLinking A Button To Open Word Document
Jun 22, 2010I want to open a word document from a button and want the document (attendance register) to be available to resources once compiled and using on CD from another PC. At present having issues getting it right.[code]I am using visual Studio 2005 proffesional, windows7, Office 2007 but saving doc's as 2003.
View 5 RepliesLinking Via Button To Open Word Document?
Apr 14, 2010I am battling with this code. I want to open a word document from a button and want the document (attendance register) to be available to resources once compiled and using on CD from another PC. At present having issues getting it right!!!
Public Class Form2
Private WordApp As New Microsoft.Office.Interop.Word.Application
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code].....
I am using visual Studio 2005 proffesional, windows7, Office 2007 but saving doc's as 2003.
Open A Rar Document And Transfer It To Microsoft Word?
Apr 4, 2011how to open a rar document and transfer it to microsoft word
View 2 Replies