Connection String Using .net 2005 With Sql Server 2000?
Jan 27, 2010Connection String Using .net 2005 With Sql Server 2000?
View 1 RepliesConnection String Using .net 2005 With Sql Server 2000?
View 1 Repliesconnection string for vb.net2005 and sql server 2000
View 1 RepliesWhat is the connection string for the sql-Server express?
I did this
CODE:
But this connection string is not correct:
CODE:
What will be the correct one?
I've developed a software using VB.net and SQL server 2005. This is the connection string that used. Data Source=MY-PC\SQLEXPRESS;Initial Catalog=studentInformation; Integrated Security=True But now i want to use SQL server compact edition. So what should i change in this connection string?
View 11 RepliesThe CLR has been unable to transition from COM context 0x1b3008 to COM context 0x1b3178 for 60 seconds. The thread that owns the destination context/apartment is most likely either doing a non pumping wait or processing a very long running operation without pumping Windows messages. This situation generally has a negative performance impact and may even lead to the application becoming non responsive or memory usage accumulating continually over time.To avoid this problem, all single threaded apartment (STA) threads should use pumping wait primitives (such as CoWaitForMultipleHandles) and routinely pump messages during lonunning operations.
Sub ExportToExcel07()
Dim cnx As Data.SqlClient.SqlConnection = SqlCnx.SourceDB
[code].....
i wana make a report in which i wana show image saved in db made in Sql Server 2000 as byte array.i've tried in sense i've make dataset and give data source to the crystal report but it doesn't show any image in report.
View 2 RepliesI am tring to make the below application work with SQL Server 2005 Database Currently it works for test.mdb, which is in the same folder with the application. How shoud I modify the MapPath to work with SQL Server.
[Code]...
I making a connection through word 2003 VBA to SQL server 2005 using the following codeDim cn As ADODB.ConnectionSet cn = New Connectioncn.ConnectionString = "Provider=SQLNCLI;Server=LEXAE29150SQLEXPRESS;" & _"Database=MCarter.mdf;Integrated Security=SSPI;"cn.openetc.cn.close.All runs fine up to cn.open.I then get the message error 'Cannot open database "MC.dbf" request by the login. The Login failed'.Tryed websearching but no succes. Been on it a week and the boss is doing his nut. I'm lost and unsure what wrong.The SQL server is set for windows authenticity and SOL Server login.In the MC database under security users my user name (Login) is their and setup as owner and sysadmin.SQLServer is running on the same machine as the word.dot.
View 3 RepliesI have built a client-server VB.net inventory application for our company which connects to our Server machine running on Windows XP. We have 6 client machines running also on Windows XP that connects to the Server's database. Now, my problem is, "How do i connect a client machine running on Windows Vista to our Server running on Windows XP wirelessly?"
- Is there something I have to alter on the SQL Server Surface Area Configuration?
-Or do I have to change the 'Connection String' on my software application so as to properly connect to the Server from a Vista mahine? If then, how?
This is the error its throwing:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)"
3 years ago I developed a vb.net application that connect to sql express 2005 data base.The application worked fine.e replaced our computers, so we installed the application again. (The same exe file, the same sql server and so on).Now, only when loading few forms I receive the following message: n error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Note that when we log in to the application, a connection is needed. The user verifying is working fine; it means that the connection is working properly.
View 1 RepliesI want to know how to connect sql server 2005 to vb.net windows application
1)is there any connection string ?
2)if so i am using windows authendication in sql server 2005 management studio so am not entering any user id and
password to enter in sql server
3)so what should be the userid and password for the connection string can any one send me a sample code that i can refar
am working on a project and am using sql server 2005 express as my database server, the problem is i can;t connect to the sql server from any machine on my local network (windows).
Below is my connection string
con.ConnectionString = "Data Source=webserver1SQLEXPRESS;AttachDbFilename='C:POSM_DB.mdf';Integrated Security=True;Connect Timeout=30;User Instance=True;"
It works all right on the development machine but not on network, i think it has something to do with the network.
I have installed sql server 2005 in my machine which is installed vb.net 2008. I want my machine to distribute the database to the clients and make it as server.I don't have that much knowledge of how to overcome this issue as i am awfully naive about it.Let me start it here:I have got an application in vb.net...at first i was using ms access database 2007. then decided to switch on to the sql server since i want to distribute the database to the clients who are going to use my application.When i installed the sql server, i imported my access db files onto sql server database. i enabled tcp/ip as enable in the sql server network Configuration. i want use sql server windows authentication as my default user account of my system for the sake to simplify the issue.
Hence, i connected the sql server into the vb.net through the "add new data source".am done with that...the problem is how do i assign the connection string to the vb.net? Or how do i include a connection string in vb.net which tells every other computer that the database data source is in my computer so that every computer can automatically check it in the network.Where exactly shall i put the connection string...as far as my knowledge is concerned for access database, you can easily identify your connection string in project /properties/settings...it goes here and you put your database in any where.And what is the best connection string do i need for sql server 2005..computers are running windows xp.
I am trying to connect a VB.NET 2003 Oledbdataadapter through the wizard to a SQL Server 2005 Database, but i get an error message during the wizard.These are my steps:New Connection, Select provider (Microsoft OLE DB Provider for SQL Server), Select Connection:server name, log on: use windows NT integrated security, select database. I do all these steps then click "test connection" and it is fine, but when I click "ok" and error message pops up."Unable to connect to database. It is only possible to connect to SQL Server Desktop Engine databases and Microsoft Access Databases with this version of visual studio."
View 3 RepliesI'm having problems tring to connect to the sql server 2005 express with and vb 2008 express.
I keep getting this error and here is the code too:
Login failed for user 'CHRIS-ARTZGuest'
connFabList = New SqlConnection("Data Source=CHRIS-ARTZ;Database=FabList.mdf;Integrated Security=True;")
i need to know about how to build connection with server and client? eg: my server is 140.134.5.1 and my client need to connect to it to do communication,how should i do?
View 6 RepliesI have configured Sql Server Express on a server, Enabling TCP/IP and Named Pipes to accept remote connections. However when i attempt to connect from VB.net on another PC on the same network I get the following Error: Failed to login user "ServerNameUser".
Can anyone offer some server setting and a ADO.NET Connection string. The attached file has the Sql Server Settings.Attached Files sqlRemoteConfig_Current.txt (806 Bytes, 70 views)
I am creating database application in VB 2008.How am i find the connection-string for that application?what are facts that i have to include in connection-string?
View 2 RepliesMy application is VB.net 2008 with sql server 2008 , the application is working on the server . whereas in the client i got the error which i attached below Error" A Network - Related or instance - specific error occurred while establishing a connection to sql server. The server was not found or was not accessible.Verify that instance name is correct and that sql server is configured to allow remote connection"
View 1 RepliesI am using following code to edit my connection string [code] on dbSQLServerTestDataSet1.tblContact part of the line.These objects do exits in my project. I have also imported System.Data and System.Data.SqlClient.
View 1 RepliesI have two databases, one on my local work computer and other on a server. Both have been created with Microsoft SQL Server 2008. I can access both of them with connection strings that contains names of the servers and some other information. However the names contain only the ip-number of the server. And I need the full name of the server and the instance created, separated with "" character. I can see them in my SQL management studio but I need to get them from VB-code.I created SqlConnection-class but it finds only the ip-addressed name. SqlSourceDataEnumerator won't do good because it finds all unnecessary server names that I don't need. How can I find the real name of the server that is specified in the connection string?
View 5 RepliesI want to create a client-server application, it means I just need 1 database on the server.I have a computer and a laptop. I set my laptop's IP to 192.168.1.1 and my computer's IP to 192.168.1.2.Now I place the database on my computer, the database name is db_transportasi.Problem is, how to connect my computer's database from my laptopSpecification :I'm using this string below for my connection :Data Source=ARVID-THEODORUSSQLEXPRESS;Initial Catalog=DB_TRANSPORTASI;Integrated Security=TrueI already setup my SQL Configuration Manager, enabled the TCP/IP, switch to the IP Addresses tab and set the IPAII Port Properties to 2301I turned off my firewall so I don't have to set any exceptionQuestion
View 4 RepliesI get this error when I try to connect to my database. I used the same string provided in the database explorer "Connection String"
I do not have a password on the database.
This is a local database if that makes a difference
How to make Dynamic Connection string for VB.Net 2008 & Sql Server 2005 database
View 1 RepliesWhere / how save a dinamic connection string to SQL Server?
View 4 RepliesI built a window's app in VB. The app is made to be used worldwide. The app works fine when it is installed on a computer using the same network than the local machine hosting the sql database. The problem actually, is that, when the app is installed on a computer using a diferent network, the connection fails.
[Code]...
Between ODBC and OLEDB providers, which one is more flexible at both the application level, and at the report level using crystal report?
View 1 RepliesUsing - VB2008 Express, XP Pro,
Connecting to SQL 2005 across the internet
The walk throughs have several good explanations although I don't see any about connecting over the internet.
I used the wizard in VB 2005 to add my database. Under the "Applications Settings" area in VB my string is currently set to:
[Code]...
what is the connection string for Access for connecting Access Database with ADO.NET (For win app).
View 1 Replies