This is the code I'm using now to start another EXE from my application:
Process.Start(My.Computer.FileSystem.SpecialDirectories.Temp & "MyDownloadedApp.exe")
This EXE has a command line option however - /check. How can I change this so that it runs with the /check command?
When I set this, I cannot read it ..CommandLineArgs is '0' in the following code.For Each argument As String In My.Application.CommandLineArgs ' Add code here to use the argument.
View 6 RepliesWhen I set this, I cannot read it ..CommandLineArgs is '0' in the following code.
For Each argument
As String In
My.Application.CommandLineArgs
' Add code here to use the argument.
Next
software developer
This illustrationshows 4lines of arguments usedforprojectis run in Debug mode.
View 3 RepliesI am trying to create a gui that will interact with an existing external console application, e.g. the user only changes information in text boxes or radio buttons and that will prompt the VB.net program to sumbit a certain set of commands. I will create a folder for the end user that has only two programs in it, the VB.exe and the OtherProgram.exe. I have tried using ProcessStart with SendKeys to send information to the terminal with limited success (errors include multiple instances opening, entering "ttttttteeeeeeexxxxxxtttttt" instead of "text") and also Shell(OtherProgram.exe) and SendKeys with the same result.
I am trying to make an easier experience for using a legacy Fortran.exe program rather than every user going though the command prompts in the terminal window.
I'm using Process.Start to start an external command line application and using the StartInfo.Arguments method to send parameters to the application. I imagine I'll need to use a loop... but I can't figure out exactly how yet.I need to send anywhere from 1 - an infinite number of files names to this application. Each file has to be sent one after the other. So once the first one is done, I need to loop back around and past the second one.I can probably use the Directory.GetFiles method to get all of the files, but I don't know how to assign them.
View 7 RepliesI have beginner skills using VB (am using the Express edition to learn). I would like to know how to set up a conditional statement in a Windows Form (WF) app that would check if a specific command line has been passed by another separate app that launchesthe Windows Form app using command lines, and if not passed, then the Windows Form app would shut down (exit, close).So far, I can use:
For Each s As String In My.Application.CommandLineArgs
If s <> "xyz" Then
Me.Close()
[code]....
I'm wanting to explore the options of having external hardware plugged into a USB port or Serial Port so my computer can communitcate with buttons or visa versa.
[URL]
How and where can I start on this?
Also are Serial Ports on there way out and should I focus on USB?
First let me say that I am not sure whether or not this should go in this section or the API section, and if it needs to be moved I apologize. My issue is fairly straight forward, but for some reason I cannot get it to work.
I am trying to send a command to a command line and then submit the command. I have been trying without success to get this to work in v2008 Express and v2010 Express, Here is the code I am trying to us:
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" ( _
ByVal lpClassName As String, _
ByVal lpWindowName As String _
[Code].....
I am using the following code to run defrag and to analyze if the C: drive requires defragmentation:
Dim analyze As Process = System.Diagnostics.Process.Start("C:WindowsSystem32defrag.exe", "C: /a /h /u /v")
This process runs through analyzing, runs it in normal mode & prints the progress to the command window.
My problem is that as soon as the process is complete the command window closes. I need it to stay open so that I can read the results.
I am trying to send a command to the external command line (cmd.exe) from the Windows form application that I'm writing in VB.NET (using VS2008).
I can only access the external program thru the command line (its not my program) and I must do so from a form app.
I am trying to use the following code. I am able to call a cmd.exe window, but I can't pass the command line my command.
Using mp As New Process
With mp.StartInfo
.FileName = "cmd.exe"
[Code].....
I am using a CheckedListBox that is populated with Filenames (full path, i.e. C:TestTest.jpg)When I have the files that I want in the CheckedListBox I wish to click a Start Button which will process the list one at a time using an exe program that runs on the Command Line. There are arguments that need to pass to the command line as well as the file location in order for the program to process.I currently have it working but the issue is the loop finishes quickly and it is left up to the CMD.exe to finish the process. What I would like is for the LOOP to wait until each file completes processing before passing the command for the next file in the CheckedListBox.There some reasons I wish for it to work this way.
1) I would like to have a button that can Pause/Restart the Loop.
2) I would like to have a button that can Stop the Loop so the whole process can end.
3) I would like to have the Loop remove each file one by one from the CheckedListBox after it has been processed.
4) I would like to display a Message once all the files have been processed.
5) And if it were possible I would like to report the status either by text or a progress bar showing where it is at in the process.
6) And the ability to add some error handling if possible.
Since the Loop finishes so quickly as it just passes the command to the command line using the & as a seperator it is the command line that is handling the rest of the process. Because of this there is not control over it in the GUI.The code I am using allows the Command Line text to display in the Form so it won't open up a seperate window to run CMD.exe. This is the desired affect as I would like everything to appear to run from within the Form itself.
[Code]...
I am struggling to pass a parameter to a VB.NET application via a Windows scheduled task. It works perfectly in Visual Studio (passing a command line arguement via project properties).If I am calling a VB6 application, then I will supply the following parameters and it works:
Run: c:progra~1TestTest.exe TestParameter Start In: c:progra~1Test However, if I supply the same parameters in VB.NET, the program throws an exception when it tries to create an instance of a class in the Form.Load: System.NullReferenceException cannot create instance of object.
I have also tried the following:Run: c:program filesTestTest.exe TestParameter Start In: "c:program filesTest" This time the status of the scheduled task changes to "cannot start".What is the correct way to specify command line parameters in a scheduled task for a VB.NET program?UPDATE I found the solution on this web page:[URL}.. I am still confused as to why the program would not create an instance of an object when I used the 8 bit paths (i.e. progra~1)
I am in need of a form that shows various options, exactly like the Options in Visual Studio. Since there are so many options I too want them categorized, with a TreeView to the left taking care of showing the right category.The usual 'easy' approach here would be to just place a TreeView control on the form, add some nodes, and give those nodes a tag or key that corresponds to a panel or UserControl with the options for that category.Since there will be a lot of options however, this is not really feasible design-wise; the form would be cluttered with possibly 50 panels, all of which I would need to select and bring to front from time to time to add controls to them that represent the options.
So I decided to create a custom control that does exactly that. The control is very similar to my Wizard usercontrol, users can add OptionsPanels at design time, which inherit Panel and simply represent one panel of options. When they do, the panel is added to a container panel, and at the same time a TreeNode is added to a TreeView. The control uses a custom ControlDesigner to handle design-time clicks in the Treeview, selecting a different node would select and bring to front the corresponding panel, allowing the user to add the controls he wants.
Due to the design time support the problem of having 50 panels is no longer present, only one panel will be visible at a time and selecting the right panel is as simple as selecting the corresponding TreeNode, just as during run-time. Anyway, I got all this working, but only for a single 'level' of categories. As you can see in the Visual Studio options, there can be multiple levels of categories. For example, the Environment node has a bunch of children, where each child represents one 'options panel'. There can even be deeper nesting, see the Text Editor node for example.Let me begin by drawing out the basics of how my control works so far.
The main control is an OptionsView control, which contains a SplitContainer with a TreeView to the left and a OptionsPanelContainer to the right. The OptionsPanelContainer is merely a Panel to which only OptionsPanel controls can be added, and which raises events when this happens, as well as when OptionsPanels are removed from it. An OptionsPanel also inherits Panel, and these are the actual panels the users will see in the control, one for each option category.For now, each OptionsPanel has exactly one corresponding TreeNode (and vice versa). In the Visual Studio options, each 'parent' category usually has a 'General' node as the first child, and the parent and this General node show the same option panel, but I am ignoring that for the moment.
The OptionsView control has a property Panels that returns the ControlCollection (Controls property) of the OptionsPanelContainer (in other words: it returns a collection of OptionsPanels that are in this container panel).
vb.net
<Editor(GetType(Designers.OptionsPanelCollectionEditor), GetType(UITypeEditor))> _ <DesignerSerializationVisibility(DesignerSerializationVisibility.Content)> _ Public ReadOnly Property Panels As Control.ControlCollection Get Return Me.PanelContainer.Controls End Get End Property
A custom CollectionEditor for this property takes care of the designer: even though the property type is ControlCollection, the CollectionEditor knows it should create instances of the OptionsPanel control instead of just Controls.When it does this, a corresponding TreeNode is also created and its Tag property is set to the OptionsPanel. Vice versa, the Node property of the OptionsPanel is set to the node. Hence the node and panel both know their corresponding object.
vb.net
Public Class OptionsPanelCollectionEditor Inherits System.ComponentModel.Design.CollectionEditor Public Sub New(type As Type) MyBase.New(type) End Sub Protected Overrides Function CreateCollectionItemType() As System.Type
[code]....
So far so good, this all works fine. I can add Panels via the designer and when I do a new TreeNode appears in the TreeView. I can select this node and the panel becomes visible (comes to the front).Now, I am a little stuck. How do I implement child option panels? And more importantly: how do I let the user add child panels?The most logical choice I think is to let each OptionsPanel have a property (ChildPanels or something) that returns the child OptionsPanels for that panel. Once the user selects an OptionsPanel then, he can look in the property grid to find its ChildPanels property and add child panels to that.
There is a problem though: what would this property return? It must return a ControlCollection of some container (this is, I think, a requirement for the designer features to work, otherwise panels are not added to the Form.Designer.vb file). But there is no container. I cannot add them to the OptionsPanel itself, that would make no sense because the parent OptionsPanel has its own set of controls (the options itself...), there cannot be another (fully docked) Panel on top of those obviously.The container of the main OptionsView then? That is not an option either, its Controls collection holds ALL OptionsPanels, not just the children of the selected panel. I cannot 'select' only the right panels either, that would require me to return a new instance of ControlCollection, it would be impossible to return the actual ControlsCollection that holds merely a small selection of its controls.
how to redirect outputs from console to a window form text box,but the console application I'm using is always running real time, thus my .net application hangs until I close the program that is read real time.The code displays the application to a 2nd form with a textbox multi line. Until I close that my entire program hangs and the console application monitored runs.
How do I code it to:
1. Run real time without hanging the entire program.
2. the console app must run at all times. (figured how to hide/ and no window created for it)
Sub Console()
Form2.Show()
Dim myCon As New Process
myCon.StartInfo.UseShellExecute = False
[code].....
I want to run the following command line program from VB.NET: rotor95.exe -d -k "password" -i "C:FileLocation" -o "C:FileLocation" The reason for this is that I don't want my users to have to drop out to a command line prompt in order to run a tiny program for 3 seconds. Typing in a 50 - 75 character file path twice isn't any fun either.
I tried using tooltask as discussed in the MSDN2 help but it appears to work with switches (/d etc.) but not parameters (-k "password"). I couldn't get the thing to work. See the following for the tooltask example:[URL]..light now I'm just using Shell("rotor95.exe -d -k "password" -i "C:FileLocation" -o "C:FileLocation") which works just fine but I'd like to use the .NET 2.0 super-whammy version of handling this problem if there is a better way to do it.
how to use basic FTP functions straight from the command line tool. and I started using Visual Studio to create "macros" for the command line tool (i.e. writing down specific functions to perform, write them to a txt file and then run Shell() to execute.)But what I want to know is if I can open a command prompt window and then interact with it. Say for example I'm writing an FTP class/object, I'd want to be able to keep a window up for my program to send commands to (And wishfully read data back from it.)Because it seems to me that whenever I use the Shell() command it just opens a prompt window and then closes it after my line of code has been executed. Is there way to interact with a command line window from Visual Studio? And maybe even scrape data from the terminal like with terminal emulator scripts?
View 1 RepliesI have a console application which reads .txt files. I want to be able to drag a txt file over my app and it would automatically open my app and show the text files contents. I think I have to use command line arguments like this:
Sub Main(ByVal cmdArgs() As String)
End Sub
Sub ReadFile(FilePath as String)
End Sub
But how can I pass the text files path to my ReadFile sub?
OK! I've written my application in all it's GUI glory. I now just want to be able to run it from dos/a command line/batch, with no GUI appearing? So it just runs (& does its batch process).
How can I detect if my application has been initiated from command line/dos?
How do I then not open up the application and show its GUI etc?
Printing Work Orders from with in a .NET scripted screenSummary of code:
Public Overrides Sub onload(ByVal e As ScriptonloadEventArgs)
Dim CWONO As String
SetValue("CWONO") = "WO_Number" '(This field is automatically created with previous code)
[code].....
I was wondering if it's possible to create a .vb source file from notepad and be able to build/compile from the command line without the need of a vb environment?
View 1 Repliesis there anyway to get the another application environmenat commandline argument
View 1 RepliesI have a forms app that contains a few forms. My task is to make it run invisibly when called from the command line with arguments.I have defined a Sub Main in a module and made it the startup item. I have an if/then/else that looks at args.length and if it equals 0 then I load the form and run the app normally. But how do I handle things when args are passed? I still need access to all the functions defined in my main form. Can I load the form invisibly and still "use" it?
View 14 RepliesWhen you open up a .txt file, the command line opens up notepad.exe with the argument %1. which opens the text file. i dont know about the function but i understand a little bit about it.
So what i wanted to do was create a .lxproj, and make it open up with my application. i have done this part so far with an installer that creates registry keys. but, what i would like to know is how to open the file. for a test i would like a message box to be displayed if the program is run by clicking the .lxproj. if its opened normally the messagebox doesnt display.
I am making a console application that will be prompted from a cmd. I want to be able inside my application to start an other program. Here is the line I am trying to use: %SystemRoot%Microsoft.NETFrameworkv4.0.30319MSbuild.exe /p:Configuration=Release test.shfproj This is making Sandcastle Help File Builder create a documentation with the test.shfproj i've builded previewsly.
[Code]...
I want to create a shortcut that do following:Link back to "my application"with command line parameter so that it will not do anything.
View 4 RepliesI'm making a program that has to execute commands in cmd.exe, but without actually opening it. I set RedirectStandardOutput to True, and I need a way to read the result of the command from the stream. Right now, I use ReadToEnd(), but there's no end to the stream, apparently. How do I read the result of the command?[code]...
View 2 RepliesI'm a bioinformaticist, I'm trying to teach myself how to develop programs that are easy for everyday users to automate programs used in biological research. I thought VB would be great for helping people be more familiar with bioinformatics. Unfortunately, I'm brand new to VB and am stuck with my first program.
All I want to do is have a window pop up where the user then selects a file from an OpenFileDialog box, and pass the filename to a bioinformatics program names msconvert. What I've been doing keeps giving me a message that seems to says, "Unhandled exception has occurreed in your application. . . . File not found."
However, as you can see in my code (below) I have a MsgBox that shows that the correct file HAS been selected, and I can get the whole thing to run from command line.[code]....
how can i make my own program must run with command line? if the program run without command line, it show some error msgbox..
View 4 RepliesHowever, I've just inherited a problem and was wondering if anyone knows if I can solve it with a command line application written in .NET. Basically, we have a SAP transaction which has been written which imports data from a csv file.At the moment, it will be a manual process requiring someone to log in and run the transaction. Does anyone know if it's possible to action this from a command line app which we could then set up as a scheduled task?
View 1 Replies