In this syntax, i'm trying to put a Date and a location on the same line on a printed form. But I'm getting an error squigly under everything after my " before the in.
Iassume what I'm missing is basic programming, but I can't figure it out for the life of me.
e.Graphics.DrawString("Dates:
" & txtDates.Text,
" in "
[code].....
i have seen that this is a common error but not sure what the common solution is. I need to date stamp the word doc that is being generated from my Excel Macro and i need to save this to a specific shared folder.every time i try to insert CallDate into the saveas i get an error that basicaly means that then / is not supported as a naming character. any sugestions? See Code Below.
[Code]...
My mailbox regularly gets emails from people wanting to promote their events. Usually the subject line looks like this:
fwd: come to *TMC* meeting this weekend, <5/19/2012 @ 1300 >
I need a script to read the date, then make an appointment on my outlook calendar, using that date, time and term (TMC) as the meeting title. So it should make an appointment on 5/19/2012 at 1pm, called "TMC meeting"All appointments are 2 hours by default.I used The identifiers "*" and "<>" as an example, and can be changed to be whatever, what is important is that the meeting gets on my calendar with the correct title.
Was just wondering if there is a way to set the location and size of a form in the same line ... as i have a form that takes a little while to resize all components ... and when u tween the form's location and size at the same time it chunks as it sizes.
View 1 RepliesBasically I am looking for a means within a asp.net 2.0 (or higher) application, to identify a time zone and UTC offset for a specific location and date. I want to be able to look up the time zone rules using either city & state, Zip, or LAT & LON I have an event database that tracks location, date and time for the events. Times are recorder relative to the event and the records do not currenlty indicate the timezone for the event or whether or not DST is in effect. Recently, I have encountered a situation where I need to link several events across different time zones. What I am looking to do is:
first, record a master event, say for August 13 2012 at 8:PM in New York, NY 10021
Second I need to record a related event in Houston TX.
When I record the related event I want it to automatically populate the date and time relative to its local time time zone rules. To do this it needs to be able to identify the effective timezone and UTC offset for the master event as well as the linked event so that I can calculate the correct date and time to display on the satelite program. As a future update I would probably capture the time zone /utc offsets with each program so that I don't have to recalculate the master record each time I want to add a related event.
So far I have not seen a way from system.timezone or timezoneinfo to be able to look up a timezone and the effective UTC offset of a given date and location.
I need to calculate the location of intersections between multiple date ranges, and the number of overlapping intersections. Then I need to show which date/time ranges overlap each of those intersecting sections. It is slightly more complicated than that so I'll do my best to explain by providing an example. I am working in VB.Net, but C# examples are acceptable as well as I work in both.
We have several high risk tasks that involve the same system. Below I have three example jobs named HR1/2/3/4 with start and end date/times.
HR1 {1/6/2010 10:00 - 1/6/2010 15:00}
HR2 {1/6/2010 11:00 - 1/6/2010 18:00}
HR3 {1/6/2010 12:00 - 1/6/2010 14:00}
[Code]....
[code]The two Location lines throw errors but the Text line works fine. I've played around with this until I'm blue in the face but can't get it to compile.
View 4 Replieshow to get the highest date of txt file how to get the max value of arrayForTheLine(3) in 14 lines( that's mean count highet date line - 14) and when i get the max how to get the date of the line that has the max value this the file
<ticker>,<date>,<open>,<high>,<low>,<close>,<vol >
aaaa,20100919,19.8,19.95,19.7,19.7,222643
aaaa,20100918,20.05,20.1,19.75,19.9,174402
aaaa,20100915,19.8,19.9,19.65,19.9,351537
[code]....
I have on my form a ListView Control and a DateTimePicker control. I want when I select the specified date from DateTimePicker to be added what I select in first line of ListView. Then I select the second date from DateTimePicker and adds that as a second item of listview. How can I achieve that? [Code]
View 2 Repliesi am using an unbound datagridview so i can dynamiclly add rows. all that is working fine. but the grid is not is the location i have coded.. i am using the defualt form as a base then coding the unbound stuff in.. should i just create a blank class file and do everything? the only problem i am having is the grid must bees in the correct location according to the pixel point that i have given it. Right now it is placing the grid at point (0,0) no matter what point is entered on the line for location. so what am i missing??????
View 3 RepliesI got a error when I run this code:
Dim btch As String
Dim LeftPart As String
[CODE]...
It says index and location must refert to a location withing string
dim cn as oledbconnection
cn = New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:valid.mdb")
[code]......
I have 2 group box components and both are same size,font,location and visible is false. When i click button2, the groupbox1 won't appear(the group box2 is on bottom n group box1 is on top).
Example:
button1
groupbox1.visible=false
groupbox2.visible=true
button2
groupbox1.visible=true
groupbox2.visible=false
Because i want to show the different,so the location have a little different(actually both are same location). I think my code is no problem. The problem i guess is both component cannot locate at same location?
we have a user that my program works fine for.. and another that it just crashes for.. they get this error
"You cannot start application <App_Name> from this location because it is already installed from a different location."
then they run it up again and it comes up.. and then just closes..in reading some stuff online it says its a framework 2.0 sp 1 issue ?these pc's have 3.5, but my program uses all 2.0 stuff..so is this a 2.0 sp level issue ? or should I make my programs start to use framework 3.0 instead ?
I was using this old method of creating a bunch of rectangles when I need to get the location of a certain point within a grid so I could draw images on the grid. The thing is, I don't want to use rectangles, I want to be able to just round the location as if I were using rectangles. I need it to be able to round the point (66,70) to (50,50) so if you can imagine a grid and the mouse position being within that square in the grid, I need to get the location of the upper left corner of that square.
View 5 RepliesI have encounterd a problem when trying to re-enstall a program i have writen in vb 2008.I get the following message:"You cannot start application Shell from this location because it is already installed from a different location."This program is to be used on many workstation computers and i need to be able to update any changes by just reinstalling the program, no uninstalling needed first. If the program was installed from a cd first and needs to be updated from a flash disk this error will be a problem, if the update is from a cd as well then there is no problem.Is there a way to change the installation package to ignore where the program installs from and just update itself?
View 2 RepliesI'm currently working on a project that has a simple game . I want to change the location of a label ( middle ) to another location when a key is pressed down. But there is something wrong with the first of the If statement .I've underlined "point " because it has the error.
Private Sub Space_Navigator_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles Me.KeyDown If e.KeyCode = Keys.Up Then If middle.Location = [u]Point[/u](156, 655) Then middle.Location = New Point(156, 547)
End Sub
what i need to do is open a txt file, read line by line, decode each line into an array and display. Now all works ok apart from one line.
sTextLine = objReader.ReadLine() <-- Value of string cannot be converted.
full code here
-------------
Dim objReader As New System.IO.StreamReader(sOpenFile.Text)
Dim sTextLine As New ArrayList()
Dim sText As String = ""
Dim i As Integer = 0
[code]....
i need to developer project from vb.net to vb 6.0 and i have already project in vb.net and i have to convert in into vb 6.0 but i need same GUI format,but i get problem that is in vb.net control height and weidth is in pixel formate and there is vb 6.0 i dont know so i copy control's height and weidth or size so i got there is difference in vb 6.0 so any one have idea how to convert vb.net location pixel to vb 6.0 location format .
View 1 RepliesI'm trying to copy a picture from one location and paste it into another location however VB throws out the following error
Exception from HRESULT: 0x800A0046 (CTL_E_PERMISSIONDENIED)
both locations are on my local computer. So not sure what is causing the problem.
Here's the code
Module CPASU_SPC
Sub Main()
Console.Title = "MOARW Programs"
[Code]....
Title pretty much says it all. How do I format the date of a dateandtimepicker to insert it into the SQL date datatype?
View 20 Replieshow to read text from a listbox line by line and put current line in a label?
View 3 RepliesHow would i go about reading a file Line by Line that within that line The values are delimited by " Example of the data:
"bob" "cat" "1243"
"steve" dog" "6789"
I've started this with this code but not sure how to go about the next stage:
Using MyReader As New _
Microsoft.VisualBasic.FileIO.TextFieldParser(My.Application.Info.DirectoryPath & "Records28112011.jd")
MyReader.TextFieldType = FileIO.FieldType.Delimited
[code]....
How to copy folder with its content from location to another location defined by FolderBrowserDialog
View 7 RepliesI am trying to read in a TextBox line by line and take the first 7 characters of each line and output everything in another TextBox.This is what I have so far.
Dim line, lines() As String
lines = TextBox1.Text.Split(Environment.NewLine)
Dim i As Integer = 0
[code].....
i need the app to preview the line in textbox in timeintervalof 1 s (can be change)nd when it will reach to the end it close the text file and andreread it after let say 1 m ..
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim myStream As Stream = Nothing
[code].....
how I can ensure that conversion of a date to a string and a string to a date will give me the same date format.
For example:
Code:
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click
Dim d As Date = Date.Now
[code].....
I'm actually only interested in the date part as the label text shows so f is more than I want.But also, the day and month are reversed.
i have 2 datetimepicker which are startdatedatetimepicker and enddatedatetimepicker.. the start date should not be more than end date..thus i need to check these two date.. here is my code...
[Code]...
I have a date time as a string, eg. "2010-08-02", I'm trying to convert it to UTC with the following code snippet..DateTime.ParseExact("2010-08-02Z", "yyyy-MM-ddZ", CultureInfo.InvariantCulture)When I print to the console, I get the following: 8/1/2010 5:00:00 PM.Is there a reason why the date shows up as the date before the date I'm trying to parse? I could just add a day to this to advance to the original day.
View 3 RepliesI have the following code inside my MDI parent form:For Each crl As Control In me.Controls
crl.?????
Next
The code mainly used for getting some info from all child forms.I can get all the general property like size, location by crl.size or crl.location. But if all the forms have an own variable like myTxt. How could I get this own variable by this For Each method?