If certain conditions are met within a given subroutine, I would like to execute two other subroutines. Note that the other subroutines I want to call/execute "handle" a lot of events
vb
Private Sub S2_Enter (ByVal sender As Object, ByVal e As System.EventArgs) Handles S2.Enter
If upltschanged = True Then
[Code]....
I am working with a datagridview and 2 text boxes.TextBox 1 is for entering time of the day and TextBox2 is for entering time duration in that order. After TextBox2 looses focus I am converting the times into index numbers in my DGV1 and filling the selected indexed rows with some data. The data then is checked and if there are issues message is display prompting the user to correct it. However, all my codes for checking the data and selecting options are in the DataGridView1 event handler:
Private Sub Datagridview1_MouseUp(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles MouseUp
Is there a way to execute one Subroutine from another Sub. Sort of simulating a mouseup click programmatically ? Correction: there are 7 sets of those TextBoxes representing 7 days of the week. I am trying to avoid duplicating all that error handling codes in all 14 boxes. I have read that MouseEventArgs are protected so it may not be easy.
I need to make a subroutine run continuously in VB 2008. Can I make a button permanently on? If this is possible, how can I do this? I can put all of the subroutines I want run inside the button click class.
View 9 RepliesHow do I configure VB.Net to only show one Subroutine or one procedure at a time rather than Full Code View. Right now I see all code with separator lines between subs and functions. The was and Option in VB6 but can't find it in VB.Net.
View 5 RepliesI have a BIG piece of code that looks like this: Public Sub mnuNew_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mnuNew.Click ' Lots of code End Sub I need to execute this subroutine from another part of the same form's code. This should be fairly simple but I haven't been able to figure it out. How do I do this?
View 2 RepliesI have a sub in which I call different subs, depending on a value I pass through. It works fine for all but the last one. It executes the sub I call but then comes back to the first sub and runs the second one again
[Code]...
I'm trying to execute a SQL command, but I just can't find out why this is not working. This is how I defined the "execute" function in my class named "clsSQL":
[Code]...
Probably, I just need another pair of eyes, 'cause I can't see what am I doing wrong Could this be related to the database and not to my code?
So, I want to execute a javascript on WebBrowser1 when I press a button. Normally, I'd just navigate to the javascript to execute it. Like this:
Private Sub WebPageEditorToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles WebPageEditorToolStripMenuItem.Click
WebBrowser1.Navigate("javascript:document.body.contentEditable='true'; document.designMode='on'; void 0")
[Code]....
This makes it where I can't leave the website and it keeps me on that one website. But the problem is that navigating to the javascript is not like [URL] so it won't let me execute javascripts that way. So, basically, my question is:
Is there any other way to execute a javascript with Visual Basic 2008 without navigating to it?
Imports System.Data
Imports System.Data.SqlClient
Imports System.Configuration
[code].....
i seem to be having issues with my simple count down project. The count down work how I want it, there is also a pic of a rocket that move up when the count down button (Button4 - the form was set up in class as a quick example, so there was no need to name the buttons) is pressed. The problem is that the count down "10....1...Blast Off" shows after the rocket has moved up, I want the countdown text to show, then the rocket to move.The countdown is outputted to a ListBox.Here is my code thus far: (I have re-worked is a bit, starting to look messy)
[Code]...
I am not sure if I should be doing it as a function, that was just one of my attempts to get it to output everything in the right order.
i am using vb.net 2008 and msaccess i have given the following query to fill a dataset but it is giving me an error. mCmd = " SELECT OfficialInfo.*, "
[Code]...
I wanna know how could I do to:Assemble a finished program, install it, and leave it executing in second plane to just push a key to work. Execute it once at the windows start and execute just a single key to make it work.I'd like to know what should I put before the assembly
View 5 RepliesWhy am I getting a request to configure DAO when I start a program I am developing in VS 2008? After I execute several cancels, the program runs fine.
View 1 RepliesI've created a program that creates a registry value when it is run, and when this program is uninstalled I need it to remove this registry value if it exists. So I wrote a little command line VB.NET program that simply checks for the reg value and removes it if it exists and I added this to the Uninstall section of the Custom Actions tab in the Visual Studio deployment project that I created for this app.
I know that the command line app works because if I run it myself manually it deletes the registry value, but when I uninstall my application it does not remove the registry value so obviously this command line app is not being executed.
Ok I'm creating a sql query with a string variable and executing it in vb. The string would look something like: Insert Into Table (vara,varb,varc) Values ('vara','varb','varc') This works fine.
[Code]...
I have published application before and they all (3 setup files) work fine. The problem is I don't know anymore how I exactly did it. Now I am trying to publish another form which has a connection to my sql database. The publishing goes fine: publishing folder is: C:Movie-databaseApplication 4 and installation folder is the same, and I therefore leave it empty. Application is available only online. But when I execute the published setup.exe I get two windows with no info about the error: see attachment.
View 3 RepliesI have published application before and they all (3 setup files) work fine. The problem is I don't know anymore how I exactly did it.Now I am trying to publish another form which has a connection to my sql database. The publishing goes fine: publishing folder is: C:Movie-databaseApplication 4 and installation folder is the same, and I therefore leave it empty. Application is available only online.But when I execute the published setup.exe I get two windows with no info about the error: see attachment.
View 12 RepliesI'm trying to create a program that does the following:Executes the following command line string (wmic /node:computername bios get serialnumber)Prompts user for the "node" entry Displays the resulting serial number in a dialog box I'm a bit of a noob at this (I haven't coded anything in VB since early 2000s) so I'm at a bit of a loss where to start. I plan on including some functions to submit the node entry and the resulting serial number to a database in the future for archiving as well.
View 4 RepliesHow can I make the webbrowser control wait until a page finishes loading before continuing on to the next lines of codes?
View 2 RepliesIs there a command in vb that can be used to pause a routine to give time for the form to show before the routine starts as my routine is running and completing before my form shows up?
View 13 RepliesI am using Visual Studio 2008 to try and create a calculator program that can convert binary to decimal. I have some code but I'm having problems figuring out what to write as an "argument" when I was to call the function.
Here is the code I have so far.
Public Class Form1
Private Sub btnCalculate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalculate.Click
[Code]....
I have created a .NET assembly, clicked 'Register for COM Interop' on the properties page, strongly named it and compiled it. Then I GAC'd the .NET DLL manually. Calling the .NET assembly from my VB6 code with 'CreateObject("MyNETProject.class1")' gives me an automation error. I've gone through about 3 iterations of this for most of the day and cannot sort out what I'm doing wrong. I have a feeling it's got to do with my .NET assembly settings and GACing but it all seems right.
View 3 RepliesDo not care to stay at these forums when criticized by other members.
View 6 RepliesI am using the following method to evaluate a script at runtime:
vb
Public Function Build(ByVal vbCode As String, Optional ByVal CallFunction As String = "Main") As Object
[code].....
with access 07 + vb.net...i am calling an access Query ....the Query which uses a user defined PUBLIC function in access module...the problem is i am getting an error as "Undefined function 'DecideSON' in expression." in fact DecideSON is a function in the access database module?
View 2 Repliesim in need of calling a function in another process, now from the last couple hours of digging ive found out that i need to use createremotethread for that, problem is - it has a bunch of parameters i dont know how to fill, especially the address part. I tried using getprocaccess and getmodulehandle for that but i dont think they return what i need.
View 9 RepliesI have 2 forms FORM 1 and 2 i got this code in form 1
vb.net
Private Sub starauto_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles starauto.Click
form2.Button1.Value = True
form2.Button1_Click()
End Sub
but both examples give me an error
error 1.- 'Value' is not a member of 'System.Windows.Forms.Button'.C:Documents and SettingsleijaiMy DocumentsVisual Studio 2008ProjectsIp On or OffIp On or Offform1.vb239Ip On or Off
Error 2.- Error3Argument not specified for parameter 'sender' of 'Public Sub Button1_Click(sender As Object, e As System.EventArgs)'.C:Documents and SettingsleijaiMy DocumentsVisual Studio 2008ProjectsIp On or OffIp On or Offform1.vb249Ip On or Off
error 3.- Error2Argument not specified for parameter 'e' of 'Public Sub Button1_Click(sender As Object, e As System.EventArgs)'.C:Documents and SettingsleijaiMy DocumentsVisual Studio 2008ProjectsIp On or OffIp On or Offform1.vb249Ip On or Off
i am trying to use a login form that is used to login after you select one of 7 forms. this login form calls a function that validates then it calls another function, if it's true, that will load the appropriate form.
here's what i have.
vb.net
'Here are the appropriate variables
Public FormName As Form
[Code].....
Is is possible to do something like:TextBox1.Text = Replace(TextBox1.Text, ".*", "", 1, , CompareMethod.Text)
View 9 RepliesIs there a way to call or pass a variable to another sub? I'm trying to reterive a variable (or even a field name) in somethign like this:
Private Sub PrintPageHandler(ByVal sender As Object, ByVal args As Printing.PrintPageEventArgs)
args.Graphics.DrawString(RS("field1"), New Font("arial", 8), Brushes.Black, 5, 5)
[Code].....