when i use TOAD to update a table all works just fine when using this query:
Update CSR.CSR_EAI_SOURCE ces
Set (STATUS_CODE, COMPLETE_DATE, DATA) =
(SELECT 'ERROR', '', REPLACE(REPLACE(c.Data, '...', ' '), ''','''')
[code]....
It stays on the ra = OracleCommand.ExecuteNonQuery() continuously until i get the error The CLR has been unable to transition from COM context 0x3327fa8 to COM context 0x3328118 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time. To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during long running operations.What could i do in order to get this working within VB.net since it works just fine in TOAD when running that same query?
I'm trying to update a record in MS Access database with the code below. But it says 'Syntax error in UPDATE statement and highlights cmd.ExecuteNonQuery()'.
I'm using parameters on a SQL stored procedure to insert a record with data entered on a website form (and on the form I'm using VB.net). As of right now, the form works perfectly; the record is inserted. However, after the user hits the submit button, everything executes and then the page will basically refresh with emtpy values in all the fields. So I want to give the user some type of SUCCESS message, assuring the user the information was successfully entered into the database. So my question is: How can I verify that the record insertion was successful? I want to do this with the ExecuteNonQuery statement, because that's what I'm using.
Code is below: If Page.IsValid then Dim MyConn as SQLConnection= New SQLConnection("Blah") Dim MySQL As SQLCommand MySQL= New SqlCommand("proc_newWebEntry", MyConn) MySQL.CommandType = CommandType.StoredProcedure [Code] .....
I'm new at vb.net programming so be gentle. I have the flowing code
Dim dAdapter = New OleDbDataAdapter("Select * from items", dbConOra) Dim dTable = New DataTable() dAdapter.Fill(dTable) BSourceItems.DataSource = dTable DataGridVew1.DataSource = BSourceItems
Essentially this section assigns a randomly generated password to a user if they have forgotten theirs. The password is generated in some other code.
I have set up the SQL to search for the log-in details (in the case and email address which is unique), it then brings in the field and then updates it to the new password.
But for some reason I cannot get it to update the MS Access Table.
I Keep getting a SYNTAX Error message.
Private Sub bthresendpassword_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bthresendpassword.Click If txtemailaddress.Text = "" Then
I am having problems editting my record where i basically want to select a record from the datagrid view and change any details where the data is displayed in the text boxes i have put on my form and click edit and have the data updated on to the database as well as the dataset. As for my updating button the code seems ok but i check my database and it doesnt change. Here is my code where the edit and update button code are at the bottom:
Imports System.Data.OleDb Public Class Stock_Control
i try to create a windows form that act something smilar to a cash machine i managed to enter a mount with my first button then my second button is for withdrawing money it checks the amount in the text amount if it is higher than the amount the small dat hold in the amount it will throw an error message if it is less or equal it write the amount in the text box my goal is to deduct that amount in the textbox amount from the amount already at the database.[code]
I am basically trying to retreive a record from the database where CardNo is the text in txtCardNo.However it doesnt work it keeps seying datatable cannot be converted to dataset.row..[code]
I am using Visual Basic 2008 Express edition along with mysql manager 2008.I have made a bank database and am looking to add a feature to update the balances of customers (individually) when i withdrawl or add money.The code i am using currently is
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click Me.Validate() Me.StudentBindingSource.EndEdit()
[code]....
This is the same function as the Save record but, i want to be able to enter a value into a text box and then click the button to update the balance.
I am trying to update a table based on row selected in a grid (C1TrueDBGrid1.Columns(1).Value), but I am getting the following error:
Update unable to find TableMapping['Table'] or Data Table 'Table'
Code:
Dim ConnectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=/DataDirectory/AOPT2002org.mdb;Persist Security Info=True;Jet OLEDB:Database Password=testaopupdate" Dim objConnection As New
When I move to the second tab the correct data appears in the text fields.
When I modify a field on the second tab the modified data appears in the DataGridView, on the first tab page. But when I check for changes in the DataTable in the following manner
Dim ModifiedRows As DataTable = TableData.GetChanges() I do not see the modified row - i.e. ModifiedRows = Nothing? Why is the modification not being identified???
OK - I have worded this search 40 different ways and I seem to be lost here. Every example I find seems so happy that you can easily drag and drop a datagrid and let the user fill it in -- then they stop! I know how to do everything I am asking through LINQ. That obviously won't translate here. I really should have learned ADO.NET first, then LINQ, but NOoooo... I need to know how to do the following in .NETCF (Windows Mobile 5) using a SQL CE database on the device.
Add a new record and populate some or all of the fields with data I supply. I don't need to add a record to a datagrid - sometimes the user will not even see the record. How do I add a new record -- put data into it and save it? For example: Create a new delivery record, say, and have the program store the date in one field and a number in another field. Search for a record, then update data in it. Again, using LINQ I can do this easily -- I cannot for the life of me find any examples of doing it without it. I can find lots of examples of populating a grid of databound fields, letting the user make changes then saving it out. I don't need to do that. Say I need to search for the one record that meets a criteria (customerID=10 and orderID=1234), then when (if) that record is found, update a field in it.
I can't seem to save data in the database when updating a record. The record appears to be updated and even displays the new record on my form but as soon as I close and restart the program the old record is back and no changes are made to the database. Is there something im missing here ?
If CN2.State = ConnectionState.Open Then Dim Comand As New SqlCeCommand("SELECT * From Incentives Where IncentiveCode = '" & TxtCode.Text & "'", CN2) Dim rs As SqlCeResultSet rs = Comand.ExecuteResultSet(ResultSetOptions.Sensitive + ResultSetOptions.Updatable) If rs.Read Then
This is the form I'm having problems with. As you can see I've created a tab interface which is working. There are five text boxes on it which are binded to the Staff table in the database. When the tab is changed, the binding is changed to a new field. However, unfortunately, when a new record is selected, the data bindings do not update, and instead, the first record is always being used. We suspect the problem may be coming from the fact that there is code to unbind from the text box and rebind it again. This is the code I'm talking about...
Private Sub TabCheck() If TabState = 1 Then pnlTabs.BackgroundImage = My.Resources.tabs1 txtBox1.Visible = True txtBox2.Visible = True [Code] .....
I have a code made in Visual.net 2005, and I have a problem. I have an excel file where I store records. I can read this records without problem, but when I want to make a modification I get the ERROR :
"Current Recordset does not support updating. This may be a limitation of the provider, or of the selected locktype"I hope you can help me, I know that by default the file is open as readonly, but I dont know where do I have to specify the opposite.
On my form I have a datagridview which is bound to a 'Supplier' table in Access 2003. Once I click on a record on the DataGridView, textboxes below which are also bound to the same source are automatically populated with the relevant data. What I want is when I click update, that the records in the database are updated as well as the dataset but what happens is that the dataset is updated, I invoke the tableadapater.update method but no permanent changes are made to the database.
Below is the code attached to the 'Edit Supplier' command button.
Private Sub cmdEditSupplier_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdEditSupplier.Click Me.SupplierTableAdapter.Update(QuoteDataSet.Supplier)
Scenario: VB2010 express + Sql Server 2008 express. I have a master/detail form where I can modify a record. With VB 2010, I use the new Table Adapter Manager which handles all Updates/Deletes against the database inside a Transaction. Question is that before I update the modified record (only the master one), I need to insert it in another table (history table). My question is how I make both insert and update inside the same Transaction. By code? Using Stored Procedure?
I am trying to update an Oracle Database record and i keep getting this error:
ORA-01704: string literal too long 5
I looked up that error and it seems that i have a limit of 4000 charters since i am using Oracle 10g. However, the prgblem is that its the same exact data i am putting back into that record so that is why i am unsure as to why its giving me that error for the same amount of data i took out of it.
Here is my update code:
Dim myCommand As New OracleCommand() Dim ra As Integer Try
This VB.NET rookie is asking for the support of those with expertise. BACKGROUND: Form1 has a Datagrid, Dataset1 create by drag DB into datagrid. Form2 presents the record selected from the datagrid. Within the LOAD_FORM I search the DB with the Key and place data in Dataset2 (DS created manually)
CHALELNGE Record updated in Form2 is saved in DB fine and when Form2 is closed, record updated does not appear in Form1. I�ve tried the following but no sucess In form1 event Ive got the code to load data into the DS Me.TUSERSTableAdapter.Fill(Me.PTDataSet.TUSERS) FINALLY: What should I do to see the datagrid updated?
I have created simple database project, using vb.net, ado.net, oledb, datatable, datagridview.My program is working nice, Here i m facing Problem with Update Record, when I update Record it only update table in Memory not in Real Database. or some times it shows error message.this is my code for Update button i m facing problem with Private Sub btnUpdate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnUpdate.Click
there is a tab control system. It relies on only five text boxes, and their bindings change when the tab is changed The relevant information is displayed. However, if I navigate to a different record...You can see that the same information is displayed in the tab control text boxes, and not the employee's details I just selected in the data grid or the navigation. How can I fix this? I'm not sure what's gone wrong here. Here's the code that changes the text boxes upon changing tab...
Private Sub TabCheck() If TabState = 1 Then pnlTabs.BackgroundImage = My.Resources.tabs1
I have designed a form which contains a listview(to see the list records) and textboxes (used for adding or updating).an already save record into table using this
i need some function like adodb.recordset on vb6.0 on vb.net but seem i cant manipulate it like recordset because i want to manipulate in retrieving,inserting and updating my record on just only how call on the database im using mysql database..