Server Trace Minimizes The Other Form Expands?
Dec 28, 2011A form within a form? So it can minimize maximize in there own container.
Also if the server trace minimizes the other form expands.
A form within a form? So it can minimize maximize in there own container.
Also if the server trace minimizes the other form expands.
I have this code which when I run the program and click on the btnReturn the form actually minimises to the taskbar. What I have noticed is that yellow and green lines have appeared next to the btnReset section and all the way to the end of the code and that the last line (private sub fmmxxxxload) had disappeared, which I replaced. Now when I run the program it still minimises rather than appears on screen. If I click on it in the taskbar, the correct form is displayed.
[Code]...
Is it possible to have an application where form1 opens a second modal form (form2) and then allows the user to minimized form2 causing the entire application to minimize to the taskbar.(form2 is never shown in the taskbar) A simple example of this is winzip where a second modal progress window is opened which can be minimized?
View 10 RepliesI need indent and unindent handling like the native trace class. Any ideas how this can done with log4net file and console appender ?
View 1 RepliesMost examples I have found use Trace.WriteLineIf e.g.Trace.WriteLineIf(mySwitch.TraceError,"my error");'but using Trace.TraceError("my error"); appears to give the same result (when sent to a TextWriterTraceListener)
View 2 RepliesHere is the code i am using. The file is being created, but it is empty.
[Code]...
In my case, I'd like to output to a ListView or TextBox or for that matter, any control which can accept text. For this purpose, I'd like to have a general purpose Trace/Debug listener which I can hook to in order to process the messages (convert to a ListViewItem or something) before outputting it. Is there any way I can achieve this or do I have to build my own Trace Listener? If it's worth noting, I run VS2010 ultimate & VS2008 professional. Solution should be in preferably be in VB.NET but C# is okay.
View 1 RepliesI have an activex command button located within a worksheet. After pressing the button a couple of times to run VBA Code, the caption size uncontrollably expands larger than the size of the control. I have to go back into the design mode to adjust the size of the button to fix.
View 9 Repliesim using Trace to trace and debug my Application which works fine. Now i wanted to output my Trace Information to a text file like below:
Dim c As Integer = Console.ForegroundColor
Dim ts As TraceSwitch = New TraceSwitch("SPMassUploader-TraceSwitch", "")
Dim tw As New TextWriterTraceListener(Now.ToString("yyyyMMddHHmmssfffffff") & "-" & "output.txt")
Trace.Listeners.Add(tw)
[code]....
1. How to make a application that minimizes into the "Notification Area"?
2. Do somone have a code like:
"If Sound (in system/speaker = greater then 51) then Turn it down to 50?"
If I show a new non-modal child window using .Show(frmParent), and then the parent window is minimized, the child will get minimized automatically as well.
View 2 RepliesThe problem I have is: When I click on cmdListen in the server form and cmdConnect in the client form,both programs won't respond and they crash for some reason I don't know.
Client source code:
Code:
Imports System.Net.Sockets
Imports System.Text
Public Class Form1
[CODE]...
Code:
Imports System.Net.Sockets
Imports System.Text
Public Class Form1
[CODE]...
Case : I'm creating an application (desktop application) with VB.NET (actually windows form), and using SQL Server Express 2008 for its database.
[Code]...
My problem is that i need log the stack call. I know that i can put a breakpoint in code and choose the debug menu option "call stack", But that is not a solution for me, because i need all the methods called by the application, not only the last until the breakpoint.
View 3 RepliesThis probably has an easy answer, but I haven't been able to find one yet. I was wondering if there was a simple solution to exporting the page-level trace results of trace.axd to a log file of some sort.
View 2 RepliesI have a .NET DLL that writes to the Trace. But it seems that when I call my DLL from a VB6 EXE the trace is not working. I have created an myApp.config file in the EXE folder with the trace configuration, but this does not solve the issue. I've also tried creating the Trace objects in code, but doesn't work:
[Code]...
I was just wondering why there isn't a trace level in log4Net. This level seems to be missing and I sometimes feel the need to use it, for example to output what events are being executed in an application. This feature is a part of log4J. I know I can create a custom level like is talked about here but I don't want to put time and effort in something I feel should be part of the library itself. Do you know about a log4net extension library which implements this or why this wasn't a part of the port to .net ?
View 3 RepliesWe have this funky little ObjectDisposedException happening now and again. But only on production machines, of course ... can't recreate the issue on my dev unit. So I trotted on out to the Microsoft site to see what members of this exception I could use to figure out what's going on. Microsoft says that one of the members is StackTrace. I double and triple checked that I'm looking at .Net 1.1 information as I'm pretty sure that's what I'm using (how can I check that?). Here's the page I found - [URL]
So I go back to my program to write something useful to the event log so I can figure out what's going on. And when I look at the members of the ObjectDisposedException available to me I only see the following: GetBaseException, GetType, InnerException, Message, ObjectName, ToString.
what happened to my StackTrace member? I sure could use it if I could figure out how to get to it.
Does VB have any controls or functions that will trace a link to its root url? For example I have been capturing links and then following the link to get the html and scrape for the root url. Is there perhaps an easier way -- > for example with the link
[Code]...
I have a property ProjNum that when equal to 10 should have city = 'Richland'. I have placed some if statements in the code with breakpoints for ProjNum = 10. When using [F10] to go through code city stays Richland but when object is shown in a grid at the end of the process the value is not Richland. Is there away to find out when the city value changes?
View 4 RepliesI have a winform that is taking too long to load. The form has a gazillion of controls and I would like to see how much time each control takes to load.If it were a web app, I would have just turned the trace on, but I can not find anything similar in winforms.
View 3 RepliesWorking through trace tables and wanted to check to see if my results where correct, I have designed the following code to check each stage of the loop, but the code keeps throwing up an error about casting when i try to run it. I can see when the error comes back that the writeline is holding info but what have i done wrong.
Module Module1
Sub Main()
Dim aWord As String
[Code]....
In VB .NET, I know I can get a stack trace by looking at the value of ex.StackTrace when handling an exception. How can I get the functions on the stack when I am not handling an exception? I am looking to implement a logging system of some sort to record the steps the user takes prior to a crash to assist in debugging.
View 3 RepliesI want to protect password database would not be seen in trace(vb.net)
View 4 RepliesI have been making a order processing system for a friends company and have 99% completed it. i was going through everything double checking all the components and i put a "DotNetBar" component on the form but then deleted it as i didnt need it. i only have a trial version of the dotnetbar and do not plan on publishing the software with the component on.
so after i deleted the component from the form i built a test version of the system and installed it on a different computer but when installing an error appeared saying something along the lines of dotnetbar component cannot be found. i couldn't find any trace of the component in the page.designer.vb file.
im by far no expert in vb (this is the first real program i have developed for actual use), i cannot find any way of getting all traces of the component of the project.
I was looking for trace graph control that can be helpful in displaying performance monitor. sth like cpu usage history in ctrl + ESC.are there any freely available control for vb .net that can be used for the purpose.
View 4 Repliesim looking to do a trace route to an ip (specified in a text box) and have the results displayed in a textbox. I know that this has been brought up in the forums before but im yet to find a version thats compatible with vb 2008 express edition. The vb.netmvps example is exactly the functionality im looking for but it throws up 80 +errors(*** is no longer supported etc)[URL]the host resolution isnt an issue becasue i already have the list of ip's and corresponding host names that i would be tracing in a db.
does anyone have a tracert app that is compatible with this version of vb or indeed know where i could find one ?
How can you trace the amount of memory used by each variable, process in a program? I tried CLR 2.0 but am not sure how to read the results. Are there any really good articles on CLR 2.0 that describes what I am looking for?
View 3 RepliesI am trying to code to capture the packet loss on computers, but the only way I've been able to do so was to run the NetStat.exe and the TraceRt.exe processes and capture them to a listbox (using the code below):
[Code]...
My goal here is to get stack trace information from a dynamically loaded assembly. If the dynamically loaded assembly just throws the error back to the caller, the stack trace information doesn't tell you the location in the dynamic assembly where the error occurred. If I throw my own exception, passing in the original exception, it will get added as an inner exception and will have the information need. I'm trying to avoid changing all my dynamic assemblies to throw new exceptions.
Public Class ErrorPlugin
' Example Function from plug in DLL
Public Function SimpleExample() As Double
Dim RentedUnits As Double = 42
[code]....