.net - String.Format Decimal With Sign Fixed Number Of Decimal Places, No Decimal Separator?

Jun 27, 2012

What is the cleanest, most readable way to String.Format a decimal with the following criteria

start with a sign symbol (+ or -)
a fixed number of fraction digits
no decimal separator
right aligned
pre-padded with "0"'s

View 3 Replies


ADVERTISEMENT

Format Decimal Number (Comma As Fraction Separator With Two Digits)

May 22, 2012

Is there a format string to format a decimal to 000000000,00. So first 9 digits, right padded with zeros if needed; a comma as fraction separator and two fraction digits.
0 => 00000000,00
12 => 00000012,00
987456,456 => 000987456,46
So something like myDecimal.ToString("D9") together with .ToString("F2").

View 3 Replies

When Adding A Value To Another Value The Results Eventually Change From 2-decimal Places To Multiple Decimal Places?

Mar 13, 2009

Problem: Using the sub routing below, when adding a value to another value the results eventually change from 2-decimal places to multiple decimal places.Basically, the amount stored should always only be 2 decimal places, because the values passed in are always 2 decimal places. Output from calling the sub routine multiple times.

Running total = 329430.75
New Withheld Amount = 710.79
Running total = 330141.54

[code]....

As a workaround, I have a new routine that uses a custom round function to properly store only 2 decimal places - as the VB round function does not perform the type of rounding desired.I understand that we are removing the value from the dictionary and adding it back..

View 2 Replies

Format A Number To Only Show Decimal Places?

Apr 7, 2010

how i can format a number to only show decimal places if needed?For instance...

string.format("{0:SomeFormat}", 26.9) = "26.9"

and...

string.format("{0:SomeFormat}", 26.0) = "26" 'Drop decimal for whole numbers

View 3 Replies

OdbcDataReader In Showing Decimal Fields Decimal Separator Disappear With DB2 Dsn?

Oct 19, 2010

OdbcDataReader in showing decimal fields Decimal separator disappear with DB2 dsn

View 3 Replies

Format Number To Hower Many Number On Left Of Decimal And 1 Decimal Without Rounding?

Jul 28, 2010

format number to hower many number on left of decimal and 1 decimal without rounding

View 2 Replies

Using String.Format To Remove Decimal Places?

Feb 2, 2009

I have a program reporting 6.0054434322 gb Free on my machine.

Dim gigabytesC As String = (GetHDDFreeSpace(letterC) / 1024 / 1024 / 1024) & " gb"

I use string.format to try to chop off unwanted floating point numbers

Dim s As String
s = String.Format("{0:n3}", gigabytesC)

But.. The above line does not work.

Desired Result: s = 6.005 gb

View 3 Replies

Format TotalCost (a String) To Round To Two Decimal Places?

Feb 3, 2009

Also how would I format totalCost (a string) to round to two decimal places?

lblTotalCost.Text = "The cost of your journey for " + sumNoTickets + " people, is: + totalCost

View 7 Replies

Rounding Up Decimal Numbers To The Nearest 2 Decimal Places?

Apr 17, 2010

How would I go about rounding up decimal numbers to the nearest 2 decimal places? For example $7.0000032 would be $7.01 In theory, VB would make it $7.00 but if it is > $7.00, I want it to reflect that to the nearest penny... so $3.0000001 would be $3.01

View 5 Replies

Decimal Variable With 40 Decimal Places?

Apr 23, 2010

Is there a way in VB .NET to have a decimal variable with 40 decimal places?

View 3 Replies

Format 2 Decimal Places?

Jul 30, 2011

I want to format a number ex: 279388242 output 2,793,882.42

View 1 Replies

Decimal Places In A Number?

Oct 30, 2011

How do I check how many decimal places does a number have in VB.net?

For example: Inside a cicle I have an if statement and on that statement I want to check if a number has 4 decimal places (8.9659)

View 1 Replies

Change Format Of My Textbox Into Two Decimal Places?

Oct 29, 2009

How can i change the format of my textbox into two decimal places "#,###.00"

i used mask textbox and used this format 0,000.00 but i cant input more than 4 digits whole number

View 6 Replies

VS 2010 Format Textbox To 2 Decimal Places?

Nov 14, 2011

I am trying to format a textbox so it reset itself to 2 decimal place on leave.

So someone types in 10.899 and when they leave the textbox it will format to 10.90.

I have tried this: Textbox1.Text = String.Format("{0:n2}")

and I get this error:{"Index (zero based) must be greater than or equal to zero and less than the size of the argument list."}

View 6 Replies

.net - Display Number With 2 Decimal Places

Aug 20, 2009

I have a field in datatable .If 1000 is the value in it, i want to display it as 1000.00.Then if user changes to 1000.50 it should display as it is.Is there anyway to do this?

View 4 Replies

2 Decimal Places Even If The Result Is An Even Number?

Apr 2, 2009

correct syntax to format decimals. I want 2 decimal places even if the result is an even number i.e. I want 40 to show as 40.00 and 40.6666667 to show as 40.67.

View 8 Replies

Limit The Number Of Decimal Places?

Jan 29, 2010

ive done a bmi calculator bbut the end result has 4 or 5 decimal places when i only need one. how do i limit the number of decimal places

View 3 Replies

User Set Number Of Decimal Places?

May 23, 2010

How do I enable a user to set the number of decimal places in my code?essentially I have multiple variables in my code ,different kinds of pressure for example and with each instance I declare the following;

txt_Alt_Press.Text = Strat_Press.ToString(Press_DP)

I then set Press_DP in a module, declared as a public variable,

Public Press_DP As String = ("F1")

So what I want to do is make the "F1" bit a variable in itself, so then the user can set the number of decimal places with a numeric up-down control.

View 6 Replies

Number Of Decimal Places In A Decial Variable?

Jan 16, 2009

I have got a decimal variable however i only want it to be to two decimal places. How can i set this?

View 4 Replies

Round A Double To A Certain Number Of Decimal Places

Jan 8, 2009

is it possible to round a double to a certain number of decimal places

View 1 Replies

Rounding Double Number To 6 Decimal Places

Oct 8, 2011

How to i roundup a double number to 6 decimal places in vb.net?

View 1 Replies

Detect Culture Of Number Period Or Comma For Decimal Point / Thousands Separator?

Jul 1, 2011

In VB.Net, is there a way of auto-detecting the culture of a string representation of a number? I'll explain the situation:Our asp.net web site receives xml data feeds for boat data. Most of the time, the number format for the prices use either a simple non-formatted integer e.g. "999000". That's easy for us to process.Occaisionally, there are commas for thousands separators and periods for the decimal point. Also, that's fine as our data import understands this. Example "999,000.00".We're starting to get some data from France where some of the prices have been entered with the periods and thousands separators the other way around as that's the way it's done in many European countries. E.g. "999.000,00". This is where our system would interpret that as nine hundred and ninety nine pounds instead of the nine hundred and ninety nine thousand pounds that was intended.

View 2 Replies

Display The Number With Two Decimal Places And Dollar Signs?

May 7, 2009

I need to write a program that uses constants to establish the base pay, the quota, and the commission rate. The Pay menu item calculates and displays the commission and the total pay for that person. However, if there is no commission, do not display the commission amount (do not display a zero-commission amount).Write a function procedure to calculate the commission. The function must compare sales to the quota. when the sales are equal to or greater than the quota, calculate the commission by multiplying sales by the commission rate. Format the dollar amounts to two decimal places; do not display a dollar sign.The summary menu item displays a message box that holds total sales,total commission,and total pay for all salesperson. Display the number with two decimal places and dollar signs. the Clear menu item clears the name, sales, and pay for the current employee and then resets the focus.The Color and Font menu items should change the color and font of the information displayed in the total pay text box.Use a message box to display the program name and your name as programmer for the about option on the Help menu.

[code]...

So the issue is when I push the pay/calculate button everything is calculating correctly the first time, but then when I push clear to input another workers name and weekly sales and push calculate, my label is blank and does not display any info about the second worker. Then when I push summary after inputting the second worker, it's only displaying the total calculations of the first worker. I can't seem to figure out this problem on my own (After countless hours staring at my code I might add!), so I am hoping somebody can pinpoint what I have done wrong? EVerything else is seeming to work just fine.[code]...

View 1 Replies

Format TextBox Only Numerical Data And 2 Decimal Places, Enable Backspace?

Apr 26, 2010

I have managed to format a text box to be formatted to two decimal places, and to only accept numbers.Only problem is i need to allow the backspace so that if someone types something wrong, they can backspace and type the correct number

Private Sub txtCAmount_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles txtCAmount.KeyPress
'Allow only numberical input plus decimal.
Dim allowedChars As String = "0123456789."

[code]....

View 7 Replies

Data Type Variable - Restricting Number Of Places After Decimal

Aug 5, 2009

Any way (outside of writing rounding routines) to restrict the number of places after the decimal in a Decimal data-type variable?

View 3 Replies

Filter Xml Using Xpath And Linq (price With Decimal Separator And Thousands Separator Spanish)?

Jun 7, 2012

I'm trying to filter the results of a xml file. One of the fields I've been requested to filter is the attribute price of each node. The problem is the xml is from a spanish source and the prices are with decimal separator being , instead of . and thousands separator is , instead of .I'm trying to get an xml file filtered where only nodes withprices lower than one supplied appear.

The xml structure is:

<RoomStays>
<RoomStay InfoSource="" Price="201,60" Discount="0" MealPlan="Sólo alojamiento" MealPlanId="1" Provider="Marsol" ProviderId="3" HotelName="HOTEL LA ESTACION" Rating="" Latitud="" Longitud="">

[code]....

I've tried to filter using XPath and Linq2Xml. I've come to the conclussion I have to replace , with . and . with , but I get 0 results.With values below 1000 where there is only , I've got it using:

doc.XPathSelectElements(./RoomStays/RoomStay[translate(@Price,',','.')<=256.78])

But when there are prices above 1000 with thousands separator . it doesn't work, so I tried:

doc.XPathSelectElements(./RoomStays/RoomStay[translate(translate(@Price,'.',''),',','.')<=256.78])

But it returns 0 results (I tried to use replace function instead of translate to remove the . characters but I get an exception).

View 1 Replies

Convert Decimal Number To Binary Number With Fixed Bits?

Oct 29, 2010

I want to convert numbers from 0 to 15 like that

[Code]...

Problem is that when we convert 2 to binary number it gives only 10 in binary, but i want to convert 2 to 4 bit binary number 0010.

View 1 Replies

Convert String To Integer With Variable Decimal Sign?

Nov 22, 2011

I am currently looking into the conversion of a string value to an integer. Obviously I will need to do some validation as to whether the passed value is in fact convertible to an integer.

At the heart of my question is this: the users' local is nl-BE (dutch (Belgium)), which means that we use a comma as decimal sign (and points as thousands separator); e.g. 123.456,78 would be a valid nl-BE number. Now, when using the numeric keypad, the
decimal key will yield a point, not a comma (weird huh!). So many user will enter 123456.12 and when converted to an Int, this should yield 123456.

The thing is that I want to cover all possible angles; both points and commas may be used as decimal sign by the users. So I wondering if anyone has written some code that deals with such a situation. I was thinking of an extension method that makes the
conversion based on whether a point or a comma is last used in the passed string (since no thousands separators should occur after the decimal sign).

View 5 Replies

Format Number With Terminating Decimal?

Oct 17, 2011

I have an internal process that requires data in a very specific format. Nothing I can do about that. So in my VB.NET program I am trying to output a number with a terminating decimal and nothing after it. I tried

swOut.WriteLine("{0,10:###0.}", var)

But the output is a whole number

886
913
941

[Code].....

View 1 Replies

Convert A Decimal ( Decimal Place Holder = Dot) To A Decimal (decimal Place Holder =comma)?

Dec 20, 2010

how do you convert a decimal ( decimal place holder = dot) to a decimal (decimal place holder =comma)?

View 6 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved