I'm using stream reader to read some text(txt format) n show in textbox1. I want stop at the second last line to get the string.Below is my code:
path="c:dic.txt"Dim reader As New StreamReader(path)Do While reader.?? //how to instruct to stop when read until second last line,because i don't know how many lines in the text file??
I have a text file name list.txt which contains data like following;
AC-No. Name Time State New State Exception
100 ZULFIQUAR 09/04/2012 01:53 PM C/In Invalid
100 ZULFIQUAR 10/04/2012 01:39 PM C/In Invalid
100 ZULFIQUAR 11/04/2012 01:38 PM C/In Invalid
[Code]....
Radio button 2 beacuse there are 3 and you have to pick one (The right one) to advance on to the next form.
View 4 RepliesIs there a method of using the stream reader to read webfiles?
View 1 RepliesFrom few days I am doing efforts to read web pages using webbrowser control in my desktop application. But it is very slower than my expectations(because I want to read lots of pages in minutes and browser control reads almost one page in 5 to 10 seconds), what I need is to read two or three tags written in web page.
So finally I decided to use something, which can give me only source code of page. I think StreamReader will help me to read it. I am not sure if it is flaxible with my purpose, or something else is there which can give me only html source code of web page.
I have written this code to read html code, but it gives error.
Quote:
System.ArgumentException: URI formats are not supported.
public static string Navigate(string URL)
{
[code]....
I am trying to make my application read data from a file. Then save the data back. However I keep getting an error which says the file is still open so cannot be edited. I also read that there is an issue with the streamreader and streamwriter do not close the program straight away. I was wondering if anyone had a way around this or any alternative ideas. Heres my code so far!
[Code]...
I have a textbox1 and button1 and panel1 (which is used as a popup control)i want if textbox1.text="show" then modalpopup control whose id is panel1 will be visible on buttonclick event other wise .... modal popup control panel1 will not be shown ...how to do this ? using vb.net ?
View 2 Repliesi m using vb.net 2008.Example we have textbox1 and textbox2, question is how to show text from textbox1 into textbox2 but getting text line by line not all text from textbox1.
View 3 RepliesIs there anyway to take a static stream reader, and switch it to another text file based on the user changing the file?
View 1 RepliesCurrently I am saving data from my applications by saving a text file via a stream reader as a string. I have come to a problem. In my current application, I have an array of the following structure:
[Code]...
how would I accomplish saving a large piece of data, using the Stream Reader for the Line-by-Line, while keeping the carriage return line feeds in there?
[Code]...
Today I installed VB 2008 express and having some older experience with VB at school I tried to translate some algorithm functions to VB. I came across these lines which are very simple.I had one textbox and wanted to show The result is x when i click the button. so, here is the part of the program.
Dim x As Integer
Dim y As Integer
Dim w As Integer
[code]....
Because I write on paper in pseudo, "The result is", x would be correct and would show The result is x but instead, VB finds error. Does , indicate space here or does it recognise it as something else?
I'm trying to read in some text from a tcp stream. I know that the text has a unicode control character as the first character (0x0b) because the sending mechanism inserts it in front of all outgoing messages. I know it is an unreadable/unprintable character but would I would like to do is know how to read this character in and know that it is a 0x0b.
[Code]...
I am working on bit more advanced calculator, but I cant figure out how I can make my program to calculate textbox1.text and show the answer in textbox2
For example: (textbox1) 5*62+4
(textbox2)314
I'm not sure this question belong in this topic, but I don't know where else it should be?
What I am trying to do is stream write to a text file information from 5 columns I have in my list view and then read the data back into those columns as required. I have manage to write the data to the text file in this format
View 4 RepliesI want to add a condition when textbox1.text changes , the added text to textbox1.text is showed in another textbox.
View 6 Repliesis there anyway to make listbox1.item1=textbox1.text? or the first row of richtextbox1=textbox1.text?
View 1 RepliesHow can i get my key's value using a stream reader [code]
View 3 Repliesin an winForm app in VS2010 win 7 compiling to x86, I try to do what Alvas.Audio seems to work. See (c# ex: [URL] for reference.
Dim data() As Byte = wr.ReadData(second * i, second)
The result give me data.length()=0. I do not have any exception, I can read format from it and whatever reader I use I got this problem.EDIT : After some tests, it seems like the uncompressed file I create in the first step (in PCM format, with .wav extension) can not be recognized by the Alvas.audio library for the second step. I must miss something around Audio file markups or something alike.
Here is the code that might be the source (basically this is step 1):
Dim functOut As String = String.Empty
Dim wr As Alvas.Audio.IAudioReader = Nothing
Dim fs As IO.FileStream = Nothing
[code]....
How can I write the resulted stream to be sure I can read it again later?
I have a stream reader going into an array with a .split on it:
strNstring = sr.ReadToEnd.Split(New [Char]() {" "c}, StringSplitOptions.RemoveEmptyEntries)
If the file is set up like:
the
dog ran and jumped
in
the grassy
[code]....
Is there any way to set the split to fix this and just have them come in correctly?
The bigger problem is that I can't seem to get everything involving using stream writer and reader working. If I start of with a .txt file already correctly formatted then I can display it in the list box. But adding data during run time is not proving successful.
[Code]....
I've set up a stream reader to get data from a serial file, functionality for that is already set up.
My problem is that the program seems to be missing out every other line of code in the file, which kinda defeats the point of a serial file. [code]...
im trying to populate a list box from a text file using the System.IO.StreamReader class
and my code blows up right here:[code...]
The program dies at lstFilePreview.Items.Insert(Counter, ObjReader.Readline.ToString)and it gives me the "Object reference not set to an instance of an object." error.
im trying to use a 2 combo boxes each with a list of 7 cities these need to link up with numbers in a stream reader to give a total distance.[code]
View 12 RepliesI've got an application that reads a XML file via a stream reader. The problem is I can't edit my XML file and save it when others are using the application that is using the XML file at the time. how can i get around this?
View 1 RepliesI have been using the following Stream Reader code for over a year now to pull information from 3 websites w/ no issues. Recently my users are getting massive amounts of "Timeout" errors. I have opened a ticket w/ the IT department but they have not found any issues (we are experiencing off/on issues w/ our web traffic speeds in our department). Per the code I have the timeout set to 20 seconds but the Timeout error occurs in only a few seconds from the System.Net.WebException.
Imports System.Text.RegularExpressions
Imports System.Net
Imports System.IO
[code]....
I am downloading page data using the stream reader using readline.I want to concatenate each line into one long string for parsing The below line of code is not working: datajoined =dataline.Insert(datajoined.Length - 1, dataline.Length - 1)My inevitable goal here is to track stream data with a progress bar. But first I must learn to dload page data in chunks.
[Code]...
I'm trying to setup a simple app that reads a file and then writes the contents to another file using OpenFileDialog and SaveFileDialog. Looking at the debbugger it looks like it's reading fine, I can see the data I want written. Towards the end of my code I get the following error message:"Illegal characters in path". I've researched this error. I'm not using any illegal characters such as /\? etc and the pathname contains all alpha characters. I'm pulling the test file from the C drive and trying to save it there as well.
Path: C:\Test.csv
My code:
Private Sub btnAppendData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAppendData.Click
Dim Result As DialogResult
Dim FileContents As String
[Code] .....
Trying to fill listboxes from a .txt file, but I only get 1 line. How do I loop the stream reader until the Field(0) changes. My txt file looks like this: [code] The number goes into a combobox, the name into a label, and the rest into listboxes, so I I need all the Gross Pay for person 100 in a list box.I have a module that reads the file into an array PayRolls (), And so far this is my code for the combobox. [code]
View 1 RepliesI am new to Visual Basics and I am using Visual Basic 2008 express. I have been using video tutorial on line to learn VB and they are great in explaining what is happening the code vs. just looking at code. I think from what little I can find I would be using StreamWriter WriteLine and StreamReader readLine .I am using a couple of forms. I am looking for simple basic code to use a form as a way of modifying timer intervals and store the values in a single text file on separate lines.
Description:
Form1: will contain the main code that will run. It will contain some timers. I want the timers to look in a text file for their intervals. Each timer would be on a different line.
Example:
Timer1 interval would be located on line 3
Timer2 interval would be located on line 6
Timer3 interval would be located on line 20
Form2: will contain 3 textboxes. This is where when I load form2 I will also read the same values from the text file to preload the text boxes. I will now be able to change the timer intervals as needed and press a button to update the text file. The update button will also reload the new timer settings on Form1. This is very similar to how a CNC Machine works with Parameter settings. This can be useful for storing many different settings for a form that a user can modify and be stored and reloaded next time the program runs.