I am working on an email that someone will send from one of our main sites requesting an account password.I am using System.Net.Mail.MailMessage to create the email and then sending it using System.Net.Mail.SmtpClient.[code]
View 4 Replieshow can i send an email in Visual basic? i have tried and i cannot get my code to configure with smtp.gmail.com... I need some code to do this. If it is not worth it, it is not fun - you say programmers are boring but i say they are worth it.
View 6 Replieslook at this code and tell me what I'm doing wrong and what needs to be entered in order to finish this program,
[Code]...
I am trying to send an email through following code
CODE
Dim MyMailMessage As New MailMessage()
'From requires an instance of the MailAddress type
MyMailMessage.From = New MailAddress("a@gmail.com")
[Code]....
NOTE : I have tried SMTPServer.Port = 587 too but still its not working
I have looked it up and not found anything other than you need to upgrade your account to do it. Is this true? If not how would i do this?
View 3 Repliesthis is driving me absolutely crazy. I am trying to send an email through a web service written in C# through GoDaddy's servers (smtp.secureserver.net) but for some reason it's not working. Here's my code:
public static void SendMessage(string mailFrom, string mailFromDisplayName, string[] mailTo, string[] mailCc, string subject, string body)
{
try
[code]....
i am trying to send a mail using yahoo.in smtp server. But it is throwing an error . i am not able to figure it out
View 1 RepliesI have this web application (LAN) that sends an email when users registers to one of our events.[code]...
The application sends the email without problems. The issue is that somehow a third person is enlisted in the cc, and receives a copy of the email!
I'm trying to send emails using smtp and getting an error This is my code :
Imports System.Net.Mail
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[code].....
This vb.net code seems to work ONLY if run... and I keep the program open for an additional 5-10 secs AFTER I see the "email sent" message. If I instead wait 0-1 secs, and then close the prg, the email goes nowhere.Does SMTP.Send() return AFTER the email is completely sent... or just when the email BEGINS to go out? (Sometimes the email body and/or file attachment might be 10k long, and take a while.)
Dim myMailMessage As New Net.Mail.MailMessage()
myMailMessage.From = New Net.Mail.MailAddress(fromEmail)
myMailMessage.To.Add(toEmail)
[code]......
Mail.From = New Net.Mail.MailAddress(test@gmail.com)
Mail.To.Add("exc@gmail.com")
Mail.Subject = "Test"
[code]....
I'm having complications with imlementing a service that uses a timer to send emails. In my code, it stops in GetDocuments() after TisValid() validates the directory path. I tried using a addhandler and threading but neither worked.
View 3 RepliesI am sending an email with an attachment using the following Code
Dim msg As New System.Net.Mail.MailMessage(req.EmailFrom, req.EmailTo)
Dim att As New System.Net.Mail.Attachment("C:Documents and SettingsmichaelrDesktop1216259.pdf")
With msg
.Attachments.Add(att)
[code]....
The file size of the attachment is 396KB, upon the recipient receiving the email outlook shows the file size as 543Kb. Strange thing is if I send an email with the same attachment using outlook the file size is 396Kb.I understand that file sizes can increase due to the attachment being base 64 encoded as opposed to just raw binary.What I am failing to see is why outlook send a file which is 396KB in size but in code when sending it, the same file is 543Kb.
I'm trying to get my program to send very simple text email messages. I did do a search beforehand, and found that I was having the same issue as someone else, but the specific question I have was not answered --
I've learned that if you're trying to send mail, you need an SMTP server... I found this list here but every one of them I've tried yields the same "Failure sending mail" error.
Here's my
Dim mail As New MailMessage()
mail.From = New MailAddress("me@mycompany.com")
mail.To.Add("destination-email@whatever.com")
[CODE]...
Is the problem that I need to show "credentials" (i.e. user/pass)? If so, what would those credentials be? Can I use my yahoo email SMTP server with my login info to do it? And is this all I'd need to add to add the credentials?
smtp.Credentials = New NetworkCredential("MyUsername", "MyPassword")
(before the smtp.Send, of course)
I was trying to follow a code example I came across the net for programmatically sending email:
[Code]...
I want to send an email that contains an attachment via vb.net and smtp. I used gmail as smtp server. This project works correctly when the size of attachment size is lower than 1Mb. When the size of the file is bigger than this size it makes an error. The message is this: "ContextSwitchDeadlock was detectedMessage: The CLR has been unable to transition from COM context 0x652fd8 to COM context 0x653148 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time. To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations."I extended the timeout period but this message is shown.
View 3 RepliesI have been searching for the answer to this for quite a while but none answer me exactly. Here is my problem, I want my user to be able to send an e-mail by clicking on a button "Send" and for this e-mailk to take the e-mail address from a text box and the message from a text box (Subject can be hard coded as it will always be the same) but I need to do it without using SMPT protocols as I don't want the user to have to input lots of information regarding their e-mail etc. Is there any way to do this.
View 7 RepliesI Started to create an application in vb.net and the application mainly monitors the drives and when the drive's free space is below a certain percentage it sends an e-mail to recipient chosen.. Now ive done this using the smtp server and unfortunately i'm on a domain so sending emails within the office is permitted but as soon as i try to mail to an external e-mail ex. [URL] it throughs and exception and states the following:
[Code]...
I am trying to Send an Email with an attachment (using Gmail) but I keep getting errors like "Operation Timed out" or Failure Sending Email". It was working earlier today but I found out that i needed to add Using statement because the email was having a file open that had to be deleted after it was sent but afterwards it doesn't work.
Here's what I have (Portion of it):
Private Sub SendMailOneAttachment(ByVal un As String, ByVal pass As String, Optional ByVal smtp As String = "smtp.gmail.com")
Using oAttach As Net.Mail.Attachment = New Net.Mail.Attachment((Environment.GetFolderPath(Environment.SpecialFolder.LocalApplicationData) & "\" & My.Computer.Name & "_" & fName & " .zip"))
Dim client As SmtpClient = New SmtpClient(smtp)
[Code] .....
The ports are correct I believe, no firewall up on my PC...
developing SMTP mail program which require user to enter uid and password for their yahoo , gmail , hotmail account and then send the mail to required email address..following is the code , sometimes it says operation timed out , while sometimes it says that operation failed.
Imports System.Net
Imports System.Net.Mail
[code]....
I am trying to send an email through following code
CODE
Dim MyMailMessage As New MailMessage()
'From requires an instance of the MailAddress type
MyMailMessage.From = New MailAddress("a@gmail.com")
[Code]....
NOTE : I have tried SMTPServer.Port = 587 too but still its not working
I am creating an application in ASP.Net 2.0, the user can choose the service that he want and submit the request after choosing the form and filling the needed details the user should click on the submit button, then two emails should be sent; a confirmation email to the user him/herself and a notification email to his/her direct manager to get the approval on the requested ticket.How can I send the emails using VB language?
View 9 RepliesI wrote a VB.NET application to send notifications by SMS using an SMTP gateway [URL]..The message includes line breaks and display well under most providers but not all.For some providers, the message will display in one line with line breaks showing as "0D0A" which just won't work for me.
Is therea solution to this problem?Using an SMS agregator is out of the question for my solution.
Yes, I did that. Turned out to be carrier specific. Yet another problem i am having is specific to the phone model (one specific user receive the messages well on his old razor, changed to a new motorola phone with the same carrier and now receives an empty message).
below is my code
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
ProgressBar1.Value = 5
Dim strTo As String = setting.tosett.ToString[code].....
i want the program to ping the server before sending the mail; if server is available then send mail if not then message box with warning appears notifying user to check VPN connection and sending of mail is canceled.
This code throws the exception ("SMTP Exception")
Public Function SendAnEmail(ByVal MsgBody As String)
Try
Dim MsgFrom As String = "amolkadam.a@gmail.com"
Dim MsgTo As String = "amolkadam.a@gmail.com"
[code]....
i am using this script in my program for sending mail
Dim mail As New MailMessage()
Dim SmtpServer As New SmtpClient
SmtpServer.Credentials = New Net.NetworkCredential("test@gmail.com", "test")
SmtpServer.Port = 587
[code]....
Now what i wanted is to send this mail through a proxy server of
Proxy Address - "192.168.0.254"
Port - "4480"
I have a grid view control in my application.
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="CPUserID" DataSourceID="GetSelectDelegatesDataSource">
<Columns>
[code]....
And I have a image button
<asp:ImageButton ID="ibtnSendInvites" Visible="false" runat="server" ImageUrl="~/images1/send_button.png" />
If you see above code you can find that there is check box functionality in my gridview. I have email address boundfield in my gridview. I want to send an email to the email addresses which are been checked in gridview.
how to validation Domain and Email Address for sending email in visual basic 2010 i used Code Below
[code]...
But Get Return abc123@xsd.com is a valid EmailID How is Valid The Domain is Not Valid Then..?
I need to send an email via SMTP, I have my SMTP in a Linux Centos Server, and I created the software to send emails with VB.NET 2010.After using the namespace : System.Net.Mail.SmtpClient, I receive an exception :
Mailbox name not allowed.The server response was: sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)
I have an app that sends emails out perfectly. I now need to know if it is possible to receive emails via my smtp server?
View 12 Replies