.net - SDKs Or Commandline Tools To Convert DOC And TIFF To PDF?
Jan 13, 2011
I've been working on a project that converts several file formats to a PDF in VB.NET/C#. The specific files are DOC, TXT, JPG, TIFF, HTML.
Actually I already have a solution for DOC/TXT to PDF using Bullzip PDF Printer by sending the files to the PDF Printer using VB.NET. However, each time it converts a file, MS Word opens and then closes once the file is sent to the printer. It really slows down the process.
As for TIFF to PDF, I haven't found a solution for it at this time.
I require SDKs or Commandline tools and not PDF convertion applications, since I need to integrate this function in my program. I prefer free or open source SDKs but commercial ones are accepted as well.
View 1 Replies
ADVERTISEMENT
Jul 29, 2009
I am attempting to make a VB commandline application, I did originally write this as a form application. Our server administrator wants this as a commandline application, so I have done the following code:
Imports Microsoft.Office.Interop
Module Module1
Sub Main()
[code].....
View 1 Replies
Jan 23, 2009
I'm trying to convert a .bmp into a TIFF. Here's my attempt:
Bitmap bmp = new Bitmap("C:Documents and SettingsAdministratorDesktopDoc Folder\_f.bmp")
bmp.Save("C:Documents and SettingsAdministratorDesktopDoc Folder\_f.tif", ImageFormat.Tiff)
It doesn't work. Debug feedback:
Name 'bmp' is not declared. (BC30451)
Method arguments must be enclosed in parentheses. (BC30800)
'Bitmap' is a type and cannot be used as an expression. (BC30108)
[code]....
View 3 Replies
Jul 31, 2008
convert pdf to multipage tiff?
View 2 Replies
Mar 8, 2012
I am writting a VB.Net application. I need to be able to convert either a Word or PDF file to TIF format.
View 4 Replies
Jun 21, 2012
I can use to convert several thousand PDFs to TIFFs. Free would be great but willing to pay if the cost is within reason.One requirement that many of the tools I have researched seem to miss is that I need to be able to do this in memory.I am working with PDFs that are stored as binary in a SQL database so through SSIS, I would like to pull that binary, convert to TIFF, then send it off to a webservice I will be working with via stream. Unfortunately, it seems that most utilities I have looked into expect the pdf to be on the file system and I would definitely like to avoid writing a temp file to disk to do this conversion. For me that ruled out GhostScript and pretty much anything that's based on it.Also, the PDFs I am working with are rather old (v1.3) so the assembly should be rather forgiving/flexible (PDFFocus errors out on all my PDFs but works fine with newer ones).Based on posts from StackOverflow, it seems like Atalasoft or PDF4NET might work but both are a little too pricey for me so I am looking for some additional suggestions. Given that this process will be embedded in a script task in SSIS 2008, this will have to be .NET.
View 6 Replies
Sep 8, 2010
can't seem to find any code nor an explanation on how the file types differ (Technically).
View 5 Replies
Mar 1, 2010
I must to convert a multipage tiff in jpg. When i have a jpg file i can put into a sql table and make a report from cristal report. I had write a code to write file (in blob field) so i need a exaple code to SPLIT multipage tiff.
View 6 Replies
Aug 16, 2007
I need to convert my gif to tiff for ocr recognition with MODI.
View 4 Replies
Jul 22, 2010
I need to convert many separate .tiff or .mdi files scanned invoices to .pdf but, I need to retrieve the invoice number from each file and rename each file with the invoice number. I am running VS 2005, and have looked at Itextsharp,hp document imaging, simple ocr, aquaforest, adobe sdk. The problem with all, is either compatibility or cost. I would like to avoid developing an application that enters FindWindow Lib "user32" press 'OK' to use demo ocr software.
View 6 Replies
Oct 10, 2009
Is there any way to convert word document to tiff programatically without installing word application.
View 2 Replies
Aug 10, 2009
I have built a simple image viewer in .NET and have the requirement to display multi-frame TIFF images in the browser. Presently, I have a (ashx) handler setup to stream back JPEGs that are co-mingled in the same database as the multi-frame TIFF's and it's worth mentioning that this handler will also return the first frame of the TIFF file in its current state. In the VB.NET code below (part of the handler) I am able to identify if a TIFF file has multiple frames and I started attempting to stitch the frames together but have not had any success yet. Has anyone returned multi-frame TIFF's using a similar approach? Note: I used the How to open a multi-frame TIFF image as a reference when developing the code below.
context.Response.Cache.SetCacheability(HttpCacheability.NoCache)
context.Response.Cache.SetNoStore()
context.Response.Cache.SetExpires(DateTime.MinValue)
[code].....
View 2 Replies
Dec 29, 2011
prints out the tiff tags associated with a tiff file?
View 5 Replies
Jun 9, 2009
is there a section on how to add controls, Ie like in fire fox Tools/Options
View 1 Replies
Aug 13, 2010
writing code to read, write, parse, navigate XML files. Are there any good, simple XML developer libraries/SDKs for handling XML files? If you're familiar with the Kellerman FTP Library, that is the paradigm I have in mind -- i.e., add an import, declare an object and you have every FTP function you'd ever want, with simple syntax.
View 1 Replies
Jun 5, 2011
Im looking for a class or code in VB.NET that can convert a black and white image in JPEG format to a grayscale TIFF format.
View 2 Replies
Feb 2, 2010
Program to convert binary pdf file to tiff file in VB.NET..?? We can use third party tools also..???
View 1 Replies
Oct 8, 2011
When debugging my app it works fine i.e. It gets the two commandline args, through a loop, and execute as expected. However, once I publish it, the app only picks up the first argument, which is the .exe file string. Code below:
Public Sub Main()
Dim args() As String = Environment.GetCommandLineArgs()
Dim n As integer = args.Length
[Code]....
View 7 Replies
Mar 28, 2010
I have to take over a project written in vb.net, which contains more than 400k lines of code written in option strict off mode. I want to build it under option strict on first before I do anything else -- which maybe converting it into C#. I found there's thousands of lines of code raises compilation error, mostly are about implicit type casts. Is there any tool would help to make it compile under option strict on mode if I don't want to correct every single line manually? Because it's really painful to add CStr/CInt invocation into every line of Code myself.
View 3 Replies
Sep 21, 2009
Okay so what I am trying to do is create a textbox that I can use as an equivilent to the run command.So In textbox I can type CMD/batch scripts and have it sent as normal.
View 1 Replies
Aug 3, 2010
This is the command line I want to use inside my VB.NET program. Look for the running process "mpc-hc.exe" and get the commandline of the running processwmic process where name='mpc-hc.exe' get CommandLineI want to retrieve the output from that command into a string. I know that it could be done natively in a VB.NET program and I have looked at how it was done. However, I cannot get the code to perform what it did in the commandline I have above.
View 1 Replies
Feb 18, 2011
For unit tests I would like to mimic different commandline arguments. How do I modify the commandLine args to my program at runtime (looked around but can't find the trick)? Basically I am trying to find a way to modify the contents of the READONLY property Environment.CommandLine.
View 2 Replies
Jun 16, 2011
I'm using VB.net to have a GUI on top of a commandline program.
[code]...
Which works and prints out all output from the commandline program. However at some point the commandline program ask for user interaction, eg: Type a number (1/2/3/4):But the commandline program stops after this. I suspect this is because it doesn't receive a valid option.Is there a way to capture when the commandline program wants user interaction and hold the reading of the stream to be able to enable the user to input something?
View 1 Replies
Nov 10, 2011
I want to exit my GUI application (vb.net 4) using a commandline parameter.I should send thive! from the commandline:
myapplication.exe quit and an already running instance of the application should exit.
Now, I have a mutex detection in place so that I can only have one instance of the application running at a time. It seems that if I send a commandline, it won't work on an already running application; it will only work on one that is launching.
View 3 Replies
Apr 30, 2009
I am trying to automate VC++ build via an addIn written using VB.NEt so that we can schedule it using a simple batch file. This addin performs some custom pre-requisites before the build is started. The build is invoked as devenv.com /useenv %NEWSOLFILE% /CLEAN %BUILDCONFIG% /OUT %OUTLOGFILE% > nul
with appropriate filename substitutions. I am facing problem in the following entry-point:-
[Code]...
View 1 Replies
Jan 27, 2010
I have an application that has file extensions associated with it. The application has been deployed using ClickOnce. I have checked the associations table to confirm the entry is there and the association is to the 'ClickOnce Application Deployment Support Library'. When the application is triggered using a file with my extension, it does not pass the filename / directory in the CommandLine Arguments, instead you get the executable path of the application.
Which is under ..LocalSettingsApp"Random Strings"MyApp.exe
I have checked the Registry entry to confirm what the extension is set to open with and the application is dfshim.dll. Is there a way to overcome this, or is this just another limitation of ClickOnce deployment?
View 3 Replies
Dec 26, 2005
I have commandline strings that contains application paths and might contain arguments. Some examples:
1. "C:Program FilesMicrosoft Officewinword.exe" "C:some dirdocumentname.doc"2. "C:Program FilesSome Dirapp.exe" /dosomething3. C:Program FilesSome Dirsomefile.exe4. C:somedirsomefile.exe /whatever5. C:Windows
otepad.exe6. someapp.exe
I'm looking for a simple way to split the path to the application and the optional argument.Sometimes the string contains quotes around the path (1&2) and sometimes, even when the path contains spaces, the string does not contain quotes(3). And sometimes the string does not contain spaces in the path (4&5&6), but a space is used before the argument(4). And (6) is a executable without a path. I have to use the environmentvariables the find the fullpath of the executable. This string (6) can also have arguments.Is there a standard function available to do this split?
Note:I have a regex pattern to handle (1,2,4,5,6), but is doesn't work for (3), because of the spaces in the path."[ ]+(?=(?:[^""]*""[^""]*"")*(?![^""]*""))"I cannot control the strings. Some of them come from user input and some of them come from the registry.
View 2 Replies
Jan 23, 2012
I am developing an application that will run with a GUI when no commandline args are passed, but can also run invisibly if started from the commandline and passed necessary arguments. I have been asked to include a /version argument that will return a version number. For simplicity this version number can be stored in a variable. Without doing something like writing the version number out to a file, what is the best way for me to return this info to the caller? My app will almost always be started from a script, so the script will have to read the version number and make decisons based on the version.
View 2 Replies
May 4, 2012
I once heard about a software that could dynamically run dotnet instructions (C#, if I remember well) on its command line, e.g when entering 1==1, the output would be true.I don't remember the name of this soft, and sometimes one just wants to know the result of a given instruction, without having to create a new program, compiling it and run it...
I would happily take the challenge to make a soft like this on my own later, but for now on I'd just like to find this soft.Does anyone know its name, or another app which would achieve the same result? (Don't tell me PowerShell, I'm searching for something more handy.
EDIT For those who use Visual Studio and who didn't know (I just learnt about it), you can also use the Immediate Window. It even allows you to get intellisense in some cases.
View 4 Replies
Sep 7, 2010
we currently use our own 3rd party customer management system that is cloud-based. They offer pretty good reports; however, we need special reports and the only way to do this is to download our database though web services that the vendor offers. I have some education and experience with programming, but it has been a while. Instead of having to actively engage the webservices directly, our vendor has offered a stepping stone. They have a command line exe that interacts with the webservices and, with the use of different parameters, gets us to the point of having all the data downloaded in xml, csv, or screen printed - the only problem is that it will only do this a table at a time and there are 43 tables I need to interact with. I need to build something that can either be a console application or something that can be run automatically in the middle of the night when there is no load on the server.
Here is what I need to happen:
The command is CMSDownload.exe. It needs to login (again, there are already parameters set up to do this so I can hard code that into the script) Once logged in, the script needs to check a parameter that has been saved that signifies the last date of successful completion. (Obviously, it needs somewhere in the code to place this parameter also). As I mentioned before, each table needs to be downloaded into its own xml file individually. For instance, the following is one example of a table being downloaded in this fashion:
Generate an XML file of all of the data in the accounts table between '01/15/2009 09:13:34 AM' and 01/16/2009.CMSDownload -d somedn -u someusername -p somepassword -f c: empaccounts.xml -m xml -o all -t accounts -s 'start date' -e 'end date'
-d is a login component (credentials)
-u is a login component (username)
[Code]....
View 1 Replies
