I can cheack another instance running r not then i closed the newly created instance
but nw my problem is i need to show the previously running instance if the previous instance minimized or hided
i m using the foolowing code to find the previous instance[code]...
I developing a windows application. i dont want to allow multiple instance of the application how i will achive that?
View 1 RepliesI have a single instance VB 2010 application I know how to communicate with the next instances run through the StartupNextInstance application event. The usual way of working with this is parsing command line arguments of the new instance and continue execution of the old instance. What I would like to do is replace the running instance with the new one. Is there any way to do this other than disabling the single instance property ?
View 1 Repliescreating single instance form in MDI Application. How to check whether form's instance created or not?
View 6 RepliesI'm writing vb.net code with MS Visual Studio 2005.When running my application I get "foo.exe is already running on this machine".(Even though I'm running faa.exe instead
View 14 RepliesI am working on a realtime application where the data is addded to a List(of T) all the time. MB per minute
Elements older than X minutes shall be removed from the beginning of the list to free memory.
As far as i can understand will there be an internal (slow) redim when i add each element after i have reach the number defined with the Capasity metod. (I set that quite big from the start, but the data speed is unpredictable so it can be exceed)
What happens each time i remove and element from the beginning of the list , seems like it takes a lot of time, ? new redim ?
What is the most CPU fficient way of removing 1 or many elements from the beginning of such a list?
My problem is when i try to call Application.Run() in a application without a form i get "Object reference not set to an instance of an object." when i run it outside VS. but if ran in debug or release mode it works just fine. i may just be forgetting to setup application right, but ive done it before in this same manor and it worked fine.
Sub main() 'this runs first.
AddHandler Application.ApplicationExit, AddressOf ExitEventHandler
dbg_f("handle added")
[CODE]...
Commented out init_timer and init_ready, and now it causes the same error for the myName line. there seems to be something wrong with class Application. btw theres seems to be something wrong with the forum code formatting.
given a MDIParent Form and 2 MDI Children: frmChild1, frmChild2..How can i realize a Instance of MyClass in MDIParent, which I can read and write from frmChild1 and frmChild2 , too
View 4 RepliesI am having a text file in this path "C:Test est.txt" when this was openeed I need to close this.
When I am trying to use the below code all the instances of notepad are closing and I don't want that to be happened and I want to close only the ".txt" file:Here is my code:
Dim Process() As Process = System.Diagnostics.Process.GetProcessesByName("notepad")
For Each p As Process In Process
p.Kill()
Next
I use this code but it doesnt seems to work...
If Process.GetProcessesByName(My.Application.Info.ProductName).Length > 1 Then
MsgBox("Program already running!.")
End If
EDIT: ShowInTaskBar = False
in vb 2008 express this option is available under application properties. does anyone know what is its function? does it make it so that it's impossible to open two instances at the same time?
View 3 RepliesIs there any way of restarting a single instance application, which is deployed via clickonce?
View 1 RepliesI am creating a Windows application using VS 2008. This has a MDI Parent form that hosts multiple MDI children forms. I have a login form that authenticates the user and creates an instance of a user class. This has information such as UserID, Name etc. I would like this instance available to other windows. How would I implement this functionality?
View 2 Repliesi am using "Animated Window Effects with "Toast" popup demo" code from the code bank created for jmcilhinney. I put a NotifyIcon control on it and check Make single instance application on the project properties windows. the problem is that every time that i launch the app it creates one instance on the system tray of the app. i can not figure out how to over come this attached is a copy of my project.
View 10 RepliesIn my VB .Net code, I am trying to create to launch MS Project Application. Dim prjApp As Microsoft.Office.Interop.MSProject.Application = New Microsoft.Office.Interop.MSProject.Application
But I am getting the exception as follows:
"Creating an instance of the COM component with CSSID {36D27C48-A1E8-11D3-BA55-00C04F72F325} from the
IClassFactory failed due to the following error: 80010001".Note: This exception happens in 64 bit Windows 7 German OS. But the same code runs successfully in 32 bit Win XP (German and English) and 64 bit Windows 7 English OS.I have even tried the following steps in German 64 bit Win 7
1. Running the application in Administrator mode
2. Setting UAC to low.
3. Re-installing MS Project in German 64 bit Win 7.
I want to learn the Database application programming. Especially, the multi-user environment. User can update the data at the same database. So, could you give me some advices ? Does it should use SQL server db ? How to connect with the the SQL server from other PC user ?
[Code]...
I have a VB .NET application set as single instance. When I try to launch the application the second time its window is restored to its normal windowed state instead of being maximized (like it was before attempting the second launch). How can I make the application window to preserve its last state?
View 1 Repliesassume that i have two forms(form1 and form2)form1 code
Imports System.IO
Public Class Form1
Inherits System.Windows.Forms.Form
[Code]....
I'm trying to build a single-instance application, but not in the traditional sence. Instead of a simple silent prevention of launching a second application, I want it to send a message to said application so it launches a second mainform in my original process.
(I want some read-only cache (language, style,...) shared, and a few sources like local settings shared, but other then that all resources reside in the mainforms and act as seperate applications.)
(I'm not looking for specific code, more for hints/tips and/or general directions, more specificaly on what parameters do you check process equality, and what method do you use to pass the message? Windows Messages? Sockets? ...)
I am writing a class project application that is loadable from within AutoCAD. This application generates an Excel workbook with extracted data. I am having a problem with Excel closing when finished. It seems the Excel instance hangs until my application is unloaded. I have found the section of code that seems to be causing to hang, but I'm not sure why its hanging to prevent it.
Below is a copy of my code for the class (top to bottom with exception of the FileExistValidation method... too many characters ). The code section that is commented out seems to be what is causing it to hang. If I uncomment that, Excel hangs, with it commented out, Excel closes out in the background.[code]...
I need to be able to run multiple instances of a standalone (3rd party) application. This application prevents multiple instances from being ran from within the application. I need to basically override this.
I know it can be accomplished by hexing the original executable, however I would like to stay away from this method as I'd like for other users to be able to use my application from the get go without needing to hex the 3rd party app themselves or me having to send them the hexed app. Is there any way to achieve this or am I just taking crazy pills?
I have set the "Make single instance application" check box.And when my application version is 1.0.0.0 for example, it is OK and won't load multiple instances.But when I create a new version, for example 1.0.0.1, then I can run 2 instances of my application, when the 1st instance is 1.0.0.0 and the second instance is 1.0.0.1.What should I do to prevent this?
View 2 RepliesHas anyone using VB.NET 2010 been able to create a single instance application? I've followed the MSDN sample but it does not have an Application.xaml file. Converting any C# samples to VB doesn't work as I cannot override the Main sub in Application.xaml (C# calls it App.xaml).
View 2 RepliesI wish to turn on the Single Instance Application choice in Visual Studio 2008 properties. To do so, I must choose "Enable Application Framework". When I do that, my ONLY choice is to choose a Startup Form, not a Startup object. This makes no sense to me. I have a tray application, and I check to see which form I should load, a logon form, or the main form. But since I am forced to choose a startup form, I MUST load the logon or main form to begin with. But I don't want to. I want startup code to determine which one to load first. So then I am playing with making the OTHER form invisible, even if the startup form, but that is a mess.
View 4 RepliesI have following instance of System.Collections.Specialized.NameValueCollection:
Dim UserSelection As New System.Collections.Specialized.NameValueCollection
UserSelection.Add("D_Color1", "Black")
UserSelection.Add("D_Color2", "Green")
UserSelection.Add("D_Color3", "Purple")
I need to save this instance to hard disk and then load it back from hard disk as an instance. How do I do that?
D is a dictionary whose entry values are of Type T..What I'm attempting to do is have a delegate like "Serializer" below that I can invoke on an instance of T, such as "Entry.Value" below.Please see the "return Entry..." line below for my wishful thinking.[code]
View 2 RepliesI am looking for a way to make my app running in a single instance mode and showing the MainWindow of the first instance when another instance is launched.I do a quick search on the internet but I did'nt find anything to open the MainWindow of the first instance or it was for Windows Form not for WPF.
View 1 RepliesA while ago, I wrote a web-based guestbook application that wrote it's own database.
My code was very amateurish, but, as it was my very first publication, I was very happy with it. Only about a month after I'd published it did I realize I'd made a huge mistake in the code.
I've only ever connected to a specific named instance of SQL Server, and it occurred to me that, if the SQL Server instance has a different name than the one I specified, it wouldn't work.
So, since my users will probably not know what the name of the instance of SQL Server that's running is, I thought adding a field where the user can specify it would help if they do, but what if they don't? My answer was to get the local instance, regardless of name.
I tried Data Source=.local;, Data Source=.; and other variants, but nothing worked.
I was trying to fill 10 checkedlistboxes with items..So I made a sub with 2 arguments like this Private Sub fill_checkedlistboxes(ByVal items As String, ByVal checkedlistbox As CheckedListBox) End sub the first argument items is a long string whitch splits in the sub into many strings and added them all into the second arguments (thecheckedlistbox) I want to make for next statement to fill all the 10 checkedlistboxes in my form with an 10 long strings held in an array called strings, so i write something like this [code] What i have to write in the "?????" area to have the checkedlistbox that i want? the checkedlistboxes names are checkedlistbox 1, 2 , 3 ....10
View 12 RepliesI have no problem doing a select statement from a database and displaying it.An I have no problem inserting data into a sql database table. However with this issue I have to grab the data an insert it into a totally different SQL 2005 instance.
View 8 Replies