Using VB.NET 2008 desktop project, I created a simple tooltip on Form_Load event and attached it to a button on the form. Looks great when user hovers over button but times out after 30 seconds (which I set using popup delay etc.). But once it fades out, the second time user hovers over the button, the tooltip never shows up. Almost like it dies a natural death!
I have a PictureBox that goes to a link when clicked, and it has a tooltip set to it. Everytime I run my program, the tooltip won't work unless I click the picturebox and go to the link. Is there anyway to make it work without going to the link first?
The code I use for the tooltip @ picturebox. Private Sub PictureBox4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PictureBox4.Click ToolTip1.SetToolTip(Me.PictureBox4, "Google") System.Diagnostics.Process.Start("www.google.com") End Sub
I have a datagridview that displays text from a cell in a tooltip when text is too long to be viewed in the cell itself. The default length of time, however, is not long enough for me to read all of it.
How can I make the tooltip display for a longer period of time?
The maximum value that works for AutoPopDelay property of ToolTip is 30 seconds (30000 milliseconds). Any values greater than this maximum will be defaulted to 5 seconds (5000 milliseconds).[url]...
How to set to extend the duration show time for ToolTip? or alway show until the mouse leave the control?
Does anyone know if it's possible to skin the tooltip window so it looks like: Attachment 2448.Instead of the yellow box or the balloon like it does now?
I have a form which has many textboxes on it, some are dynamically generated and some are not. They structure is something like this:
[Code]...
Is there a way to create a collection of all of the textboxes so that I can access all at any time? Like when I need to clear them, or when I need to compare them. Right now I either access them one by one, like textbox1.text or I run a loop starting from the main flowlayoutcontrol, going inside, testing if control is another flowlayout, then going deeper and so on. Seems like there should be another simpler way to do this though, is there?
i have to send a time sheet to my work each week. which i do in word. what i want to do is be able to open my word document keeping the exact same format, tables must be the same, allowing me fill out the timesheet in my vb app, i could make life so much easier doing this. because i have alot of functions i could add using vb to make my life so much easier.
I have developed a system which i want my client to use for trial purpose for 1 month. i want a software or an idea to time the system for that period after which it should cease to work.
So i know this is more Math related but it would make life so much easier. What i want to do is enter 2 times into 2 text boxes and then subtract them from eachother to find out the hours inbetween as a decimal.
I have 3 check boxes on a form and am trying to code them to change the font in combinations of Large Font,Bold Font, and underline font.I coded the bold font check box and large font check box but cannot get the Bold and large font to work at the same time.
If urlQueue.Count > 0 Then Debug.Assert(currentFarm.isBusy = False) Debug.Assert(currentFarm.WebClient.IsBusy = False)
[CODE]...
The commented code won't work. That's because by the time the thread start, the variable currentFarm have changed. So I create a new function and cache the currentFarm in the function parameter. No there will be a cache of currentFarm address (object is always a pointer) on a stack and that address is the one being passed to the System.Threading.Thread constructor.
i am trying to create a list of list in that i would like to work on multiple accounts at the same time. lets say i have 5 accounts. every account has a seperate name. each account has a few fields. so i though of having a list of bookkeeping (with 5 accounts) and a list of accounts (with expense, income, tax, status, etc as fields). [code] and if the idea of using list of list works how do i loop through both lists.
I have an ASP.NET application with a SQL Server back end. I am storing all my dates in UTC format and doing the appropriate conversions to the local time zone of the browser viewing it. One of the pages asks for a start date and end date (no times).
I am taking the start date and setting the time to 00:00:00 hours (midnight) and I'm taking the End time and adding a time of 23:59:59, so that the date range covers the whole day. Now what I'm trying to do is do a SQL query to do a search for records in this date range. The problem is, the data in SQL is in UTC time and the user is typing their dates and times in their local date and times. My quickest solution was to convert the date and time to UTC, then search the records. However, by doing this, I am to believe ASP.NET converts the given time and date to UTC based on the server time zone. How can I convert a date and time to UTC time based on the time zone of the user?
I found that when group by multiple values does not work well with VB.NET, but it works well with C# ,here are my code, is there something wrong with my VB.NET Code? Here is my VB.NET code:
I've got a ToolTip showing when hovering over a row in my DataGridView - Works great except for the ToolTip flickering when over a row that displays it.
Is there a way to have one specific row in a DataGridView have a tooltip? So when the user put there mouse over the row, anywhere on the row, the Tooltip would PopUP?Would like to be able to do it at runtime?
I have two vb2008 programs with tooltips and on one of the programs, the tooltips re-appear after timeout without having to go to another tooltip and on the other program, after timeout, the tooltip will not re-appear without going to another tooltip. I can't find any differences in the tooltip setup that would cause this to be so. I have seen a couple of posts that are close to this, but it appears that they have just given up and did a work around. Does anyone have an idea or a solution?
Is there a way to programmatically change a tool tip once it has been set in the IDE properties or in other words, at run time? I want to change the tool tip data for each customer that is selected in a combo box.
how to use a ToolTip on a UserControl? I have a UserControl with some TextBoxes on it & I am adding the UC to a panel on my form at runtime. Now I want to set the ToolTip text for one of the TextBoxes, but I can't figure out how to do that. I have added a ToolTip component to my UserControl at design time.
I assigned a tooltip in my forms, I want it to show up everytime the form is minimized and hovered by a mouse pointer. These forms I am talking about are MDI Children.
I have an application that requires data be entered, and after entering, a button is clicked to process that data. Clicking the button works just as it should--the data is processed properly. In constructing a test module, I provide a set of data values, followed by:
btnWhatever.PerformClick()
Nothing happens. I have used this syntax for years, and it has always worked flawlessly. I have triple checked everything else and isolated the problem to the failure of the PerformClick(). The PerformClick() is in a test subroutine that does nothing but fill textboxes and labels with default data, then calls the PerformClick() on the button to begin processing. Again, the button works fine, the data is entered as it should be, but the PerformClick() does not fire the click event.
I have a form that works on my local Machine I created into. I have Office 2007 on this machine. I created the Form with the Excel 12 Reference. I move the Entire conetence of the Project folder to my work computer. Which has Office 2003. Do I need to recreate the form with the Excel 11 reference. I could not get the form to work on work computer. IT has a com error. I am acessing the EXE for the debug folder w/in the Bin Folder.
I am currently programming within Visual Studio 2008 with VB.Net. I have been asked to add a tooltip to the upper closing button (the 'X' in the top right of the form next to the maximize and minimize buttons).
First I added a ToolTip from the toolbox to my form. I didn't have to disable the tooltips for the minimize, maximize and close and it usually doesn't appear. I then used @Saman function with one minor change:
Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message) If m.Msg = 160 And m.WParam = 20 Then ToolTip1.SetToolTip(Me, "Save and Close")
[Code]....
As you can see instead of using his ToolTip1.Show() I used ToolTip1.SetToolTip(). I found with the show it worked infrequently, yet with the setToolTip it set the tooltip of the ('X') close button to my new text ("Save and Close") and thus it shows up whenever my mouse goes over the close button.
I am using Visual Studio 2008 (with focus in VB.NET). I want to add tooltip to the menu items in the menus I have created.Now I know that menu items have a property call tooltip and if I type text there, tooltips are displayed. But I want to use tooltip control for that because it gives me flexibility of changing colours or adding a heading to tooltips.I was able to bound tooltip control for controls on forms like button, textbox etc. But how can I achieve the same for menu items. Basically I want that my tooltips for menus have a heading also and If I want I can change colours.
2- How Can I Save Sitting in The Same Folder Of My Applocation ? I think that : User Sitting Reset to it's default When the user copy or move the application from folder to other App. Sitting ReadOnly i can't save it when the user change it so what is the solution ?