i'm what you call a "noob" in visual basic, and i came up with an idea to make a program the i can monitor my server in a windows form application instead of the cmd. This picture will show what i mean[URL]...
View 5 Repliesim trying to write a Form app that actually uses the program. However it doesn't seem to be doing anything. I have it to change a few settings but it doesn't do anyhting. I made it beep by using System.Console.Beep so i know its activating the function. Here is what i have.
Private Sub graphics_1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles graphics_1.Click
System.Console.Write("netsh interface ip set address name=""Local Area
[Code].....
It doesnt appear to do any of that! is there a way that i can view the console it is writting to to see whats going on?
I am working on an application that needs to have both a command-line AND windows form interface. I have designed the form, and written a basic console app. The issue comes when I try to display the GUI, as the application is a Console project in VS2008. I do the following:
Dim Apply As Boolean = False
Dim Check As Boolean = False
' Snip.
[Code]....
And the GUI flashes for a second, but then goes away. How do I make the GUI stay up, and wait for input?
vb.net 2008 I am using a windows form in a console application.If I turn off the console by changing Application Type, I lose the Sub Main routine that I need to startup the program.
View 15 RepliesIm abit stuck on this Instant messenging program Im using code from this website. [URl]..but its server is a console app, Id like to convert it to windows form but I have 2 errors
Reference to a non-shared member requires an object * 2 on broad cast and msg
I have a problem with reading and writing to the console from a windows form application.
I am running visual studios 2010 and I am coding in visual basic.The current code that I have is as follows:
Declare Function AttachConsole Lib "kernel32.dll" (ByVal dwProcessId As Int32) As Boolean
Declare Function FreeConsole Lib "kernel32.dll" () As Boolean
System.Console.Write("abc")
Dim test as string = Console.ReadLine()
System.Console.Clear()
ect
FreeConsole()
With the following code I can write to the console but I cannot read from it,
I manged to get some code what works fine but it uses console application I have tried to convert it by hand and change things around to get it to work but with no avail Im certain it should be simple but I may be wrong [URL]...Ignore the title of the pastebin its not C# its vb.net If you think im trying to be spoon fed I can post my convereted code but it doesnt work and proably 99.9% wrong
View 9 RepliesI want to create a console application that has a Windows Form inside of it that contains listboxes. I use these listboxes like a database. I want to load the listboxes with filenames and then work with those file names via the console code. I'd like to do this in a console method because I want to pass arugments to it from the command-line. The issue I am having is when I reference db.listbox1.items.add etc., the error I get is:
db is my Windows Form
main is my console code
vars is global variables I use
Error 1 Reference to a non-shared member requires an object reference. C:UsersxyzDocumentsVisual Studio 2008Projectsindexindexmain.vb 105 21 bindex
The code:
Public Sub open_first_file_for_timestamp()
Using fs As New FileStream(vars.working_first_file, FileMode.Open, FileAccess.Read)
Using fx As New StreamReader(fs)
[Code]....
I am merging a console application with a windows form application. The console application reads: [code] I need the Main sub to be done before the form apps starts so that the program registers as a DDe server.I would not use the console window in the merged module.I tried my. application. startupevent but it did'nt work.
View 4 RepliesI'm making program that will copy one file and over-write another to purge data.I have a windows form interface where the files can be selected and want a console application to run this process so it can be put into the PC's startup folder to run on each startup.
The problem is I need to send the file location data to the console app when I choose a save button on the form. Both are part of the same project and referenced but I can't seem to reference any variable from the win form to console app.Also will I see the Console app as a seperate icon in the program files so I can put it on the PC startup?
I've managed to find from other questions some data that allows me to achieve the next code:
Imports System.Runtime.InteropServices
Public Class Form1
<DllImport("user32.dll")> _
[Code]....
My problem is that I can't manage to find the DOS console window.
The question in C# Embedding a DOS console in a windows form
I'm trying to consolidate my application's dependencies. In this case, I have a console application (MAD - MPEG Audio Decoder) that I want to embed into my application. I've added it as a resource, but how can I reference it as a file? [code]...
View 2 RepliesI have a console application that I am running through a process in a windows form application. I am redirecting the input and output to the form application. In the console app, I am using the following code to check for the escape key which will close the program.
[Code]...
Well I'm working on a kind of GameGuard for my private server. Ok so, I want to loop a code, I dunno if I should use Console or Windows Form Application...I dont know how to explain but I'll try doing my best to make this understandable. Ok so I want to make something that will loop this code until the console itself is closed. This code below would simply kill the windows name "Cheat Engine" program if its opened.[code]But If I use a console application, How can I make this code loop every 5 second or so? What would I need to add in this simple code to make it loop every 5 seconds and until the console is closed?
View 5 RepliesI'm an absolute newb to vb (less than a week) and I'm trying to convert a console app to a windows form.In the console app, I have this code
Public Sub rconPacketReceive(ByVal fromserver As Boolean, ByVal isresponse As Boolean, ByVal seq As Integer, ByVal words() As String) Handles rconObj.packetIncoming
Dim w As String = Nothing
For Each word In words
[code]....
What I want is to have this Console.WriteLine displayed in a text box on the form but don't have any idea on how to do it.
Is there a way in VB to make something that will simulate an advanced command prompt inside of a Windows Form? For example, something like a greenscreen app?
View 1 RepliesI have a form program that runs long, and for kicks I was wondering if I could out put some data to a "real console" -not the Console useing the Output debugger.
View 8 Repliestrying to print a Form that I created using a VB.Net console application. My console application creates an instance of a Windows Form and fills it with data. I then created an instance of the Print Form class from the Microsoft Power Pack and am trying to get the form I filled with data to print but no matter what I've tried it just prints the command console window.
Dim firstPage As New FrontPage 'Windows Form
Dim pf As New PrintForm 'Print Form Power Pack
firstPage.Visible = True
[code].....
I have a Datarow array but now I need to show each row in a windows form so that the user can look through and find a suitable entry. Ideally the form would be like the DataView display with a BindingNavigator to go through the entries one by one. I have searched everywhere for some indication of how to do it but to no avail. [Code]
View 8 Repliesknow a vb.net image-control, that supports the Canon RAW-file format? (or some other way to show a cr2-file on a windows form).
View 2 RepliesMy mate & Myself are currently building a IRC Client, a problem we have come across is when opening a chatroom the form Freezes for example. We are currently using arrays so we can open multiple chat rooms and at this current time to open a chat room we use
[Code]...
I am working on a Windows service application and have followed few tutorials online and am able to install/uninstall start/stop service fine. I need to show a windows form to the user when service starts and am not sure how to show a form at OnStart() event.The form1.vb is added to the main project. ServiceProcessInstaller1 account is set to localSystem and nothing else is changed. [code]
View 10 RepliesIn my vb.net windows form application i want make a button that when a user cliked the button, the Desktop should be showed, (Show Desktop Button) .Consider a form name as form1 and it got a button like "Show desktop", when user clicked, all the application should be minimized and it should show desktop, is there any Code for VB.NET Windows Form application.
View 2 Repliesi have a combobox that has 3 cases. case "0" opens a dialog saying, "Not a valid choice"but case "1" and case"2" open up there own separate forms. (FormMain and Form3)How do i make it so if Form3 is open FormMain Can not be opened, And a messagebox appear saying so. I do not just want the ".hide" function. I already have that set.I have tried a few differant things, none of which worked. And i tried them in the formload and in the combobox selected index
View 3 RepliesI can show an excel workbook using a WebBrowser component but that only works if excel is installed on the target computer.Any other ways to display an excel sheet ? Just a viewer. No need to edit, scroll or tab between sheets.There's a lots of OCX components out there that do this but anyone know of a .net component ?Or any way to achieve it without needing Excel to be installed.
View 3 RepliesAny examples of of windows forms that interact with access databases in vb.net. What I creating is a form where you can enter data to a database and delete if need be. But display the contents of a database in a table or tree.
View 2 RepliesIn my project i have one parent window form with one menu bar and one status bar. that is what i want is:when i show the child form to see in the status ber an icon relative to the child window.How i can do that?And if that can't be how i can see an icon in a task bar?
View 1 RepliesI have a console application code below. I am trying to convert this to a windows based form application but I don't know where to start. This code asks you to input a website and then it gives you the IP address for that particular website the user enters. All the code works fine but I want this in a windows form application.
using System;
using System.Net;
using System.Net.Sockets;
class GTest
[code]....
I've made console apps that show what they are doing, open forms etc. now I don't always want to show the debug console. I want to make a Winforms app, that starts as a form. and in some menu open that same console that i see in a console project. how can i do that?
View 12 RepliesI am trying a .Net remoting project hosted in a console application.I have the following code in remote object class.
[Code]...