[2005] UnauthorizedAccessException Accessing Comm Port
May 3, 2006
I'm debugging a VB app where I'm using a comm port attached to a bluetooth radio paired to another bluetooth radio in order to communicate with a remote barcode scanner. The pair of bluetoooth devices basically work as a serial cable replacement. Sometimes it works fine, but after a while I get an UnauthorizedAccessException message which breaks the program (see attached jpeg).
I only get this when I use the radios and not when I use a direct cable. I wonder if it has something to do with other bluetooth devices nearby trying to communicate with mine. I've used the .NET Framework 2.0 Confuration tool to adjust the zone security to give full trust to MyComputer, so I don't think it has to do with security, but I'm really going beyond my area of expertise here. I don't know what's going on.
I have am using an XBee ZigBee wireless module to communicate with a project of mine. I currently have it set up to the point where I can open a hyperterminal session to COM 4 (which is the usb com port), and recieve the data that is being sent via the microcontroller on the other side of the wireless link.
I would like to make an app that takes the data and puts it in to a more user-readable format. (Via VB 2005) So far all I have come up with is some problems. It doesn't seem like I can use the built in serial port tool to access a "virtual" com port. From the following link:Quote:
Note You cannot use the Microsoft .NET Framework classes to directly access other types of ports, such as parallel ports or USB ports.[URL]..Do I have to use a "COM port redirector" to make it seem like a real COM port? Or is there some easy way that I am not thinking of?
I have been doing some research into accessing devices on a USB port and it's kind of helped, but not really. From what I understand, I can use the IO.Port namespace to access a device on a USB port (usually). Let me know if this is incorrect.
First, I made a simple program that looped through the ports available. I get COM1 and COM3, but I have 4 USB ports. Where are the others?
My Dim comm As New List(Of IO.Ports.SerialPort) 'list of comm ports For Each PNstr As String In IO.Ports.SerialPort.GetPortNames() 'get a list of Com Port Names
Basically I need to send the hex command FA through a COM port.
I have added the com port and set the baud etc and all seems to be working well there. I am just a little unsure how to send the correct hexadecimal command. For example,
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click SerialPort1.Open()
I currently have software that sends out plain text(i.e. 'X') to comm 1 port and was wondering if there was any way to capture that plain text and also respond to that port on the same compute as the port without having anything plugged into the machine (i.e. 9 pin serial cable). I am trying to avoid buy any more hardware as this is an objective to acutally cut down on hardware.
Now I know whats going to happen, I will post a request for code syntax and one of the admins is going to say that I need to post the code I already have. The code I already have is irrelevant to what i wish to do. So, continuing on; I have a micro controller that i wish to send commands to it in HEX data type. Communication is via the serial port RS232. (well technically its through the USB to serial converter)Steps:
1) Sending a "001" tells the micro controller to await instructions as to what to set the duty cycle to
2) The data that follows i.e." 050, 010, 185 " will be added to 400 (by the micro controller) to come up with a duty cycle based on a 10 bit resolution of 0-1024. I am only going to be using the range of 401- ~500.
I can communicate with the micro controller via hyper terminal. Using the Alt + #keys method I can transmit data to the micro controller, and this is what i with to do with vb.net.[code]
I have an older VB6 application which uses a scanner on the COMM port and does the following... (I have been tasked with re-writing it in ASP.NET (VB)...
OLD APPLICATION...
1. reads a Scanner and loads the data onto the PC
2. FTP's the data file to a SQL Server (where a small app picks it up and processes it)
I coded a very small website bot in C# using the default WebBrowser control. Actually almost everything is working the way it is supposed to work, yet I seem to have problems with the very last step of my automation.
The website was built using several iframes. This isn't much of a big deal as I simply access those frames and their elements using
This however does not work when the source of the IFRAME is being hosted on a different domain than the actual website. As I searched the internet for an answer to my problem I stumbled across an MSDN article mentioning this specific problem and they were referring to safety measures against cross site scripting which might be the reason for this error.
I couldn't really find a way of disabling this feature so I moved on and decided to recode everything to work with geckofx-12 instead of the default (IE based) web browser control, yet I ran into similar issues...
My question is: Is there any way I can bypass this annoying behaviour? I don't really care about security concerns or on whether geckofx or the default web browser control is being used, I would just like to programmatically access the elements of a site which is being hosted on a different domain without running into an UnauthorizedAccessException.
I did a search for "How do I implement Serial COM Port communications? and found a response by Xiaoyun Li which was last posted on April 10, 2009. Xiaoyun's response included sample code. My intent has been to get a clean compile on the sample code, then test it, then expand the code into a real application. I am down to a single error message, which I can't figure out how to resolve: "Method 'Public Sub DoUpdate()' does not have a signature compatible with delegate 'Delegate Sub EventHandler(sender As Object, e As System.EventArgs)'." [code]I marked where the error occurs in the code with *** to the right of the error line.The code is attached to a simple form, Form1 which contains a single text box, TextBox1.It appears to me that the code needs a Delegate statement, but I can't figure out how to code it or where to put it.d.
I am getting scale values from a comm port into a richtextbox control, now as long as the connections and the scale is working great scale readings continuously flow into the control all the time, however when the connections or the scale is turned of the label that displays the weight will give a message saying error.
After 5 seconds I want to be able to give the operator the choice to take scale readings manually. This is my code so far.
Private Sub tmScaleTimer_Tick(sender As System.Object, e As System.EventArgs) Handles tmScaleTimer.Tick If rtbDisplay.Text.Length = i Then
[Code].....
how do I restart the timer if the interval has elapsed
I am writing a VB.NET app that has a piece which needs to send a small command to comm port 2 and get the return result. The problem is .NET doesnt have any support for serial communication seems like.
I just need to send the command "headtype" and get the result.
I am using VB.NET 2008 Express Edition to access Serial Port which is a USB to Serial port. Since this is removable, the app user can disconnect it at any time in app. I am getting an unhandled exception when I remove the USB Serial Port.
I have recently developed a serial port communication program to access my hardware firewall and its connected to the device via a converter usb to rs232head plugged to a rs232 to an ethernet cable. this ethernet cable then plugs into the device console port.
my program functions similar to that of TeraTerm. an opensource hyperterminal program written in C++ but i decided to do one for vb.net
Alright to cut the story short, i have successfully coded out the program to accept incomming data from the device but however, i'm also receiving ansi escape sequence along with it and i have no idea how i could implement codes to remove these. i have spend 3 weeks trying to look for vt100 emulation codes written in vb.net but i found none so far. most are written in c++. here's an image to illustrate the problem which im facing.
The image below is a screenshot taken when the i ran both the programs together. The bottom is tera term 3.1 and the top is my vb project which i made using msdn's example and improved on the codes. basically tera term was able to interpret those escape sequence and display accordingly to that of the vt100 terminal display. I have spent time reading on regular expressions using the inbuilt function regex in visual basic and tried parsing some strings but its not working. i guess its far more complex than i thought.
I'm currently working on a project where I am transmitting data from a comm device via the serial port and resorting the raw data (in binary) to its respective ascii values. The problem I'm facing is determining the most efficient method to accomplish my goal. Essentially, I have 68 bytes coming in, the first and second bytes represent the page and packet number and the data itself ranges from 3 to 64, the remaining for my checksum.
What I am needing to do is, grab 50 consecutive bytes per variable in my array, and that is where I'm confused. I have easily pulled my 3-64 bytes and stored that data to a string. I just don't know the most efficient method to accomplish my goal. Should I write directly to file all my data, as there are like 8 pages, of 128 packet data. [Code] I can capture the the first 50 by using a for-loop easily, but what would be the preferred method to track what data chunk I've taken? The more I think about it, I think I may just want to write to file, all my data, and then just take them back to back in 50 byte chunks. Is that the most efficient method?
I am new to this forum as will as to VB. I am using VB6. I want to access the USB port in order to read the data at the USB port comming from my Data acquisition card.Or as a matter of fact can I also access the data from my mouse, because it also transmits the signal when ever the mouse is moving.
I'm having some issues with a game I've been writing for several years. It's an on/off project and recently I purchased a new computer and formatted my old computer so all of my installations of windows and visual basic 2005 (express edition) are fresh. I'm getting the following error:
Is it possible to add, edit, view and delete records using a file only (instead of a database) and .Net 2005 (VB.Net/C#)? The concept is that a file that'll work more-or-less like a database. One can add, edit, view, delete and query data to and from the file. The file, either cannot be opened directly or data inside the file should be in some encrypted form so that even if the file is opened no one can comprehend it. Data inside the file can only be manipulated by a front end application i.e. .Net 2005.
I have 10 threads each using the same sub to do work. This sub is calling a function to save the results. How are the threads accessing the sub? Is each one getting a fresh copy of the sub to do its thing or are they using the same piece of code and need to wait for each other to finish processing? I don't get any hits when searching for such a specific scenario. I am wondering because it is about using sockets (usually lightweight stuff) to retrieve a resource and the cpu is working at 100% all the time. Still it is very fast, 900 internet queries finish in about 3 minutes.
I am trying to programatically use my SQLdatasource in my code behind so that I can select a certain field from a table based on the selectedindexchange event of a listbox control on my form. I have one datasource already set to the listbox control but i want a seperate datasource to select a field based on the value of the listbox. I declared a new datasource sqlDataSource2, set the connectionstring to the same database/table and i have the following line set for the select statement
I have an issue with am access database source located on a remote computer.I tried using ADODB to access it, it works, but when I change( update insert or delete) the database on the remote computer, the changes is not reflected in my application
I have a small databse program. Form1 uses the Private Sub OpenToolstripmenu to Openfiledialog box and creates a connection and adapters. I need a second form that will access the same connections and adpaters what is the best /correct way to do this? Also other sub functions on form1
My problem is that i have a usb-to-serial device which creates a virtual serial port ( Com 4 for example )on the computer i need to connect to it and get the data stored on it I already have worked out how to use the System.io.ports to connect to the port ( baud rate, stop bits, parity ,ect) and it connects to the usb fine. But once the connection is open i don't know how to retrieve the data. Everything i have tried relies on events. But as the usb does not send data i don't know how to access the serials memory.
"Getting a list of system tray icons/programs has been a thorn in my side for the past year can get the list as long as explorer is running, but the second explorer is closed, the list will not populate. I'm frustrated beyond belief that I can't find the proper API calls to get the information. If anyone knows how to do this, PLEASE share it here!! I know it is possible, because other shells do it. -Ray"
