Extended Checkbook Organizer ïBatch Mode Expand the Checkbook Organizer from Assignment #2 to include a batch mode which allows the user to enter transactions by loading from a USER SELECTED FILE. The format of this file should be as follows:
Date|Trans/Check Number|Amount|Type|Description Format Rules:
1. The delimiters MUST be the pipe ( | ) symbol.
2. The Type Code for Transactions MUST be DR for Debit or CR for Credit.
3. Date Format: MM/DD/YY or MM/DD/YYYY
File Example:
01/23/2010|2385|125.76|DR|Purchased groceries at Food Mart
02/05/2010|1050|1578.98|CR|Automated Payroll Deposit
Your application should allow the user to select a transaction file (Hint: An Open File Dialog will be needed). The application should parse the file and load the data into the Transaction Register maintaining the ongoing account, credit and debit balances as before.
Include the same total tracking and navigation from Assignment #2. Assignment Requirements:
1. Windows application that includes all requirements from Assignment #2
2.In addition to the manual transaction entry system from Assignment #2, include a batch loader process that allows the user to select a transaction file (see format above). This transaction file will be parsed and processed into the Transaction Register maintaining all ongoing balances.
3. The Transaction Detail viewing requirement will be carried over from Assignment #2.
4. Navigation will be the same as Assignment #2
5. Provide an Application Design Flow Chart along with a Version Control Section (may be included in the code comments or in a separate document)
6.Provide detailed comments in the code explaining the process and methodology that you use.
Assignment Rubric:
RequirementSectionPoint Value
User Interface Design
� Data Entry for Starting Balance (should only allow this once unless Clear is clicked) AND manual transaction entry
I am writing a program for class that acts like an accounting ledger or checkbook organizer. There are many things that I can't figure out how to make happen.
First- I need a running total of credits and debits at the bottom of the form. I can't figure out how to get that to display. I tried it, but it just locks up the program.
Second- I put in an error handler for non-numeric input and that works but when I want to clear all fields with the clear button it errors each field for not having an entry. I tried 6 ways to Sunday to accept (""), but it messes up other things.
Third- I want 5 transactions to be visible with the ability to have 7. I have hidden the last two and want them to display when the new transaction button is clicked, but can't find anything in my book that would allow that to happen.
Public Class
'Declarations Dim Tran1, Tran2, Tran3, Tran4, Tran5, Tran6, Tran7, TotalCred, TotalDeb As Double Dim NewBal1, NewBal2, NewBal3, NewBal4, NewBal5, NewBal6, NewBal7, BegngBal As Integer
I am running Microsoft Visual Studio 2008 Professional on a Windows 7 system. While working on the visual basic exercise in chapter 4 of the Microsoft Visual Basic 2008 Step by Step book on the MyMenu program I added a Toolstrip to my form and then I was trying to perform the add OpenFileDialog and ColorDialog controls to the component tray as described at the bottom of page 111 under Using Dialog Box Controls. I could never get the controls to appear in the component tray as instructed in the book.
I have a program that plays a video and uses the step function to move frame by frame backwards and forwards through the video. The forward frame works just fine:
AxWindowsMediaPlayer1.Ctlcontrols.step(1)
However, the backwards step (below) jumps a full second backwards while the forwards step only steps .033 seconds forward (presumably a single frame).
AxWindowsMediaPlayer1.Ctlcontrols.step(-1)
I can't find any documentation about this problem online and in fact I can't find much mention of this function.the documentation does say the -1 command should step back one frame. IWMPControls2::step method Is this a known bug or is there an updated function I should be using?
I really need to learn much about it, but always stock up,.DOTNET covers the vb.net, C#, C++, ASP.NET, .NET framework is it right?.C++? ASP.NET?What should be my step by step procedure?
Will I start on database? Connection of client and server? Webrowser? Application?...etc etc etc.Will it ok if i start on studying every toolbox item one by one?
I dont have any project or every assignment that needs to be done....All i want is to learn about DOTNET
coming to the topic i want to learn dotnet i am not good at programming. but i want learn it i m very passionate about it.you all know soo much about DOTNET even i want to become like you people.i have a bit knowledge about this but not much..What should be my first step towards this?How should i start with and from where should i start with?
My need is to work with what I have (2005 studio), what I know (Visual Basic) but need a primer. I am a visual learner (so I need to see [1] how the form is created, named and set up). From there I need to see [2] how he code works so that I can implement from there.
I have a wizard where users need to fill out data. You cannot navigate to the second step until first step is completed.
I enforced this behavior by disabling/enabling "Next" button, but I really do not like this solution, since it seems not really elegant or safe here. What is the good approach on building step-by-step processes with enforcing step completion.
I'm trying to understand how this code work step by step but I'm confusing How the code work when executed from first step to last step?example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age
vb Dim obj As New Minimal obj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString) vb Public Class MinimalPrivate m_Age As Integer Property Age() As Integer Get Age = m_Age End Get
I seem to lost the practice files disk for this book, and I am trying to 're-learn' this book. I am unable to do the lessons without the practice files. If you have the disk and could maybe zip them up and email them to me? I have the other disks still, and am using the Visual Studio Express to do this.
Is this the correct forum for questions regarding code in the Visual Basic 2008 Step By Step? If so I would like to know why there is a declaration for one PictureBox and not the other. If there is a better forum for Michael Halvorson's book, can anyone direct me there?
i would like to ask for little help in here. I developing application for wake on lan and i have group of checkboxes button and i sub with threads. My problem is in button event i would like to run sub only if checkboxes are checked. All works but problem is when i have this rutines in button action then it start threading all the same time. Its very hard to explain. Bassicaly i wanna read this if checkboxes systematicly 1 by 1 from top to down coz right now in my multitexbox(status) they are all mixed and i can't recognize what belong to what.
When I started to work on this new project in vb.net 2010, I put many breakpoints to try to understand the execution order of the project, only to find it in vain. Step into command F11 should work correctly according to Visual Studio 2010: Step Into Property/Function(F11) doesn't work as expected. But I when I pressed F11, I found the code is jumping from one place to another based on breakpoints, not line by line or step by step.To give an example, please see the code below
When I press F11 at line 1, it goes to the property 1. After it returns, when I press F11,it goes to property 3 directly, without accessing the code in line 2 and line 3.I do not understand why the code is NOT executed step by step by using F11. If I put breakpoingts in line 2, then line 2 is executed.So it seems to me that the showed execution order is based on breakpoints! So if I put breakpoints at different places, the showed execution order would be different! Thus, it is impossible for me to really understand the execution order.
I'm trying to understand how this code work step by step but I'm confusing How the code work when excuted from first step to last step? example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age
vb Dim obj As New Minimalobj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString)
I've came up with a clever little idea of mine to make an organizer for myself for my classes. I don't really feel like explaining how exactly it works so I've included a picture, you should get the idea.I've added random labels of random classes as a test. When the add button is clicked, combobox1 and textbox1 become visible. In the scenario that "English" is selected from the combobox, whatever is entered into the textbox will go directly into listbox1 since listbox1 is right under English. Here's the code.
1 Dim text As String 2 text = TextBox1.Text 3 ComboBox1.Visible = True 4 TextBox1.Visible = True
I am currently developing a service using the SharePoint 2010 Client Object Model to programmatically upload Excel worksheets to a Drop Off Library and then set the properties on the file. This process is working well. However, the Drop Off Library is governed by Content Organizer Rules that aren't being applied to the uploaded file. I have examined every property I thought I could have missed: [code] What's most frustrating is that if I edit the document properties using the Web UI and check it back in without making any changes, the file is moved to its final location. What might I have overlooked that is preventing Content Organizer Rules from being applied to newly uploaded files when using SP2010 COM?
Im working on my project. and i just asking if i can used this Property in vb. NET [URL] when i install adobe photoshop .. i see on the leff installer...something like a menu and the menu move step by step when the user move between Forms
Its a League Organizer, basicly ive started it off with 16 teams and end up with 1(winner) 16 box's on the far left, then 8, then 4, then 2, then 1. the 16 box's have "Team 1" "Team 2" etc... ive put a new/clear/open/save button in that order.
BUT this is my problem..when i save(Save Button) the text file saves all the text wrong it ends up like this...Team 1Team 2Team 3Team 4 Etc...
But i want it to save like this
Team 1 Team 2 Team 3 Team 4 Etc...
The code is...
Dim Save As New SaveFileDialog Save.Filter = "Text Files (*.txt)|*.txt|ALL FILES (*.*)|*.*"
I have created a program that randomly produces simple maths questions and saves them to a SQL Server (SQL Server 2008 R2). The code looks fine and works if I step through the program. Each pass it creates a random question answer and saves them to the database. However, if I run it (Debug/Release), the program produces a question and answer but repeats it in the database.
im running this bit of code that only works in step over. i tried running it normally but it didn't work then when i stepped over the code it works fine has anyone ever come across anything like this??
If you try and do the same in a control that inherits Control, you get an error,Keyword is not valid as an identifier. Since Step is a keyword via the For Next statement.
So, how do you achieve the same as the ProgressBar has done in a custom control?
I'm using this functions:Protected Overrides Function ProcessCmdKey(ByRef msg As System.Windows.Forms.Message,[code]the focus goes from cmbProv to txtLoc ignoring txtCP.
I am debugging a VB.NET forms program which calls into properties and methods of a class which is part of the same project. I put a break point in the form code but when I step through, it does not step into the class code.
I want to create a function for use on my ASP.NET 3.5 website that will step through a folder of image files one by one. Each filename found would be checked to see if it met certain conditions (this would involve making checks with the associated SQL Server database). If the file is okay, the function would just move on to the next file. If not, the file would be moved to another folder.I don't know how to define the list of files in a folder.
I have just re-installed VS 2005 on my machine. Now when I want to step through my source in Debug My F8 key doesn't work. I did manage to get an icon on the toolbar that I can click to do it but How do I associate the F8 Function key back to that process?
I am using VS2010 Pro and can no longer see the step into command buttons on the toolbar. That and the step out have disappeared. I know I had many more toolbar buttons across the top that I don't see now but the debug toolbar is checked but there isn't even the step into or step out options to add to the toolbar.
I have recently updated my VS2010 Professional IDE to SP1.
Now the F8 key no longer provides single step functionality (nor does F11). Likewise the F5 key no longer runs the debugger. I can access these actions via mouse using the run and single step icons on the toolbar.
These very important functions have not been restored using any of the Tools|Options settings that I have been able to find.
I have attempted to "repair" the SP1 installation without success...with a number of errors being reported starting with an RiaServices.msi error.
