I have a tcpclient connection setup capturing a continuous http stream. For some reason after the first few bytes are read, the stream does not get any data for a long time. Is there a problem with my code?
Dim tclient As TcpClient = New TcpClient(url, "80")
nstream = tclient.GetStream()
If nstream.CanRead Then[code].....
What exactly does this line do?
i = stream.Read(bytes, 0, bytes.Length)
Does it read the entire message string sent by the client? I have a line to write to the stream later in the code and that does not seem to be sending anything back to the client, although the code around is excuting.
i = stream.Read(bytes, 0, bytes.Length)
While (i <> 0)
Try
' Translate data bytes to a ASCII string.
[code].....
I created a text file contains 4 bytes of data
AABBCCDD
I just want to read the first 2 bytes (AABB) to execute it with my program.
Then I'll need to read the last 2 bytes (CCDD) for another computer routines
After opening a TCP stream and writing to it via Stream.write, how can a reply be received (on the same port) and processed?
View 4 RepliesI have a listener that returns a TcpClient that must read data until the other side closes or until we stop.I have created a simple Form with two buttons. One starts one connection and the other stops it.The problem is that when I have a IOException due to the timeout of the Read the socket is closed and I cannot communicate with it again. I cannot reconnect it as is the other side the one to establish the connection.
View 7 RepliesI have a .Net program that has to run on a cluster of server 2008. To find out the right IP I resolve the dns by GetHostEntry(VarDefinedInfConfig).AddressList(0)
but when I am converting my old code (this code picks the wrong IP) dns.GetHostName().AddressList(0) => this returns a virtual IP and not the right one.So I changed my TcpListener to (dns is parameter from config)Dim listener As TcpListener = New TcpListener(New IPEndPoint(Net.Dns.GetHostEntry(dns).AddressList(0), 8001))
listener.Start()
[Code]...
I have an application that has some files in the resources that i need to extract at run-time, but i can't find a way to do this.Neither the Assembly.GetManifestResourceStream neither the My.Resources.ResourceManager.GetStream work.I already tried in various forms to pass the string name of the resource:
- AssemblyName.Resource.Ext
- AssemblyName.Resource
- Resource.Ext
- Resource
And none of them work. I created a simple app to test this and added a little img.jpg:
vb.net
Dim myAssm As Assembly = Assembly.GetExecutingAssembly
Dim myAssmName As String = myAssm.GetName.Name
Dim resor1 As String = String.Concat(myAssmName, ".img.jpg")
[code].....
In web service I have function that return bytes array. Now, I call it from VbScript and I need to catch result of this function. How I can catch result of this function in value that is gone be like a value that function return (bytes array)?
View 1 RepliesI have an old fashion Database with several files.I need to import to a new Sql Server dababase the data.There are tables with 6 Bytes numbers fields and we have no Number data type with that length.
View 15 RepliesI want to read 15 bytes of data starting at byte 40 and ending at byte 55. I then want the value of the 15 bytes of data to print to textbox5. I know this should be a simple task but I'm having a lot of trouble figuring this out.
View 10 RepliesIm currently making a program and I was really thinking about adding a simple hex editor into it (nothing really fancy). I know how to read/write/view bytes already but im stuck on how i will make the interface and stuff. Ive been searching google for hours and i cant find anything.
View 12 RepliesI have an old fashion Database with several random access files and I need to import the data to a new Sql Server dababase the data. There are tables with 6 Bytes floating numbers fields and we have no Number data type with that length in VB. I tried and tried and... and can't find. I found this code in the ERP folder, is AlphaBasic. It use an envoirement namend A-shell from Microsabio .
[Code]...
I have seen countless examples of reading standard output from command line applications which print text to the screen and one can read that back into the application as a string. I want to read the binary data back that is written to standard output from something such as image magick's convert program. What is coming back is an image, not a text result or error code. Is this possible? I have been looking for ages but found nothing that makes sense.
View 2 RepliesI need to do some operations that require converting array of bytes to string and the other way. After struggling with it for a few hours I found out the core of my problems. Look at this piece of [code]...
View 5 RepliesWhy does this programmer use a binary reader to read bytes, why not the client.getstream.read or streamreader?
Case RequestTags.Connect
'sent from server to client informing client that a successful
'connection negotiation has been made and the connection now exists.
[code]....
I am trying to write and read bytes from usb device.I have an array dout(8) of boolean say f,t,t,f,t,t,f,t representing switch states.I need to convert that to a variable DataOut as byte. 01101101 Later I read the usb device.This gives me a variable Data as byte 10110100 I need to convert that to an array DIn(10) of boolean t,f,t,t,f,t,f,f All my code attempts have failed.
View 2 RepliesI have successfully gotten the filestream function to read a text file and return bytes. I want it to return letters, not bytes, using random access.
View 4 Repliesi tried to get the string from binary file by using this code..
[Code]...
I am using sockets and such for a while now, and want to go an step further in this. Now for example lets say an client would send [lenghtofstringinbytes]string[somethingelseinbytes]another thing.
How can I send/read/parse it?
Now I am doing this:
Private Sub onDataArrival(ByVal ar As IAsyncResult)
Try
Dim obj_SocketState As StateObject = CType(ar.AsyncState, StateObject)
Dim obj_Socket As Socket = obj_SocketState.WorkSocket
Dim sck_Data As String
[Code] .....
So using Getstring for it, but thats not the way for this as you get nothing else but an empty string back. So I have to parse it without converting it to an string.
I have a timer control that sends data to a hardware every 3 seconds. I sent 6 bytes of data. In return I am expecting 8 bytes of data in DataReceived event. First time I send 6 bytes of date, in DataReceived event, I get the expected 8 bytes. Then in next 3 seconds, again the expected 8 bytes of data is received. But after that I find that DataReceived is fired 2 times: first time I get 6 bytes and then I get 2 bytes. After that I again get 8 bytes as expected. So in short, 2 times I get 8 bytes as expected and 6 bytes and 2 bytes and again 8 bytes. This pattern is repeating continuously. Why? Is there any reason why I cannot get all 8 bytes everytime? Note that the code is in vb.net 2008
Code in button btn_Start ()
'Set serial port parameters
x.PortName = "COM1"
[Code].....
I'm working on a project involving reading RFID tags, I've written the code and it reads the tags ok by using the recieved data handler and displaying the result in a listbox, the only problem is that the data displayed has a couple of unreadable characters at the start (I'm using ReadLine() command.)If I read the buffer byte by byte the data is all readable.How can I read and display the whole 16 Bytes in one go??
View 3 RepliesI'm trying to read bytes with 1200 interval for 100 times, but I can't get it working. This is my
Try
Dim fr As FileStream = File.OpenRead(OpenFileDialog1.FileName)
Dim data(fr.Length) As Byte
[Code]....
I need to read from offset 4896, then from 6096, then from 7296 for 100 times and for each interval add to the listbox.
I want it to do is that you input a string, then you select an algorithm (Theres only going to be one RijnDael) then you input a key, then the Initialization Vector comes from "txtIV.text" then you select the key bytes and the block bytes from the numeric up/down, then you either encrypt or decrypt.
View 1 RepliesOk i am having some issues designing a base-class to handle generics.Caveat is i need to restrict the type put in as a Numeric type, specifically Int16, Int32, or Int64 (Short or Long).I know you can do Of T as {Structure} but i dont want to select the key bytes and the block bytes from the numeric up/down.
View 2 RepliesI keep getting a ProtocolViolationException "Bytes to be written to the stream exceed the Content-Length bytes size specified." on the following code.I've tried setting Content-Length numerous ways with no success.
Dim url = "https://domain.com"
Dim req As WebRequest = WebRequest.Create(url)
req.Method = "POST"
req.ContentType = "application/xml"
[Code]...
how to read bytes from a file... but is it possible to read each individual bit, one at a time?
View 1 RepliesProbably missing something silly here, Her eis what my display looks like Sending image...(401303) I would prefer it displays as Sending image...(391 kb)
[Code]...
So how does one turn SSL on in System.Net.Sockets.TcpClient with VB.NET code?
Turning it on in System.Net.Mail.SmtpClient is easy, you set the .EnableSsl property. I cannot find a corresponding property in TcpClient. It's probably buried somewhere.
During development, we usually use localhost as the hostname, like the following
Dim serverListener As New TcpClient("localhost", 8585)
I want the user to be able to enter their IP address via a TextBox instead, like
Dim serverListener As New TcpClient(textbox1.text, 8585)
However, this is not working for me.
I am creating an application that will be talking over the LAN (and eventually, WAN) which uses the Tcplistener and Tcpclient objects.Now, I have this working absolutely fine locally using the loopack address although when I change the IP of the listener to 0.0.0.0 (listening for all IPs) and the IP in the client application, to the IP of the server, it throws an exception when connecting. The client says something along the lines of the the server has rejected the incoming connection. So i disabled all firewalls temporarily but I still have the problem.I have ran netstat on the server which clearly shows that it is listening for an incoming connection on 0.0.0.0. [code]
View 5 Replies
