.net - Change The Value Of A Checkbox In A DataGridView?
Aug 21, 2009
I have appended a column of checkboxes to a DataGridView using the following:
Dim chk As New DataGridViewCheckBoxColumn
DataGridView1.Columns.Insert(0, chk)
How do I change the checked state of a particular checkbox?
I have tried using the following code:
Dim val2 As DataGridViewCheckBoxCell = DataGridView1.Item(243, i)
val2.Value = True
DataGridView1.Item(243, i) = val2
The last line resulted in runtime error "InvalidOperationException was Unhandled
Cell provided already belong to a grid". Index 243 exists.
View 2 Replies
ADVERTISEMENT
Nov 9, 2009
I have data displayed in a DataGridView. The first column is a DataGridViewCheckBoxColumn, all other columns are read-only. The checkbox is not bound to data dirctly but - depending on check state - fires stored procedures. Selection mode for the DGV is FullRowSelect.Clicking on the checkbox with the mouse (CurrentCellDirtyStateChanged / CellValueChanged) works fine. Using the space bar when the first column is active also works fine.But: What can I do to change the state of the checkbox by pressing the space bar, when the "focus" is not on the first column? Right now it is a real nuisance to be required to move to the first column befor being able to check the box.
View 1 Replies
Aug 13, 2009
I would like to make a applcation that after checkbox inside datagridview is checked. After calcuation stuff, if result less than standard, then it set the checkbox to not checked state. But I find that checkbox in datagridview does not change. It changed after I click other checkbox. What I want is lagging one cycle. I tried dgv.refresh() or update event , no effect.
View 2 Replies
Jul 3, 2011
How to change vb .net datagridview row color based on grid checkbox value. Having bound DataGridView. BindingSource as data source. called DGV. I m using this code under cell_formatting event
[Code]...
View 4 Replies
Jun 4, 2011
I have created an Unbound DataGridView. It has has 4 Columns Name, Last Name, Picture, CheckBox. I would like to do change the checkbox's enabled state true or false (editable or not) at the time I add the row
Not its checked state :) and would also like to change image that is placed in the Image column cell during the add row.
View 10 Replies
Nov 22, 2011
I have a DataGridViewCheckBoxColumn who's column name is "booReadyToReport want to hide all the checkboxes in this column if "bintAnalyteCodeID" doesn't equal the selected value in a combobox on my form. ut I run this bit of code the DataGridView DataError event fires currently, have nothing in the event except an comment. he code seems to work, but I'm new to VB.NET and I'm wondering if this is the correct way to handle thishould I use the CellPainting event?
highlight rows with RBF3
For Each dr As DataGridViewRow In Me.dgvCalculatedResults.Rows
f dr.Cells("bintAnalyteCodeID").Value = Me.cbxAnalyte.SelectedValue Then
[code].....
View 3 Replies
May 15, 2011
I have some DataGridView code written in vb.net. (Nothing is attached to a datasource.)The 4th column is a checkbox cell.How do I detect if that checkBox is checked or unchecked?This code strangely reports TRUE or FALSE at random times. It even turns ON the checkbox in rows other than the row I clicked in. (Huh?)
Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
Dim whichGrid As DataGridView = CType(sender, DataGridView)
[code].....
I've tried countless other methods... none seem to actually get the checkbox ON/OFF value in vb.net.
View 1 Replies
Jun 21, 2011
I'm trying to change a range of cells on the SS to be checkbox type.
View 3 Replies
Jun 23, 2009
how to change column into checkbox with datatype of Boolean?
View 3 Replies
Jun 4, 2011
Is there any possible way to change the language of a form with a button or checkbox. I have found and tried ChangeLanguage("de")But that no work.
View 4 Replies
Jan 9, 2012
For some reason, I can't change the checkbox from True to False when I click the checkbox in my DataGridViewCheckBoxColumn called "Select". I setup my DataGridView (dgvWBFOrphans) with 5 TextBox columns that are Read-Only and 1 CheckBox column that is not Read-Only. I use a stored procedure and data reader to load the DataTable which is used as the DataSource for dgvWBFOrphans. I want all the checkboxes to default to True and allow the users to uncheck certain rows in the "Select" column.
Dim dtOrphans As New DataTable
Using cnn As New SqlClient.SqlConnection(clsDBConn.clsDBConnections.prpConnString)
cnn.Open()
[code]....
View 5 Replies
Jun 14, 2009
Whats wrong with this code?
When a checkbox is checked, the richtextbox1 will move to a new location in form3.
If CheckBox1.Checked Then
Form3.RichTextBox1.Location = (28,08)
End If
View 2 Replies
May 17, 2009
I'm making a program where the order of which check box is checked matters. At the moment theres a loop (as shown below.) but in which order it adds things to my list box... is... iffy. Is there a way to change the order? I tried 'Tab order' but that didn't seem to work.
[Code]...
View 11 Replies
Dec 22, 2011
Public Class Form1
Private Sub CheckBox2_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox2.CheckedChanged
[Code]....
As you can see, when I enable/disable my checkbox it enables/disables my textbox.
The thing is, I have more than one textbox, how can i add more textboxes to be enabled/disabled?
I tried using If TextBox2.Enabled = True AND TextBox1.Enabled = True Then
TextBox2.Enabled = False And TextBox1.Enabled = False. (of course fails)
View 5 Replies
Aug 12, 2011
I need to change the cell type of an unbound datagridview ROW to checkbox type at runtime. Optionally adding a row of all checkboxes or changing the default type to checkbox is also fine. I see many examples for setting a column type to checkbox but I don't see anything that operates at the row level. Even operating at the cell level would be fine.
View 1 Replies
Jul 7, 2010
I have the code below which works fine when checkbox at Cell 2 is Checked ie., the date is inserted in Cell 9. Now, when I unclick Cell 2 I want the Cell 9 to be cleared. Presently, it is not cleared after unchecking. The code highlighted in Red is the area I reckon I have a problem...
Code:
Private Sub DgvReturns_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DgvReturns.CellClick
If e.ColumnIndex = 2 Then
[code]....
View 2 Replies
Jan 20, 2011
i want to know how to perform some action when i check the checkedbox in the datagridview ?
if like, when i check this>> i will bring some data to another DGV, on the other way of saying is just add a new row into another DGV.
same goes to when unchecked the checkedbox >> i want to remove the row based on the checkbox in that specific row that i unchecked .
i used the method [datagridview_CellContentClick] and [datagridview_CellEndEdit] before..
for add new row into datagridview-SUCCESS but when i want to remove the specific row, -FAIL to do. that.
View 2 Replies
Jul 1, 2010
I have a tbl called tblProjectpatients which also has 2 fields Yes and No (these have the data type - Bit). These two fields have been populated with false and true values. On my form, I have a datagridview which is populated with various values from tblProjectpatients. The problem am facing is that the checkbox's for Yes and No on the datagridview are empty at runtime eventhough at the backend they have either False or True values. I am expecting the checkbox showing on the datagridview to be either checked or Not Checked depending on the True or false values.
View 1 Replies
Aug 8, 2010
I have a datagridview (unbound). Fields are Name, Family Name and Phone No and a checkbox colum.There are ten rows in that DataGridView. There is an OK buttonI need to get message of showing which rows user has checked. The message should appear when user clicks OK button.I am not able to get this message. I tried following code in OK button
Dim strCB As String =
dgvChooseQs.Rows(0).Cells(3).Value.ToString
[code].....
View 1 Replies
Apr 6, 2010
this code which supposedly updates myTable when the check mark is preset on a datagridview.The latter has a checkbox (a bit in myTable) in column 5.The code works but only updates one row no matter how many check are in the column.
View 5 Replies
May 21, 2011
i have a treeview with checkboxes, images and text.i need to change the spacing between the checkbox, image and the node text.Must i use the DrawNode event and draw the checkbox, image and the text at new positions?
View 4 Replies
Jul 5, 2009
does anyone know how to change the text color of a disabled checkbox control?I have drawn a black background on my form interface and a checkbox has been positioned on top of this background. When the checkbox has its enabled property set to false, the text cannot be seen at all ( so I assume the disabled text color is black ).Does anyone know how to change this color? I've tried changing the chkbox.forecolor property from within the program code but it didn't change the disabled text color :/
View 3 Replies
Apr 26, 2011
I am working on a little project and am having some issues with a checkbox. I am adding a number of checkboxes to an ASP table via code by adding rows and columns dynamically. This all works fine except for when I go to check them based on loading a preexisting record. For some reason some of the checkboxes are getting set to TRUE when the new row is added to the table. [Code]
View 1 Replies
Feb 21, 2010
I have 2 events, one is that user can drag and drop the checkbox to wherever they like and other is to double click on the form to change background image. How to save these settings so the next time the form run, I'll have new checkbox position and background image.
View 6 Replies
Nov 1, 2011
I have a checkbox column in the datagridview and also a column named "partqty" which displays the quantity of materails available.. I would want that when the user checks on the checkbox, the quantities of checked rows should be added and displayed in the textbox..
I tired something like this.. But it displays 0(zero) in the textbox.Private Sub button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles button1.Click
[Code]...
View 2 Replies
Jun 21, 2010
I just want to know on how will I add a Checkbox in each row of my datagridview. First I used a datatable to get all the values from my database and then pass it all to the datagridview. What I want to happen is at the first column of my datagridview there is the checkbox.[code]
View 4 Replies
Dec 30, 2009
I've created a Datagridview bound to a Datatable. This Datatable is updated by a event to reflect statistical information as it changes (sub second resolution). I have a checkbox to determine if a row is available for other functions and can be toggled on and off normally if my eventhandler is not receiving my updates.
If my bound Datatable is changed, the checkbox returns to its previous state as soon as the cursor or focus leaves the checkbox glyph (not the cell).
How do I toggle the checkboxes without them reseting without disconnecting my eventhandler?
View 1 Replies
Aug 9, 2010
I have a datagridview (unbound). Fields are Name, Family Name and Phone No and a checkbox colum.
There are ten rows in that DataGridView.
There is an OK button
I need to get message of showing which rows user has checked. The message should appear when user clicks OK button. There could be several message, checking each row one by one, in a loop.
I am not able to get this message. I tried following code in OK button
Dim strCB As String = dgvChooseQs.Rows(0).Cells(3).Value.ToString
Cell(3) is my checkbox. Donot consider Rows(0), at the moment I am just checking value at row 0
View 2 Replies
May 7, 2009
I'm using vb.net (2008) with mySQL database.
View 3 Replies
Mar 11, 2010
I have a datagridview with 2 columns, one is text box and another one is check box column. My problem is that when i check or uncheck on cell of check box column i just want to show a value of this cell but it show opposit to it real value, it mean that when i check on this cell its value is false so this result is not correct .
View 3 Replies
