I want to loop through all the controls on a "panel" and bind them to a datatable. I'm finding it hard to detect the "end of the panel" - as I also have group boxes and such on the panel. At first I was using the "parent" control - but that doesn't work with group boxes.
[Code]...
I have a BackgroundWorker and the DoWork event, calls a function called "JustMe", it executes a loop to make visible all the controls on a panel, but does not work vb.net
Private Function JustMe As Boolean For Each ctr As Control In Panel1.Controls ctr.Visible = True Next Return True End Function Private Sub BackgroundWorker1_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
JustMe()
End Sub
My DataGridview already binded to Datatable dt1 DataGridview1.datasource = dt1 and i want to add another Datatable dt2 into datagridview after 20-30 minute and want to keep dt1 as well as in the datagridview ..How i can do that..
View 4 RepliesI am rather irritated at this. I have no clue why looping through controls on a form and in groupboxes leaves out 75% of the controls.
Here's the code I have:
Dim settings As String = ""
Dim gbControl As Control
Dim gbbox As Control
[Code]....
I want to have setting save all settings to an ini file, and not have to reprogram the saving routine when I add a group box or control. At random times, any number of controls can be disabled, checkboxes can be checked and unchecked, radiobuttons can be checked and unchecked. Regardless of the state of the control, I want the control to show up in the loop. But they don't. Only controls that are enabled and only checkboxes that are checked, every other control state is ignored. That's crap, and is definitely not what is needed by any programmer of any type. We're capable of determining if a control is enabled, hidden, checked, visible, and otherwise.
How do I get the controls to be included in the loop regardless of their state?
For Each Ctrl As Control In Panel20.Controls
If TypeOf Ctrl Is CheckBox Then
CType(Ctrl, CheckBox).Checked = False
ElseIf Ctrl.HasChildren = True Then
Uncheckboxes(Ctrl)
End If
Next
I have a few panels that contain the controls, how can I check them all at once rather than use that code above and just change the panel number each time? It'll get pretty messy if I have to keep pasting all that code and just changing one number.
When a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
I am trying to access controls that were added to the form and created code all before I added them to a panel. Upon form loading I create the form handle into a dictionary. then I call that dictionary ID and add data to the controls. I can't seem to add data to the controls inside the panel.. I think it is something simple. I may just be over looking the method I need to call.
View 11 RepliesI just discovered the DataTable.Select-function, and boy I'm glad I found it! It makes my code run several times faster. But, I don't quite understand why it's so much faster than my previous code. In my first code, I looped trough my DataTable to find the specific row, like this:
[Code]...
I can't use the normal method, my controls (picture boxes) names contain numbers such as 00, 01, 02 etc which corrispond to my multidimenional array.
I'm attempting change the picturebox's values in a for loop via the counter in the loop, for example:
For i = 1 To 4
PictureBox(i).enabled = False 'Picturebox1 will be the first one(counter starts at 1)
Next
I basically need to access each one as I would with an array, I can't type the full names out, can only refer to them via their names + counter number because I don't know what control name I would be dealing with at that time in the loop.
I am trying to display value of the field ("UserID") for every row exists in datatable to checkboxlist(make the checkboxlist item selected).
I used for loop, but only the field value from last row of RoleUsers table is selected in the checkboxlist.
Here is my code
Private Sub DisplayRoleUser()
Dim conn As SqlConnection
Dim cmd As SqlCommand
[Code].....
I have a data table (cv_dtPools) that contains six columns.I only want to load two columns from cv_dtPools into CheckedListBox.I want vchQCID to be the DisplayMember and "intQCPool_PK' to be the ValueMember. When the user is done selected the items in the CheckedListBox they will then click a button.The code behind the button will then collect the ValueMembers (intQCPool_PK) and put them in another data table which will be used by another procedure.How can I get only the two columns of the data table into the CheckedListBox? [code]
View 2 RepliesI try to bind a textbox to a datatable but i cant.. I checked if the datatable is filled (it includes the results of a sql query)and it s ok.. i can depict the result in a combo box but not in textbox. I wait for only one result that s why i need textbox instead of combo.. that s my code..
[Code]...
I want to insert into a checkedlistobox all the coloumn from a datatable
what is the easiest way to do that, possibly without use loops?
i tried to use CheckedListBox1.DataBindings.Add(...) and CheckedListBox1.Items.Add(...) but without success..
I would like to use a DateTime Picker control to allow my users to select amongst dates and hours specified in a dataTable. I think I will have to use two DateTimePickers one for the date and one for the hour. The hours shown will depend on the date selected. How can I bind the DataeTimePickers to the dataTable?
View 1 RepliesI'm binding listObject to DataTable. How can I find a data row in data table by object list row?
View 2 RepliesI have a datetimepicker
and i have a datatable and as datasource acces
in the datatable i have colums named........ day of week , day, month, year
what i want is ... when i select a value in datetimepicker
i want to find the row with the value in datatable
me how to bind the dataTable to dataGridView??
View 5 Repliesi am created Window based application .
i want to bind datagridview source to datatable .
whenever i write
Dim dt As datatable
dt = dgvtest.datasource
Error occur ?
In VB6 I could embed a panel or picturebox containing controls or images within an outer panel or picturebox. If I moved the outer control then the embedded panel would move with the outer panel and stay in the same relative position, which is what I require. This doesn't seem to happen in VB.NET, the internal panel stays fixed in its location, even if I have pasted this panel within the outer container. Is there are trick to this or do I have to code to get the internal panel to move with the outer one? How does an internal container remain embedded within an outer one?
View 4 RepliesMy problem is that i have two frequently updating DataTables and both of them must be showed in two DataGridView and in .XLS file.
As i understand i cannot make .XLS file without calling New Excel.Application
So i open New Excel.Application, create two datasheets - for each datatable and close application..
For DatagridView i use [code]...
What I want to achieve is to Bind just some of the properties of a Control to a DataTable object.Let's say I have a Label on the Form : "MyLabel1".MyLabel is a Class that inherits from Label and adds a property "ID", an Integer, to the base class.
I want to Bind .Left and .Top properties of MyLabel1 to a DataRow in my DataTable, and I want to see them updating, everytime I change MyLabel1 location on Form. I put description and full code, so everyone can test it in minutes :
I have :
--> A Form, with a DataGridView "DGV" : The DGV is for showing at real time the desired properties of the controls I want to bind ( in this case, just one control : MyLabel1 ).
--> MyLabel Class :
Public Class MyLabel
Inherits Label
Private m_id As Integer
[code]....
Like how do I make a drop down menu populate with the data from a connected database? And how can a label pop out on a form from code that has to do with a database? Last, how to add data to a database from saying "yes" to a messagebox that was coded?
View 1 RepliesI have the following XML file:
<?xml version="1.0" encoding="utf-8" ?>
<root>
<Language code="0" control="form" attribute="text">
<NL>Upload expansies</NL>
<UK>Upload expansions</UK>
</Language>
[Code] .....
I would like to bind the text between the NL or UK tags, based on a setting, to the control with the name in the attribute "control".
I started with this:
Dim xf As New Xml.XmlDocument
xf.LoadXml(My.Resources.Languages)
I am thinking I need to do something like a search in the xmldocument for the specific control, then get the text from the children.
I have aspx form with several textboxes.They are populated with values from a table via retrieval of a dataview.If the row count for the dataview is 0, then I'd like to reset the values in all textboxes. How can I loop through all the textboxes and set a default value?I've tried the following, but no sucess.
For Each ctrl As Control In Page.Form.Controls
If TypeOf ctrl Is WebControls.TextBox Then
CType(ctrl, WebControls.TextBox).Text = ""
End If
Next
My first For Loop was using Page.Controls but it returned only 1 count.The textboxes are inside a tabpanel (ajax), so do I have to locate the tabpage and then find all it's controls (for each tabpage)?
I'm trying to populate the list of a combobox by binding it to a datatable. Also, I want the selected value of the combobox to be bound to an object property so that when the selected value changes, it's automatically updating the object. However it's causing an error at runtime: "This causes two bindings in the collection to bind to the same property.
Parameter name: binding" I thought binding the dropdown list to a datatable and the selected value to an object were different properties but obviously I'm not getting it right.
Code:
Private Sub PopulateSiteSelect()
With Me.PlanSiteSelect
If _Plan.PlanID <> Nothing And _User.UserID <> Nothing And _Plan.Category <> Nothing Then
[Code]....
First I have 2 tables, for example Customer and Orders, and in the database there is a foreign key relation between both. For clarity Orders have a foreign key field to the primary key of Customers, thus Customer is the parent and Orders is the child table of the relation. My application is a Windows Form application, and I add a dataset to the project, in which I drop the 2 tables, and the relations between the 2 tables is automatic added. Now I will om a form loop through the Orders table (witch is the Child table) and show in a textbox some fields of the Orders table and also the Name field of the related record of the customers table. Regarding binding a textbox fo a Orders field I do it this way,
Dim myDs As New DataSet1
Dim myAdpCustomer As New DataSet1TableAdapters.CustomerTableAdapter
Dim myAdpOrders As New DataSet1TableAdapters.OrdersTableAdapter
myAdpCustomer.Fill(myDs.Customers)
myAdpOrders.Fill(myDs.Orders)
Dim myBindingSource As New BindingSource
myBindingSource.DataSource = myDs.Orders
myBindingNavigator.BindingSource = myBindingSource
TextBox1.DataBindings.Add("Text", myBindingSource, myDs.Orders.OrderIDColumn.ColumnName)
But now I can't find how to bind a textbox to a field of the Customers table witch is the Parent table of the relation.
I just need to get the selectedvalues as well as ID for dropdownlist in a panel
how to loop dropdownlist in a panel in ASP.NET?
For i = 0 To pnl.Controls.Count - 1
Dim ddl As DropDownList = CType(pnl.Controls(i)., DropDownList)
test = test & "[" & ddl.SelectedValue & "]"
Next
Question 1: This loop works when the Panel only consists of CheckBoxes. But I would also like to have som TextBoxes in the Panel. When i add a TextBox to the Panel I get the error message:
For Each c In Panel0.Controls(): Unable to cast object of type 'System.Windows.Forms.TextBox' to type 'System.Windows.Forms.CheckBox'.
[Code]...
i have a panel in which i have some controls like label dgv and textbox and picturebox in my application in certain situation the panel re-sizes and and all the control lose there default location which is then be used is their any when panel get bigger or smaller the controls stays where they are...
View 8 RepliesI am trying to dynamically add checkboxes to a panel depending on if a file exists. My code is:
While d1 <= d2
If File.Exists("C:\bnb\" & m1 & "-" & d1 & "-" & y1) = False Then
rm1CheckBoxes(rm1I) = New CheckBox()
[code].....