I've to show some PowerPacks.RectangleShape in a PowerPacks.ShapeContainer. A loop in my code add shapes to the container
(objshapecontainer.shapes.add(objshape), but at the end of the loop, only the last shape is displayed, in fact objshapecontainer.shapes.count doesn't exceed 1
I want to use a loop to draw different types of shapes on a visual. I want to use the Random function sothat the number of each shape would be set randomly. For example, I want three triangles followed by two circles, followed by two triangles, etc. When you click the button again a different set of shapes would be rendered. I can draw shapes. What I need is how to use the loops and Random() to do this. I tried to use concatenation but it does not work with the Polygons.
View 15 RepliesI haven't actually mastered VB.NET programming yet but I am already tired of the standard shaped and grey colored controls. Is there no other way (Programs or by code) of designing better looking controls of other shapes like circles or any shape I want and to give cool color and effects just the ones used in Windows Media Player v.11?
View 2 RepliesI have aspx form with several textboxes.They are populated with values from a table via retrieval of a dataview.If the row count for the dataview is 0, then I'd like to reset the values in all textboxes. How can I loop through all the textboxes and set a default value?I've tried the following, but no sucess.
For Each ctrl As Control In Page.Form.Controls
If TypeOf ctrl Is WebControls.TextBox Then
CType(ctrl, WebControls.TextBox).Text = ""
End If
Next
My first For Loop was using Page.Controls but it returned only 1 count.The textboxes are inside a tabpanel (ajax), so do I have to locate the tabpage and then find all it's controls (for each tabpage)?
I am rather irritated at this. I have no clue why looping through controls on a form and in groupboxes leaves out 75% of the controls.
Here's the code I have:
Dim settings As String = ""
Dim gbControl As Control
Dim gbbox As Control
[Code]....
I want to have setting save all settings to an ini file, and not have to reprogram the saving routine when I add a group box or control. At random times, any number of controls can be disabled, checkboxes can be checked and unchecked, radiobuttons can be checked and unchecked. Regardless of the state of the control, I want the control to show up in the loop. But they don't. Only controls that are enabled and only checkboxes that are checked, every other control state is ignored. That's crap, and is definitely not what is needed by any programmer of any type. We're capable of determining if a control is enabled, hidden, checked, visible, and otherwise.
How do I get the controls to be included in the loop regardless of their state?
I have the following code to dynamically add handler to my controls
Private Sub HandleMyControls(ByVal Proc As EventHandler)
For Each c As Control In Controls
Select Case IsContainerControl(c)
[Code].....
There are some subs and functions that help me in what to change and where to loop. My problem is that right now, I can set only .enter event of the control I tried to set parameter as Event but i got an error on that. So, what I want to do is something like this:
Private Sub HandleMyControls(Event as ???????, ByVal Proc As EventHandler)
If MatchControl(c) Then
AddHandler c.Event, Proc
End If
I'm new to ASP.NET and i would like to ask, How do i loop on each Labal control in the page.
View 10 RepliesHow do i loop on each Labal control in the page i tried :
For each lb in Label.Conrols
next
but for no avail
Im trying to loop through a collection of controls see code:
Private Sub addZeros()
For Each ctrl As Control In Me.Controls
If TypeOf ctrl Is GroupBox Then
[Code]....
I can use the below code snippet to clear the text from each textbox on a form.
For Each ctl As Control In Me.Controls
If TypeOf ctl Is TextBox Then
ctl.Text = ""
End If
Next
But if I want to use it to ensure that all radiobuttons in a group of radio buttons are unchecked then it doesn't work i.e.
For Each ctl As Control In Me.Controls
If TypeOf ctl Is RadioButton Then
ctl.checked = false
End If
Next
I'm assuming it is because the checked property is not common to all controls.
I can't use the normal method, my controls (picture boxes) names contain numbers such as 00, 01, 02 etc which corrispond to my multidimenional array.
I'm attempting change the picturebox's values in a for loop via the counter in the loop, for example:
For i = 1 To 4
PictureBox(i).enabled = False 'Picturebox1 will be the first one(counter starts at 1)
Next
I basically need to access each one as I would with an array, I can't type the full names out, can only refer to them via their names + counter number because I don't know what control name I would be dealing with at that time in the loop.
What I am trying to do is dynamically create a bunch of dropdown lists and then I want to loop through them and update the database with those values, but the problem I am facing is that I create the dropdown lists, but then when I go back to loop through them they are no longer in the panel. I don't know why but when I am debugging I have a count of 50 controls in pnlTeacherSelect right up until I press the button that calls prcChoose.
[Code]...
I'm creating 50 picbox in code. they are named Area1_1 to Area 1_50.
They all have different XY position and different size, setup in % of the form width.
Like this:
Code:
Dim Area1_1 As New PictureBox
' Dim 48 other box...
Dim Area1_50 As New PictureBox
[Code]....
But it don't work. Probably because the controls is not added to the form yet...
I want to create a table with 2 fields (FormName, ControlName) that consists of all form names and all control names (within that form).[code]...
How do I loop through all forms and controls in my project?
I'm trying to load a file where this file has, like, 10 lines. And I want to load each line (0 to 9) to each TextBox in my app (TextBox1 until TextBox10). So, there's a way to do this with a counter?
Like this mine code (that doesn't works):
If (System.IO.File.Exists("configs.ini")) Then
Dim configs As String() = System.IO.File.ReadAllText("configs.ini").Split(vbNewLine)
Const Max As Integer = 9
Dim TextBoxes(Max) As TextBox
For i = 0 To Max
TextBoxes(i + 1).Text = configs(i)
Next
End If
Basically what I have are two loops, one inside the other, that will run until the given condition is met. Exactly what I want. My problem is that I want to be able to use the controls, like buttons, while a loop is going on.
I originally did not think of this until I had built this part of my program, what I want to know is if there is a way to use controls while a loop is going on or if their is an alternative.
1)I know timers can be used to meet these goals, but they did not work out as I had hoped and using two timers (1 to represent each loop) I do not believe is efficient.
2)I have considered using recursion, but have found this may not be very efficient either and am not quite sure if this will do what I want.
These loops run as long as the number the user inputted. So it could theoretically run for 100,000+ times. I am not looking for speed, but it would be good if there were a faster method that allowed me to use controls while it loops.
I want to reset programatically the values of all the labes on my form for example label1.text=1, label2.text=2 etc etc (there are 90 in total)
I came up with:
Dim i As Integer = 0
For Each objcontrol As Control In Me.Controls
If objcontrol.Name = "Label" & i Then
[Code]....
I have the following code:
Dim i As Integer
For i = 1 To 20
Dim captionTextBox As TextBox = DirectCast(Me.FindControl("news_Image" +
[Code].....
Where the comment is in the code above, I need to insert the value of the textbox (text) into Linq columns. For example: articleToUpdate.news_Image1Caption, news_Image2Caption, but I need to change the number after news_ to the value of i in the for loop.
How do you add an arbitrary number of controls to a form at run time? With indexed controls I could define the 'seed' control at design time and reference 'clones' of the 'seed' control at run time via the index. Now I must declare each additional instance of the control at run time then set each individual property that differs from the default for that control for each instance. Then I must add the newly declared control to the appropriate container controls collection. I'd like to do this in a loop but how can I get away from using a fixed control name in the declaration:
Dim controlname As New Control
I can't use a string that I can manipulate the contents of for controlname because it sees it as a double declaration. I can't use an array such as Control(index) for controlname. Dim Control(maxindex) As New Control doesn't work. Dim Control(maxindex) As Control works but any assignment based on this such as Control(indexvalue).Name = "ControlName" fails. It didn't address the issue of handling the declaration of new controls in a loop with some kind of variable name for the control.
I have a BackgroundWorker and the DoWork event, calls a function called "JustMe", it executes a loop to make visible all the controls on a panel, but does not work vb.net
Private Function JustMe As Boolean For Each ctr As Control In Panel1.Controls ctr.Visible = True Next Return True End Function Private Sub BackgroundWorker1_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
JustMe()
End Sub
I have a bunch of controls loaded into the same row/column in a TableLayoutPanel. I only have one at controls visible property set to TRUE at a given time. I want to be able to loop through the controls that specific row/column position in the TableLayoutPanel and test for a condition (control type) and then set this control's property to TRUE and all others to FALSE. Bascially I am turning controls on/off.
I know can loop through an entire TableLayoutPanel like this:
For each control in TableLAyoutPanel.Controls
Next
How do I restrict this loop to a specific row/column in the TableLayoutPAnel? Can you qualify where specifically you want to look in the container control?
I am trying to make a collection of controls that I can loop through. So I have this code in my form... Dim WizardFrameCollection As New Control.ControlCollection(Nothing)
I then try to add controls to the collection by I get a error "Object reference not set to an instance of an object." WizardFrameCollection.Add(Me.GroupBox1) I am not sure why I am getting this error. Groupbox1 is a groupbox that is on the form.
I have a form with a tab control, containing a small number of tab pages. I'm writing a sub procedure to clear the controls within a groupbox for the selected tab. A selected tab will only ever contain ONE groupbox and within a groupbox will be command buttons, labels, text boxes and possibly a combobox. The first block of code below firstly finds the groupbox within the selected tab. The next part loops around all control type and if of type texbox clears the text.
Now hears the head scratcher/confusion it error's with :-
Unable to cast object of type 'System.Windows.Forms.Button' to type 'System.Windows.Forms.GroupBox
Which I don't understand as I cant see where Im converting objects simply looping through all controls and then ONLY if type of control is textbox then clear text.
'Loop around all controls in form, simplified that all controls
'are within a SINGLE groupbox and clear contents or reset to default value
Dim groupbox = (From grpbx In tabAdmin.SelectedTab.Controls _
Select grpbx = DirectCast(grpbx, GroupBox) _
Where TypeOf grpbx Is GroupBox)
[Code] .....
I have a form with many buttons on it and I would like to loop through all the controls in a group control and find out which button is clicked.
I plan to use the click event of the button and I know it's easy to create a click event procedure for all of the buttons but would like to avoid that.
The group control is called GroupFilterButtons.
Any hunk of code that loops trough the windows form controls array, and based on top/left to bottom/right, resets the TabIndex property? I've mashed a huge form together and expect my user community to want to move things around, and I don't want to have to fool around with this over and over again.
View 6 RepliesI wanna make shapes like vb6 but i don't have shapes like that. i need to make them an array.is there any component or something to use like shapes?
View 3 RepliesCan I draw my own shapes (such as a filled circle, square, etc.) on a form?Can it be done from code as well as from the designer?Can I use events such as onClick() on the shapes?
View 3 RepliesI have a macro that creates shapes in my documents. The following macro will delete all of them. How do I modify it so if they say NO it will go through the document and find each occurance of the shape and ask if you want to delete this one? [code]
View 2 RepliesI am drawin three concentric circles, each with corresponding radial lines from the center to the side of each segment. I want to place text inside each segment and can do so with a horizontal text. I want to ROTATE the text to match the segment's angle and fit perfectly inside the segment, but when I use the Tramsform/Rotate options in VB 2010 the text is rotated but ends up in a unforeseeable place.
View 6 Replieshow do I create a geometric shape as a class? Visual basic has a Rectangle class pre-defined object that I would like to use, but I need to use a rectangle class that can use decimals for the 4 points to set its location. I do not want to draw a shape on the form for graphical reasons but I want to use the shape for an algorithm, how can I create a class for a rectangle using decimals?
View 1 Replies