I had the great fortune to receive the task of converting an ancient VBA Access order tracking application into a stand alone VB application. Along the way I was trying to parameterize their SQL queries, most everything has gone well but now I am getting an error I can't figure out."Item cannot be found in the collection corresponding to the requested name or ordinal."Iam kind of stuck using as much as the old code as possible because the client "knows VB" and wants to be able to edit the code after I'm gone.
And I like the speed of the datareader over a datatable, so I'd like to make this work! Using VB.NET 2005. All the prior responses to the same problem say to return to datareader or use a datatable. I have no idea what return to datareader means.
I have an asp.net page that contains a javascript function. I am using a vb.net code behind to run a stored procedure against the database to pull back address information. Results can be 1 or more rows. I need to pass the results to the javascript for processing. My code is as follows:
VB.NET
Partial Class _Default Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
I have a stored procedure, and I want to save the results of the stored procedure into a table. Is there a way I can do this with a simple query without creating the table beforehand.
I have a very specifically designed table in a .aspx page. I have an <asp:SqlDataSource> tag that works fine with a DetailsView. I have tried DetailsView, ListView, Gridview etc. and cannot obtain the desired design. Is it possible to execute a Stored Procedure and have the individual results displayed in the individual cells of a web page table? This seems like it should be simple but it apparently is not.
My application produces this error System.Data.SqlClient.SqlException: Login failed for user..This started after I added a stored proc in my dbml file. It works fine in my local enviroment, but throws that error when deploy to staging sever. the user it displays is foreign to me?
this is the first time i am calling a stored procedure via vb.net and i would like to make sure i have everything correct before i execute it. This is my code:
[Code]...
The stored procedure returns 6 colums worth of data and i would like to add that data to a listview. I'm not sure i have the correct sytax for doing that but this is what i used in my previous sql code (running a query with, not a stored procedure). Also, i'm not sure how to go about getting data for the @xxx names above from a textbox? How do i pass the values into the @xxx names from the users textbox? The MS SQL mangement studio code is this for the the stored procedure:
My experience with Stored Procedures is limited and I'm hoping this will solve my payroll problems. Further, for what I'm attempting to accomplish a Stored Procedure may not be the best answer.I'm attempting a Payroll function in which the goal of the Stored Procedure is to fetch the data for a given Payroll Period, do math on the first returned employee, output a calculated result, then move to the next. Let me explain a bit more...Based on a Pay Period ID which is given to the Stored Procedure, I would like it to do the following:Select the employee in that period, add a total of his hours worked, then add that employees total commissions, whichever amount is greater - return that value (along with the totals - such as the total hours and total commission) - then move to the next employee until completed.
I have created a search form based on my SQL database to search for individual records based on 3 types of criteria. The form is up and running but I want to be able to add some more code. I have assigned Stored Procedure to each click event for each button. What I wantr to be able to do is after value is added to text box and button is clicked if there are no reults to display than a message box is displayed with adequate message detailing this. Also is it possible to add a count of records to the form. Once value has been enetered ij tyext box and stored procedure runs and fills dataset with required data can I display a box to show number of records from this search.
I'm working on a web application called AssetCenter. I have 2 projects, one of them is the application (ACWEBNET) and the other is the web service (IMACWEBSVCS) that contains service related information.
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID From DropDownValue Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
We have had a visual basic.net (2002) service running on our server for several years now with no problems. However I recently needed to update one of the DB calls by adding additional fields to the SELECT statement. However, after adding the new fields, some of the returned data is coming back empty when I loop through the records. I have confirmed that the querystring is accurate and returns all of the data through a third party viewer, so I'm not sure what is going on.For example, in the code below, everything worked fine with field1, field2, and field3. However, when I add field4, data for field2 and field4 come back empty when looping through the results.
I'm trying to set up a database connection between an ASP page running VBScript, and I have found code to do this. However, the 'provider' attribute to the connection does not work. The code is below:
set conn=Server.CreateObject("ADODB.Connection") <strong>conn.Provider</strong>="Microsoft.Jet.OLEDB.4.0" conn.Open(Server.MapPath("mIndexDb.xls")) set rs = Server.CreateObject("ADODB.recordset") rs.Open "Select * From mIndexDbTable", conn
I want use a stored procedure in my project but I have no idea about it. Please could you tell me a little bit about how to use I can use one in my vb.net application ?
I have noticed the following but unable to understand why.Whenever a procedure is called in .net it takes more time than when it is called subsequently.Even if a procedure is called after some interval it takes more time than it takes if it is called quite frequently. i am not asking about sql query or sql command. any user definded function or user defined method takes much more time to finish when it is called occasionaly. but when the same procedure is called quite often it finishes a lot faster. why?
I am currently building an ASPX webpage for internal use. Basically, there are two buttons on this page and I need each one to kick off a different stored procedure on our local SQLServer based on the needed task. these stored rocedures do quite a bit of work and take 3-5 minutes to finish running. In neither case do I need any kind of gridview or other output from these stored procedures, as they are simply crunching/cleaning data that will populate some tables that the user will then use to complete their task. There are also no inputs or parameters needed.
So i'm OK at ASPX and pretty good at SQL, but have no idea on the VB code behind page. This is what I have ben able to put together based on 3 days of googling. i think i am close but can't quite get across the line.
CODE:
I'm not sure if you need to see any of my ASPX or my SQL. both work fine on their own, but i am not able to get these buttons to work.
I have something strange occuring. The following code works 100% when run in VB2008 Express.When compiled and run onthe same system, it generates the above message.The codebasically opens a Access DB and loops thru the db There is a progress bar (also tried a simplelabel) to display progress using AbsolutePosition.
dbInUse.Open("Provider=Microsoft.ACE.OLEDB.12.0; Data Source=C:SCDBv4DataSCDBData.mdb") rsInUse.Open(OpenCommandSQL, dbInUse, ADODB.CursorTypeEnum.adOpenKeyset, ADODB.LockTypeEnum.adLockOptimistic)
I have a stored procedure that when I run it within my application it times out, but when I use Management Studio and pass in the same exact parameters, the stored procedure executes under a second. I had this exact same issue with the same stored procedure before, and all I did was recompile it, and it fixed the problem, but I do not want to keep having to recompile this stored procedure every few days or so. Has anyone else ran into this issue before?
Another note I would like to mention, is that I'm currently working on a test database, so I'm not inserting, deleting or updating any of the records that the Stored Procedure is using. So the database itself is not changing, but for some reason the Stored Procedure is showing degradation, and at the most we have 2 users in the database at a time.
Below is the code I use to call the Stored Procedure from my app.
As I mentioned, if I run the Stored Procedure within Mangement Studio, it runs with no problems. Also if I recompile the stored procedure, it runs fine within the app, but after a few days, the stored procedure starts to timeout again within the app and I need to recompile it again.
I am pretty new to VB and I am not sure why this is not working, basically I am trying to run a stored procedure from my web code. The sp runs just fine in SQL, I've tried it several times so I am sure that is not the problem. I don't want to return any results, I just want to see an "ok" statement if it runs and an error message if it doesn't. The code I am using for the lables (warnings and confirmation) is reused from earlier on the same page, the same goes for the validations (valUpload).
I am using SSMS 2008 and VB. I'm a novice VB developer. I am trying to display results of a simple stored proc on my ASPX page. But I get the error below. Here is my code behind for the ASPX page:
I am trying to get some data relevant to a stored procedure (or funtion) back from a database using .Net. The first thing I need to be able to do, is get the stored proc from the database and turn it into string format.The information I need is: The return set of columns, tables used within the SP, Stored Procedures called from the SP. The only way of doing this at the moment that i can think of, is though parsing the text and looking for keyword matches.
I am a newbie to vb.net and sql server. My responsibility is to build a vb.net function that when a scanner scans an object, it would take the scanned string and call a stored procedure to get a row of data that match that scanned string and pass the data row to an application that would print out a label.below is my vb.net and sql server stored procedure script
1. Do I have to come up with a public class in order to store my row of data to pass it on to a different vb.net application that would take that data row and print out a label?
2. In my stored procedure, how would I return the founded data row to the vb.net function?
Module makeLabel Public Class AMGCdata Public fileName As String[code]...........