I have this line:
VB Dim FileCount As Integer
FileCount = GetFileCount("X:/Movies", "*.mkv") + GetFileCount("X:/Movies", "*.avi")
Private Function GetFileCount(ByVal baseFolder As String, ByVal filter As String) As Long
Dim count As Long = Directory.GetFiles(baseFolder, filter).Length
For Each folder As String In Directory.GetDirectories(baseFolder)
[Code]...
This is starting to drive me nuts. I'm executing a DTS package from a worker thread that is calling an EventListener class to update the background worker ProgressChanged sub. As instructed, the ProgressChanged method is trying to update a progress bar to avoid thread issues but it is not working. I know the EventListener is throwing events because if I put a message box in ProgressChanged I get the package progress %. Why can't it update the progress bar?
[Code]...
I'm trying to add text to the progress bar. Or basically percentage. This is so far i found, but no luck. I also can't find a problem because everything looks correct to me. [Code] Any suggestions?
View 8 RepliesI am trying to add Images using open file dialog and folder browse dialog and populating the image list to listbox.While adding these Images I need to show the progress bar for every image it loads.
I am trying to get that but when the value of the progress bar say something around 25 0r 40 it is stopping at that point but I need to show the progress bar until it completes the 100% and then populates the Image list.
Here is my code:
Private Sub AddImages_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AddImages.Click
If Not Directory.Exists(Application.StartupPath + "Backup") = True Then
[Code]....
I have a form that I will be using to copy directories of photos from memory cards to locations on a computer. I would like to add a progress bar to the application to show the progress of the copying in real time. This is the code that I use to copy the directory in the first place
Dim SourceDir As String = SourceTextBox.Text
Dim DestinationDir As String = DestinationTextbox.Text
If System.IO.Directory.Exists(DestinationDir) Then
My.Computer.FileSystem.CopyDirectory(SourceDir, DestinationDir,)
Else
My.Computer.FileSystem.CreateDirectory(Destination Dir)
My.Computer.FileSystem.CopyDirectory(SourceDir, DestinationDir)
all you clever people out there I'm rather new to this and I'm using vb.net in visual studio 2005 and I want to add 20 WORKING days to the TODAY() value. I'm able to add the days, but it also adds NON-WORKING days.
[Code]...
In my project, i need to add days to a given date. but when adding the days it should not have saturdays and sundays.
View 3 RepliesI am attempting to dynamically create a profile page. Everything works fine except when I try to add the title (surrounded by <h2> tags) to the lbl control which is inserted in the select statement. Let me know if this is too confusing and I will attempt to explain further.
[Code]...
I am looping through all folders on the computer in a background worker. Starting with just the C: drive, the function works perfectly I've been tasked with adding recursiveness to this function to loop through all subfolders within each and every folder.
This is the working code without recursive. Startpath is set = "c:".
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim fs As New FileSystemObject
Dim fsfolder As Folder
Dim subfolder As Folder
[Code]...
EDIT: I was doing some testing and threw in an if check to skip the C:$ folders. Working ok so far and noticed something really strange. It doesn't loop through all the folders in the C: drive. I think it will loop through only the first 2 folders. One is C:Boot so I skip that and the other is C:Dev-cpp. It won't loop through the Program Files, Program Files (x86), or Users.
I'm using loop to read data from sql and then make some calculations then save it again to another table but when application loop for 3 or 4 times it's freeze but the job is done but if loop = 10 or more then it is freeze and hangup for long time .i need to learn how to make my application working better and never freeze and make application working with any count for loop without freeze .
View 7 RepliesI have a simple poker game that deals out 9 cards into pictureboxes and shows another 3 pictureboxes that hold cards for the dealer. The code itself does what I want it to...even though I'm at a dead end with writing the code further to evaluate the poker hands. I would simply like to add a few labels and a combobox to my form, but everytime I add something, or try to add it I get cast error?
Public Class Form1
Dim ListOfCards As New List(Of String)
Dim dealtCards As New List(Of String)
[code].....
I'm a VBA programmer and can do Office integration in Office applications.I'm programming in VB in VSTS 2008 and following these steps to create an Excell application at runtime: [URL] but it is not working.The issue I'm having is when I add the reference, the library is not recognized by VBE intellisense and compiler, so: the code doesn't run.When I use late binding technique and declare variables as objects, the code runs OK, but I don't want that way.I tried adding the references in two different ways:
1 - Menu Project / Add Reference / tab COM / Microsoft Excel 11.0 Object Library / OK
2 - Menu Project / VB Properties / References / Add / Microsoft Excel 11.0 Object Library
Both methods didn't work.
I want to transfer files from one directory to another using streamreader and writer class. Now i want to add a statusbar to show the filename on statusbar along with the remaining percentage. It will reach 100 when file has been moved to new directory.
Dim ioFile As New System.IO.StreamReader("C:sample.csv")
Dim ioLine As String
Dim ioLines As String
[CODE]...
adding to the binding source then setting the combobox to selectedIndex of newly added row is not working.the new row is in there but it does not set the selectedIndex to the specified index. but if I run the code a second time it selects it.what can i do to make sure the combo uses the specified index?
Dim drv As DataRowView = CType(Dispatch.M8CustomersBindingSource.AddNew(), DataRowView)
drv("custID") = "999999"
drv("CustomerName") = "Select Customer"
[code].....
I working on a project wherein i need to merge 2 or more files. but while the program is running or doing the specified descripted job. it seems to be standing still, which may confuse the user that application is not working or not responding. so i want to add a progress bar or anything related to show that the application is still running. can someone explain or tell me how to add this in my program. can you explain me with a simple program or something.
View 1 RepliesFull Program: Option Strict On : Option Explicit On Module Module1
[Code]...
After I ran it, I had a file a.txt in my debug folder but the size is 0 bytes (and when i open it is empty of course) Shouldn't the output had "asd" in it ?
I'm reading a file and then closing it with the following code, but my problem is later when I start a batch process it says the file is still in use. Am I doing something wrong in closing it? The process was working fine prior to my adding this code to read the file.
[code]...
This rexx exec is trying to write to the file that I read from in the prior step before creating a PowerPoint presentation, but fails becuase of the lock.I'm at a loss. I should qualify and say the process actually starts, but fails in the rexxexec after it starts, it isn't failing on the process start the rexx exec issues a message that it can't write to the file becuase it is in use.
It is possible to create progress bar like moilla for winform application code in VB.
View 3 RepliesI have several reports that all merge onto the same datatable. The user can click several to run and then hit the 'find records' button to run them all simultaneously. Since they each take so long, I'd like to update the user on the status bar as each of these stored procedures is called successfully. However, when I call the procedure, i only get one update at the very end listing evertyhing.
[Code]...
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
View 3 RepliesI am trying to implement a BGW and want to report progress to a progress bar for my TextFieldParser program, sometimes if your opening very large files it takes a while and I would like the user to be able to see the progress and have some interaction so they know the program is still running I am a little hung up on what to in the reportprogress
I have:
worker.ReportProgress(0, myReader.ReadFields())
and its not doing anything, I didnt expect it too since ReadFields is an array
parser
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim worker As System.ComponentModel.BackgroundWorker = DirectCast(sender, System.ComponentModel.BackgroundWorker)
[code]....
I am currently trying to develop an application which will backup large folders to a specified destination. To find all the files in the specified 'backup' directory I am using the following code.
[Code]...
I have tried putting my GetFilesRecursive function into a separate background worker to run first so I can update the GUI however I am struggling on how to return the List of found files back to my application (I get cross-threading exception) and how to update the progress bar to show the progress of the GetFileRecursive function so the user knows it is processing the list of files and has not crashed/frozen.
I copied the code here and translate the code to vb [URL]it is working fine but there is one small problem but I cannot solve? Here is my code: SyncClientVB Another Source The scenario is... the progress is reported by an event (OnCopyingFile event)
Public Sub OnCopyingFile(ByVal sender As Object, ByVal e As CopyingFileEventArgs)
If pbFileTransfer.Value <> e.PercentCopied Then
If txtCurrentFile.Text <> e.FilePath Then
txtCurrentFile.Text = e.FilePath
[code]....
The problem is that it is ok when runned but when I click the form it starts to hang but in the console... it is still continuing.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('6f5d1b01659646618ff3bdca29fb1b7f')
get the progress bar show the progress of the batchfile running in the background?
View 10 RepliesI have two forms, when the user selects a button, the second form opens and an external executable begins an automated process. The point of the second form, is to only show the current progress of the automated tasks and closes when those tasks are completed.How would I use a progress bar to show the current progress of an action on a different form without knowing how long it will take?
View 9 RepliesfrmMain - Allows user to pick process or combination of processes they want to run frmProcess - Shows progress of their selection I have three modules. Each runs a specific process. The frmMain allows the user to run any one of the three modules individually or all together in a single process (basically, runs the one after the other until done).
[Code]...
Looked through many tuts, can't find one.
View 1 RepliesI'm trying to use the Shell to have my application call an external application but its not working...I don't understand why. I get the following error: 'System.windows.shell' is a namespace and cannot be used as an expression!
Heres my code....any ideas what I'm doing wrong. Its got to be a simple...stupid error.
Private Sub mnuUpgrade_Click(ByVal Ctrl As Microsoft.Expression.Web.Interop.Legacy.CommandBarButton, ByRef CancelDefault As Boolean) Handles mnuUpgrade.Click
[CODE].....................
I have a filesystemwatcher which place files in a queue when they are created. From the queue the files are further processed (xml into SQL database).
The mechanism works fine, but I want to add a progress bar to follow the progress of the files in the queue: processing 1 of 10......2 of 10......3 of 10 etc.For testing, I created a batch file to simulate the creation of files, so the filesystemwatcher can to his work and place the files in the queue. When I tell the batchfile to simulate the creation of 20 files, I see that the amount of files in the queue change. For example;
[code]...
In the app I'm currently making, I have two progress bars. One for current task being committed and the other is for overall progress.During runtime, I calculate how many tasks are being run and set that as the maximum. As each task completes, the progress bar is incremented by one.
I want the current task progress bar to show the progress of the current task. Some tasks can take a few minutes to complete so that progress bar works great. But, if the task is super quick, like editing registry keys, I see no progress at all.When I edit the registry, it basically goes like this:
'Edit Key
'x
'x
'x
ProgressBar1.PerformStep()[code].....
It completes so quickly that I never see the bar even move.I also have each task report its name into a label and it skips ahead so quickly that I only see the first task name and the last.Is there any way to make this do a better job at reporting the progress?
