Section And Each Of Them Can Be Resizable?

Aug 3, 2010

I would like make my for like below picture.

In this form, there are three section and each of them can be resizable.

How can i do this


.net 4.0 - ASP.NET 4.0 Custom Configuration Section: "An Error Occurred Creating The Configuration Section Handler"

May 2, 2012

I am creating a custom config section that will allow me to manage what ELMAH exceptions I want to ignore from my VB.NET/ASP.NET app. Here's my code. I made it easy to paste in a blank code file if anyone's up to the challenge of diagnosing the problem.


When I execute this code:


I get the error An error occurred creating the configuration section handler for IgnoredExceptionSection: Could not load file or assembly 'WEB' or one of its dependencies..

What boggles my mind is that this all works fine in my C# console test app after I convert the code from VB.NET using a web utility. However, when I paste the VB code from my web app into my VB.NET console test app, it doesn't work there, either, so it appears to be a C#/VB issue. What am I doing wrong here?

View 1 Replies View Related

Way To Make Resizable

Aug 2, 2011

I just made a basic browser using VB... So now I am wondering how to make it resizable so that when it is resized the browser and buttons remain in same layout but the text box and browser space resize to the new screen size and the buttons do not change layout or get covered (it has buttons for back, forward, refresh, home, and stop then a text box for the url and then a go button, I want them to remain in same order but the text box to enlarge and the go button to keep to the right side of the box - and I want the browser spot to grow too).

View 2 Replies View Related

Form Is Resizable When It Shouldn't Be

Jul 26, 2010

I have a FixedSingle Form (I actually wan't to simulate the MessageBox). Only if i disable the ControlBox property the Form can be resized.

I have tried VB6 also (just for comparison), where everything is "OK" (as I expected it to work for me).

View 5 Replies View Related

Resizable Arrays In SSRS?

Dec 28, 2011

I am writing custom code in my report and in it I need a re sizable integer array. [code]...

View 1 Replies View Related

Resizable Controls In Runtime?

Dec 25, 2010

I have to implement an application that allow the user to design his own card, the user will be able to drag and drop controls from toolbox and move them in the form and re-size them.

I can't make the control to be resizable,and i want to make the control just like the one in visual studio designer with the container that allow user to change the size  ..

View 2 Replies View Related

User Resizable TextBox?

Jun 16, 2010

I am running a program that needs to allow the user to be able to change the size of a text box at run time. I know I need to use the MouseDown, mouseMove, and mouseUp events. I just need some help with the coding to send the information.

View 2 Replies View Related

VS 2008 Do Not Want Resizable Windows?

Dec 29, 2010

I do want my windows to be resizable i.e. the MDI Child ws should not be resizable. owever, I could not find any property which I can set for the same.

View 3 Replies View Related

DataGridView - New Columns To Be Resizable By User?

Jun 10, 2011

Recently I was working on a project that included several DataGridView objects. With one, I dynamically create columns based on the types of data being displayed. I established a baseline size (so each column would initially display the same width), and a minimum size. AutoSizeMode was set to None. I knew that I wanted the new column to be resizable by the user, so I put in code to that effect:
Resizable = True

When I tested the code, the columns were not resizable. I traced the code, looking for anything that would reset the property Resizable to False. Nothing. I commented out the line with the
Resizable = True command;
The columns were resizable after this. At this point, I remembered that Resizable is defaulted to true. But I still did not understand why the columns were not resizable after setting the property to True.

I did some experiments. If you create a new DatagridViewTextBoxColumn, add it to the
DatagridView, and then set the Resizable property to True, the result (via Watch) is False {2}. If you do the same, but set the Resizable property to False, the result is True {1}.

This is disturbing (and confusing) on at least two levels. The fact that the exact opposite boolean value is passed in. The fact that {2} is False. It was always my understanding that VB treated
{0} as False, and
Any other value as True.

View 1 Replies View Related

Drawing A Resizable Rectangle On Picturebox

May 26, 2010

I have try many different methods but still no to do this? As i found a good tutorial over

here where it create a resizable rectangle on a form. But what i want is on a picturebox with image.

View 7 Replies View Related

Resizing Controls In Resizable Windows?

Jul 24, 2009

I have two DataGridView controls, with three buttons in between them vertically, in a VB 2005 form that need to be resized and moved around on a form resize.

The code below works, and does what I want. It takes the difference between the new size and the default size, splits the height difference between the two DataGridViews, and moves things around correctly.

What bugs me about it is that I've hard-coded the defaults into the ResizeEnd handler. How would I go about passing the default size so that I don't repeat myself?

Even better, is there a way to do it with anchoring, docking, and other stuff, so that I don't even need to write code?

Private Sub dlgShowAssets_ResizeEnd(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.ResizeEnd
Dim defaultWindowSize As New System.Drawing.Size(759, 619)


View 1 Replies View Related

Runtime Movable And Resizable Textboxes?

Dec 12, 2008

I am trying to create TextBoxes and RichTextBoxes that can be moved and resized durig runtime as part of a program that makes/edits media-slides for online learning. The textboxes can currently be moved and resized by filling out the values for Top, Left, Height and Width on "property sheets", a method I would like to change into something a little bit more user-friendly

I created a user control with besides the TextBox or RichTextBox 3 objects to control the moving.I have currently added 3 panels to try to use for this purpose.I have written all the code to resize the TextBox when my new control is resized and when theMoveAndResizeHandles are set to be visible.The resize panels are currently 10 points x 10 points (easy to change because the 10 points are defined in a constant) and located top left above and bottom right under the textbox. The panel to resize is located next to top-left panel and has the width of the textbox - 10 pixels

My question at this point is: were Panels an appropriate choice or is there a more fitting way to do this?

Which events should I use to check for movement and resizing of the control? I would start looking into "dragging and dropping" as event, but I have as yet no idea wether this will work and what the gotcha's will be in my approach.

View 1 Replies View Related

User Resizable And Draggable Control?

May 27, 2009

I want to create a control which user can resize and drag anywhere in the form at runtime. Like in Visual Studio windows form designer.

View 2 Replies View Related

Custom Backgrounds On Panel Resizable With Form

Jun 11, 2012

I need to have a custom background on a panel that can be resized with the form and want to know how I should go about designing it. Maybe have three images the left side, right side and the middle is just replicated? The thing is I would like for it to have a border and there will be buttons attached to the top edge so simply stretching a static picture may make the buttons not line up properly.

View 1 Replies View Related

Line Control - Resizable/Movable At Runtime?

Jun 15, 2012

My project is similar to JM's Manipulating GDI+ Drawings and NickThissen's Shape Editor. I haven't used their code though, I've written my own similar code. My shapes are custom controls.

All the shapes are working fine. But I'm having trouble with line control.

1. I've tried my own line control. But to resize/move I need to write separate code. The common code that works for all other shapes is not working.

2. I've tried VB Powerpack 3 Line Control,but moving/resizing it in runtime is too much complicated. It is NOT a real control. (I guess) It is directly drawn over a "ShapeContainer" control. So, i have to write custom code for this too.

View 3 Replies View Related

CSS Layout Creator - Create Resizable / Dragable Squares?

May 12, 2012

I am making a CSS layout creator. You can create reziable/dragable sqares. And when you press a button it get the css code for it. How would i get the locations and size of each box? And then spit that all out in a rich text box?

View 22 Replies View Related

Drawing A Resizable Rectangle (by Edge/corner Dragging)?

Jul 19, 2003

I am trying to make a rectangle that can be resized by the userby clicking and dragging the edges/corners of the rectangleTypically, if the mouse enters the rectangle region, then smalladjustment boxes should appear at the corners of the rectangleand also at the middle of the rectangle's edges (to allow the userto drag and resize the rectangle). When the mouse leaves therectangle region, then the adjustment boxes should disappear.I have the code to draw the rectangle and to produce the smalladjustment boxes, but I'm not sure how to accomplish thedrag and resizing steps (or if it's even possible with the way mycode is written).

Code:Imports SystemImports System.DrawingImports System.Windows.Forms
Private bBlocking, bValidBox As Boolean    Private pt1, pt3 As Point    Private rectBox As Rectangle    Private cornerRect1 As Rectangle    Private cornerRect2 As


View 10 Replies View Related

Where Is VB6 Forum Section

Jul 23, 2009

I searched all over the this forum and did not find a section to ask my questions about VB6

View 2 Replies View Related

.net - How To Get A *section* Of Window To Stay On Top

Dec 29, 2011

Basically what it does is - you can mark a section of the screen and it creates a preview window for that section and keeps it on top of all other windows. I want to make a similar thing, for 3 reasons: 1. I can't use third party software in my office PC, 2.I can't afford it, 3. It will be an immense pleasure to create something useful, which I can share with the community.So, I was wondering, what would be the way to go about dot net (probably a frameless windowet it to stay on topcreate a context menu to exit

View 1 Replies View Related

.net - Prioritize Section Of IF Statement

Oct 8, 2009

I've got an IF statement that validates data. Basically looks like this:


But if I do this I've got the same error message twice and I believe it's less clear what my intent is. I've also tried throwing parenthesis around the s Is Nothing clause, but it doesn't work. Is there an elegant what to test if the object is nothing and then test a property of it?

View 2 Replies View Related

.net - Render Section Within Using.BegingForm()?

Jun 20, 2012

I'm trying to render a custom section within a form in VB.NET MVC3? the section is in the master layout, and is defaulted - but id like to create a custom one when in a particular view


View 2 Replies View Related

Can Use A LinkLabel To Go To Another Section Of The Page

Jun 17, 2010

Can I use a link label to go to another section of the page similar to HTML

View 1 Replies View Related

Can't Add Javascript At Head Section Right?

Dec 14, 2009

can anyone show me samples or guide me to do a pop-up calendar after I click a button. The pop-up calendar is for the user to select their date of birth, so I would like it to customize the calendar also. And for my website I have master page, so I can't add javascript at the <head> section right?

View 6 Replies View Related

Capturing A Section Of The Screen?

Oct 19, 2006

I am trying to make a simple personal program and cannot figure out how to capture a section of the screen.I want it to work like prt scr does except it captures a specified rectangle instead of the entire screen. I am thinking I have to use Drawing.Graphics but am not sure.

View 11 Replies View Related

Combining Two Conditions In One Section?

Jun 21, 2010

How to combine these two conditions in one section
Private Sub DataGridView1_CellValidating(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellValidatingEventArgs) Handles DataGridView1.CellValidating
'condition 1
' check given value is numeric or charactr type
If e.ColumnIndex = 3 Then
If Not IsNumeric(e.FormattedValue) Then
DataGridView1.Rows(e.RowIndex).ErrorText = " must be a numeric value"
[Code] .....
'condition 2
' check given value is greater than 0 or not
If e.ColumnIndex = 3 Then
If (e.FormattedValue.ToString = "0") Then
[Code] .....

View 2 Replies View Related

Listview In The Right Split Section?

Jan 18, 2009

I have a splitcontainer on my form and a listview in the right split section. I maximize the form on load, and have problems widening the splitcontainer to fix the width of the maximized form and not cutting off the scrollbar. I don't want to dock inside the form because I have buttons I want to put above the splitcontainer. The amount that is cut off by the edge of the screen seems to vary by resolution. So I need to find a way to make this a dynamic solution.

View 2 Replies View Related

Section Off Images Away From The Form?

Oct 25, 2010

whether it's possible to section off images away from the form, but still store them and be able to retrieve the image.

View 2 Replies View Related

Tables In The Footer Section?

Mar 11, 2010

I'm building a report which holds data from a dataset in tabular form in the details and in the footer section, the details section returns all rows but the footer does not, it returns only the last row of the table though the dataset were set & attached the same way.

View 1 Replies View Related

Take And Save A Screenshot Of A Section On A Website?

Jun 18, 2011

i want to take a screenshot of a webpage in vb, but i dont want the whole webpage, just a section. More specifically...This:

Out of...

nvm the mix-match points

The webpage will be inside a webbrowser control. So it needs to use the web browser control to take the pic.And i just want the image to save into a folder called 'Accounts'.

View 2 Replies View Related

Accessing A Custom Configuration Section In .Net

Apr 2, 2009

I am trying to access settings in my config file, which is a series of xml elements listed as such:


View 6 Replies View Related

CDATA-Section In Output Of A Webservice?

Dec 3, 2010

i want to write my first classic webservice with VB.NET. My problem is now, that i should put one output-value into a CDATA section <![CDATA[... ]]> I tried it like this:

Public Function GetContent(ByVal ID As String) As News
myNews.NewsContent = "<![CDATA" + mynews + "]>"
Return myNews

But the < and the > will be replaced. How can i make this?

View 4 Replies View Related

Change Color Section Of Richtextbox?

Dec 18, 2011

I would like to be able to change colors of certain items in a richtextbox when they are typed for example the word "the" in this small example.The words would change to the color for the word.

View 3 Replies View Related

Changing The Color A String Section?

Dec 30, 2009

I am working in vb2008. I would like to change the color of a piece of a string that I am concantenating together  For example

Dim string1 as stirng - "abc"'set to black
Dim string2 as string = "def" 'set to green
Dim string2 as string = ghi"  ' set to red


View 4 Replies View Related

Copy A Section Of An Image And Paste It In Another?

Jan 26, 2011

Lets say I got two images in VB.NET. Both are 100x100.

Then I want to copy a section of the first image and paste it on the second image.

For example, lets say I want to pickup the rectangle (25,25,75,75) from the first image, and paste it at (25,25) point of the second image.

View 1 Replies View Related

DB/Reporting :: Sub Section In The Crystal Report?

Dec 6, 2010

My stored procedure return 2 set of data.Select * from customersSelect * from productsnow on the report, I can see all the fields of table customers and products in the "Field xplorer".How can I display all the data in the table customers first, then display the products right after?

View 2 Replies View Related

Get The Print Of Section Of .aspx Page?

Aug 18, 2011

I am printing reports as tables in .aspx pageNow i want to print that section containing table. how can i print that section only?As I got javascript function to print the whole page with window.print() but I want only some section to get printed.

View 1 Replies View Related

Little Section Of Code Of A Bigger Project?

May 27, 2011

I'm looking for a little help; I've tried everything. Here is a little section of code of a bigger project. What do I need to plug into the ? in the FillRectangleRectangle call to get this to work? I got the FillRect... example from MSDN, but I can't figure out how to call it correctly.

Private Sub PictureBox1_Click(sender As System.Object, e As System.EventArgs) Handles PictureBox1.Click Dim i As Integer Dim pt As Point Label1.Text = "=" & MousePosition.X & " Y=" & MousePosition.Y & " "pt = New Point(MousePosition.X, MousePosition.Y) For i = 0 To 117 If rects(i).Contains(pt) Then Beep()FillRectangleRectangle(?, i) End If Next i End Sub Public Sub FillRectangleRectangle(e As System.Windows.Forms.PaintEventArgs, ByVal i As Integer)Dim blueBrush As New SolidBrush(Color.Blue) e.Graphics.FillRectangle(blueBrush, rects(i))End Sub

View 1 Replies View Related

Make A Separate Section For VB 10 Users?

Apr 22, 2011

Isn't it time to make a separate section for Visual Basic 10 users? For example when looking for the MID string function there are a lot of complaints that it is not implemented in VB, whereas in VB 10 it is.Perhaps a good idea to filter out the VB6 items in a VB10 section?

View 14 Replies View Related

Make Section Inside Textbox?

Jul 5, 2012

I want to make section inside the textbox. For easiest example is like in IP address. There is several dot to separate it. and if we want to write we just have to click 10 <tab> 11225423 We just have to input the number and if we haven't type three digit number we just have to click tab for go to the next section. In this case, for example I want to write :


Can we make the textbox automaticly show the minus (-) character and we just have to type L1124HW??

View 4 Replies View Related

Read A Custom Configuration Section?

Sep 23, 2009

VS 2008, .Net 2.0. Read a Custom Configuration Section?

View 1 Replies View Related

Copyrights 2005-15, All rights reserved